FNW V100 User Manual

232

Visit us at www.fnw.com

Positioners

ACTUATION ACCESSORIES

VACV100P&V100EPOSITIONERS

Features:

• Sturdy Construction

• Force Balance Design

• Easy Maintenance Pilot Valve

• Large Arrow Position Indicator

• Stainless Steel Cam

• I/P Test Point Facilitates
Positioner Loop Testing

• Modular Design

• Simple Calibration

• External Zero Adjustment

• Built-in Gauge Ports

• Captured Stainless Steel
Cover Screws

• Sealed Cover

• Replaceable Drive Spindles

Drive Shaft

The V100 series positioner is available
in pneumatic or electro-pneumatic
con gurations. The durable, modular
design and wide assortment of options
for the V100 makes the positioner easy
to  eld convert in a matter of minutes.

FNW supplies pneumatic and electro­pneumatic positioners for both quarter­turn and linear actuators. Contact FNW
for optional postioner con gurations
such as explosion-proof, intrinsically
safe, reverse acting, feedback units,
gauge kits, and characterized cams
including split range, equal percent, and
square root degree combinations.

233

Visit us at www.fnw.com

Positioners

ACTUATION ACCESSORIES

VACV100P&V100EPOSITIONERS

SPECIFICATION V100P V100E

Input Signal 3-15 PSI (20-1000 kPa) 4-20mA
Linearity < 0.7%* < 1.0%*
Hysteresis < 0.4%* < 0.6%*
Repeatability < 0.3%* < 0.5%*
Pressure Gain 750 P

OUT

/ P

IN

Air Delivery

@ 29 PSI (0.2 MPa) 9.5 SCFM (269 SLPM)
@ 87 PSI (0.6 MPa) 28.3 SCFM (801 SLPM)
@ 145 PSI (1.0 MPa) 47.1 SCFM (1,334 SLPM)

Blead Rate

@ 29 PSI (0.2 MPa) 0.18 SCFM (5 SLPM) 0.2 SCFM (5.7 SLPM)
@ 87 PSI (0.6 MPa) 0.53 SCFM (15 SLPM) 0.6 SCFM (17.0 SLPM)

@ 145 PSI (1.0 MPa) 0.88 SCFM (25 SLPM) 1.0 SCFM (28.3 SLPM)
Max. Supply Pressure 145 PSI (1.0 MPa)
Temperature Range -40ºF to +185ºF (-40ºC to +85ºC)
Air Connections 1/4" NPT
Gauge Connections 1/8" NPT
Cable Entry 1/2" NPT
Weight 3.5 Lbs. (1.59 kg) 3.8 Lbs. (1.72 kg)
Housing Die Cast Aluminum
Surface Treatment Electrostatically Applied Polyester
Fasteners Stainless Steel
Ingress Protection IP66 / NEMA4X
Mounting Pad F05
Drive Spindle NAMUR
* Percent of full scale

TechnicalSpecications