FNW X410C User Manual
Figure X410C
BRASS BODY BALL VALVES
LOW LEAD COMPLIANT 2 PC 600 WOG
GAS APPROVED BALL VALVE
Features:
• 600 WOG
• Full Port
•
(Annex G references NSF 372)
• CSA Approved
• Meets MSS SP-110 Standards
• Blow-out Proof Stem
• Adjustable Packing
• Threaded NPT Ends Per ANSI B 1.20.1
• Optional Lock Lever Kit
• Optional Stem Extension Kit
• Optional Tee Handle Kit
• Optional Oval Handle Kit
• Optional Memory Stop Kit
NOT RECOMMENDED FOR BURIED SERVICE
Figure Number Matrix
FNW X410C Size
SIZE CODE
1/2" = D
1-1/4" = H
3/4" = F
1-1/2" = J
1" = G
2" = K
2-1/2" = L
3" = M
4" = P
Kit Codes (Order Separately)
FNW 410A Kit Size
KIT TYPE
Replacement Handle = BRYLWH
Locking Lever = LHK
Stem Extension = SE
Tee Handle* = THK
Oval Handle* = OHK
Memory Stop = MSK
* NOTE: Due to the higher torque requirements of larger valves, use
of Tee and Oval handles on valves larger than 1-1/2” can be
SIZE CODE
1/2" = BD
3/4" – 1" = FG
1-1/4" – 1-1/2" = HJ
* 2" = KP
Accessories
Replacement Handles
Locking Handle Kits
potable water systems that have a weighted average
lead content ≤ 0.25% per the Safe Drinking Water Act
(Sec. 1417) amended 1-4-2011 as well as other state
regulations.
Stem Extension Kits Oval Handle Kits
Tee Handle Kits
LOW
LEAD
COMPLIANT
Memory
Stops
NSF / ANSI
61-8, 372
Gas Approvals
• CSA Class 3371-08, ANSI Z21.15/CSA9.1, 1/2 PSIG, -40°F - 125°F
• CSA Class 3371-10, CGA 3.16, 125 PSIG, -40°F - 149°F
• CSA Class 3371-12, CGA CR91-002, 2-5 PSIG, -40°F - 125°F
• CSA Class 3371-88, ANSI Z21.15/CSA9.1, 1/2 PSIG, -40°F - 125°F
• CSA Class 3371-92, ASME B16.44, 5 PSIG, -40°F - 125°F
• CSA Class 3371-94, ASME B16.33, 125 PSIG, -20°F - 150°F
www.fnw.com
Figure X410C
BRASS BODY BALL VALVES
LOW LEAD COMPLIANT 2 PC 600 WOG
GAS APPROVED BALL VALVE
13
8
11
A
9
HE
10
7
AE
H
STEM EXTENSION KIT
AL
HL
D
6
2
4
3
L
1
LOCKING LEVER KIT
Dimensions (inches) & Weights Standard Materials
SIZE ØD A L H Wt. (Lbs)
1/2 0.50 3.15 2.13 1.50 0.40
3/4 0.75 4.33 2.48 1.85 0.74
1 0.98 4.33 2.99 2.05 1.03
1-1/4 1.26 5.12 3.35 2.36 1.61
1-1/2 1.50 5.12 3.62 2.56 2.11
2 1.97 7.87 4.25 3.11 3.83
SIZE AL HL AO HO AT HT AE HE
1/2 3.27 1.74 2.76 1.52 2.60 1.42 2.95 4.35
3/4 4.33 2.13 3.54 1.87 3.31 1.77 3.94 4.84
1 4.33 2.33 3.54 2.07 3.31 1.97 3.94 5.04
1-1/4 5.24 2.67 4.33 2.38 3.94 2.28 4.92 5.31
1-1/2 5.24 2.87 4.33 2.58 3.94 2.48 4.92 5.31
2 7.99 3.58 5.35 3.23 4.72 3.11 7.87 6.06
Ref.
Description Material Qty Remarks
No.
1 Body
2 Ball
3 End Cap C46400 Lead Free Brass 1
4 Seat PTFE 2
6 Stem ASTM B16-C36000 1
7 Stem Packing PTFE 1
8 Handle ASTM A283-D Steel 1 Zinc Plated
9 Handle Sleeve Vinyl 1
10 Thrust Washer PTFE 1 2" only
11 Packing Gland ASTM B16-C36000 1
13 Handle Nut AISI-1010 Steel 1 Zinc Plated
C46400 Lead Free Brass
C46400 Lead Free Brass
(Chrome Plated)
AT
TEE HANDLE KIT
AO
OVAL HANDLE KIT
1/2"–1-1/2"
1
2”
1/2"–3/4" Solid
1
1"–2" Shell
HT
HO
DOC: FNWX410C Ver. 10/2018
© 2018 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
Loading...