FNW NE User Manual

Figure NE

GASKETS

150# NEOPRENE

FULL FACE GASKETS

Features

Neoprene (Chloroprene Rubber) has excellent resistance to oils, ozone, sunlight and
aging with low permeability to gases. It is recommended for use with gasoline and
non-aromatic solvents. Neoprene gaskets offer little resistance to and should not be
used in strong oxidants, and aromatic and chlorate hydrocarbons.

Standards

• Meets ASME B16.21 for 150# gaskets

• Dimensions: ASME B16.5

Service Limits

• Max. Temperature: 170°F (77°C)

• Min. Temperature: -20°F (-29°C)

PRESSURE

150# = 1

Typical Physical Properties

Property Value

Durometer Hardness 65 Shore A ±5
Tensile 500 PSI
Elongation 300%
Density 93~100 lbs/ft³
Compressibility 20~30%
Finish Smooth
Color Black

Properties and application parameters shown on this data sheet are typical. Failure to select proper sealing
products could result in property damage and/or serious personal injury.

Figure Number Matrix

FNW NE 1 FFG A Size

TYPE THICKNESS

Full Face Gasket = FFG 1/8” = A

1/2 = D
3/4 = F

1 = G
1-1/4 = H
1-1/2 = J

SIZE CODE

2 = K

2-1/2 = L

3 = M
4 = P
5 = S

6 = U

8 = X
10 = 10
12 = 12
14 = 14

16 = 16
18 = 18
20 = 20
24 = 24

DOC: FNWNE13 Ver. 7/2013

© 2013 - FNW. All rights reserved.
The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA 23609 www.fnw.com

The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and