Thermal Imaging
Fluke Ti40FT and Ti45FT IR FlexCam®
Thermal Imagers with IR-Fusion®
Technology
The versatile choice for
maintenance and
production engineers and
technicians
The Fluke Ti4x models feature everything
needed for virtually every thermography task.
With a 160 x 120 detector and a temperature
sensitivity down to 0.08°C (80mK) (NETD) they
deliver high resolution images where even the
smallest temperature differences can be seen.
The units are extremely easy to use through the
Windows® CE menu structure and offer an
extended troubleshooting feature set to allow on
the spot analysis in the field.
The FT models feature the innovative IRFusion® technology. IR-Fusion captures a
visible light image in addition to the infrared
image and takes the mystery out of IR image
analysis. It helps to better identify and report
suspect components and enable the repair to be
done right the first time. To find out more select
IR-Fusion on the side navigation of this page.
Typical applications:
● Predictive maintenance – Identify
electrical and mechanical problems
before they cause failure
● Industrial maintenance – Check
whether repairs have been performed
successfully
● Quality control – Examine prototypes
and refine thermal management
designs
● Process monitoring – Real-time
observation to ensure efficient and safe
operation
Thermal Imaging
Fluke Ti40FT and Ti45FT IR FlexCam® Thermal
Imagers with IR-Fusion® Technology
See exactly what you are viewing
Fluke IR-Fusion® technology links a real world visual image with a thermal
image. It merges the two images into one, with the possibility to blend
between the two images or create picture-in-picture combinations. Alarm
limits can be superimposed over the visible light image to exactly pinpoint
the components exceeding a specified temperature limit. Both the visual
images and thermal images are available for use in reports. This speeds up
documentation by reducing the need to look for individual images taken with
a separate digital camera. IR Fusion helps to better identify and report
suspect components and enable the repair to be done right the first time.
Large, sharp thermal images
Thanks to the largest display (five-inch) available on this type of thermal
imager in combination with low-noise VOx sensors, the Fluke IR FlexCam
units produce exceptionally high-quality images making even the smallest
temperature differences visible. This is comparable with images normally
only obtained on far more expensive instruments.
A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture
images in areas with poor accessibility. The display remains clearly visible
while viewing over high objects, under a machine or around immoveable
obstructions. The SmartFocus wheel simplifies getting a stable and sharp
image. No need to take your hand off the instrument to turn a focus ring.
Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems.
The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This
way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images
containing the anomalies.
Analysis and reporting comes standard
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis,
annotation and reporting tools. It even allows for customized reports to accommodate specific company work
processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the
side navigation of this page.
Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points
that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like
emissivity or temperature range either in the field on the camera or in the office using the PC software.
•
High resolution, low noise VOx detector for high quality images 160 x 120
Ti45FT Ti40FT
Temperature range to cover broad industrial applications -20 to + 600 ° C (-4 to 1112 °F)
High temperature option
High thermal sensitivity for viewing even the smallest temperature
differences
180º articulating flexible lens to view images in every situation • •
Choice of 3 interchangeable lenses to cover every application • •
Large 5" high contrast color LCD for a clear picture independent of lighting
conditions
1200 ºC (2192
ºF)
≤0.08 ºC (80 mK)
• •
•
≤0.09 ºC (90
MK)
Fully radiometric for detailed temperature analysis and tracking • •
SmartFocus for best image quality and accurate temperature measurements • •
Windows® CE based menu structure for ease of use • •
Personalized instrument set-up for multiple use • •
CompactFlash memory cards to store over 1000 IR images plus fully
radiometric temperature data
SmartView reporting and analysis software included • •
AutoCapture for making intermittent problems visible • •
On-board analysis functions • •
User defined text annotations for simplified reporting • •
Built-in visible light (digital) camera • •
IR/Visible Alarm function •
Laser pointer for easy targeting • •
Flash and torch light for high quality images in dark environments • •
• •
Fluke Ti5xFT and
®
Ti4xFT FlexCam
Thermal Imagers
The experts’ choice for
problem solving and
preventive/predictive
maintenance
Technical Data
Features
High resolution, low noise VOx
detector for high quality images
Temperature range to cover broad
industrial applications
High temperature option
High thermal sensitivity for viewing even
the smallest temperature differences
180 ° articulating flexible lens to
view images in every situation
Choice of 3 interchangeable lenses to
cover every application*
Large 5 inch high contrast color LCD
for a clear picture independent of
lighting conditions
Fully radiometric for detailed
temperature analysis and tracking
SmartFocus for best image quality and
accurate temperature measurements
Windows CE based menu structure
for ease of use
Personalized instrument set-up for
multiple person use
CompactFlash memory cards to store
over 1000 IR images plus fully
radiometric temperature data
SmartView™ reporting and analysis
software included
AutoCapture for making intermittent
problems visible
On-board analysis functions
User defined text annotations for
simplified reporting
Built-in visible (visual) light camera
IR-Fusion blending thermal and
visible light images
IR/Visible Alarm function
Laser pointer for easy targeting
Flash and torch light for high quality
images in dark environments
*10 mm and 54 mm lenses are optional and are only available at time of initial order.
Ti55FT Ti50FT Ti45FT Ti40FT
320 x 240 160 x 120
-20 °C to
+600 °C (-4 °F
to 1112 °F)
≤0.05 °C at
30 °C (50 mK)
-20 °C to
+350 °C (-4 °F
to 662 °F)
–
≤0.07 °C at
30 °C (70 mK)
+600 °C (-4 °F
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• • • •
• •
• •
• •
• • • •
• • • •
• •
• • • •
• • • •
-20 °C to
to 1112 °F)
1200 °C
(2192 °F)
≤ 0.08 °C at
30 ° C (80 mK)
-20 °C to
+350 °C (-4 °F
to 662 °F)
–
≤ 0.09 °C at
30 ° C (90 mK)
The Fluke Ti5xFT and Ti4xFT models
feature everything needed for virtually any
thermography task.
All Fluke FlexCam Thermal Imagers come
standard with the patent-pending Fluke
®
IR-Fusion
Technology fusing visual (visible
light) images with infrared images.
SmartView™ IR analysis and reporting
software is included with each purchase
along with free software upgrades for
the life of your product.
The Ti4xFT models feature 160 x 120
detectors and temperature sensitivity
(NETD) down to 0.08 °C (80 mK) in the
higher end model.
The Ti5xFT models feature 320 x 240
detectors and temperature sensitivity
(NETD) down to 0.05 °C (50 mK) in the
higher end model.
Choose Fluke FlexCam Thermal Imagers
when you need industry leading thermal
sensitivity for high resolution, ultra
high-quality images.
Typical applications:
Troubleshooting—Pinpointing the location of
•
specific problems in equipment and systems.
Preventive/predictive maintenance—
•
Identify electrical and mechanical problems
before they cause failure.
Industrial maintenance—Check whether
•
repairs have been performed correctly.
Process monitoring—Real-time observa-
•
tion to ensure efficient and safe operations.
Quality control—Examine prototypes and
•
refine thermal management designs.
• Research and development—Quantify
heat patterns to improve product designs
(Ti5XFT models).
• Electronic design—Circuit board analysis
(Ti5XFT models).
Detailed specifications
Detailed Specifications
Fluke Ti55FT Fluke Ti50FT Fluke Ti45FT Fluke Ti40FT
Imaging performance
Field of view (FOV)* 23° horizontal x 17° vertical
Spatial resolution (IFOV)* 1.30 mrad 2.60 mrad
Min focus distance* 0.15 m (5.9 in)
Thermal sensitivity (NETD) ≤ 0.05 °C at 30 °C (50 mK) ≤ 0.07 °C at 30 °C (70 mK) ≤ 0.08 °C at 30 °C (80mK) ≤ 0.09 °C at 30 °C (90mK)
Detector data acquisition/
image frequency
Focus SmartFocus; one finger continuous focus (manual)
IR digital zoom 2x, 4x, 8x 2x 2x —
Detector type 320 x 240 Focal Plane Array, Vanadium Oxide (VOx)
Spectral band 8 µm to 14 µm
Digital image enhancement Automatic full time enhanced
On camera operating
modes
Visible light camera 1280 x 1024 pixels, full color
Visible light digital zoom 2x, 4x 2x 2x —
Temperature measurement
Calibrated temperature
range
Optional—High temperature — — Up to 1200 °C (2192 °F)
Accuracy ± 2 °C or 2 % (whichever is greater)
Measurement modes Centerpoint, center box
Emissivity correction 0.1 to 1.0 (0.01 increments)
Image presentation
Digital display 13 cm (5 in) diagonal large high-resolution digital display
LCD backlight Sunlight readable color LCD
Video output RS170 EIA/NTSC or CCIR/PAL composite video
Palettes Grayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted
Optical lenses
54 mm telephoto lens High precision Germanium lens
Full thermal, full visual light or merged
-20 °C to 600 °C (-4 °F to
1112 °F) in three ranges
Range one =-20 °C to
100 °C (-4 °F to 212 °F)
Range two = -20 °C to
350 °C (32 °F to 662 °F)
Range three = 250 °C to
600 °C (482 °F to 1112 °F)
(area min/max, average),
moveable spots/boxes,
user defined field/text
annotations, automatic hot
and cold point detection,
visible color alarm above
and below
Spatial resolution (IFOV): 0.47 mrad Spatial resolution (IFOV): 0.94 mrad
60 Hz/60 Hz 30 Hz/30 Hz
Uncooled Microbolometer
thermal-visual images.
Picture-in-Picture
-20 °C to 350 °C (-4 °F
to 662 °F) in two ranges
Range one = -20 °C to
100 °C (-4 °F to 212 °F)
Range two = -20 °C to
350 °C (32 °F to 662 °F)
Centerpoint, center box
(area min/max, average)
Field of view (FOV): 9° horizontal x 6° vertical
Min focus distance: 0.6 m (1.97 ft)
160 x 120 Focal Plane Array, Vanadium Oxide (VOx)
Uncooled Microbolometer
Full thermal, full visual light or merged thermal-visual
images. Picture-in-Picture
-20 °C to 600 °C (-4 °F
to 1112 °F) in three ranges
Range one = -20 °C to
100 °C (-4 °F to 212 °F)
Range two = -20 °C to
350 °C (32 °F to 662 °F)
Range three = 250 °C to
600 °C (482 °F to 1112 °F)
Range 4 = 500 °C to
1200 °C (932 °F to 2192
°F)
Centerpoint, center box
(area min/max, average),
moveable spots/boxes,
user defined field/text
annotations, automatic
hot and cold point
detection, visible color
alarm above and below
-20 °C to 350 °C (-4 °F
to 662 °F) in two ranges
Range one = -20 °C to
100 °C (-4 °F to 212 °F)
Range two = -20 °C to
350 °C (32 °F to 662 °F)
—
Centerpoint, center box
(area min/max, average)
2 Fluke Corporation Ti5XFT and Ti4XFT Thermal Imagers with IR-Fusion
General specifications
Ordering information
FLK-Ti40FT-20 IR FlexCam Thermal Imager with IR-Fusion
FLK-Ti45FT-20 IR FlexCam Thermal Imager with IR-Fusion
FLK-Ti50FT-20 IR FlexCam Thermal Imager with IR-Fusion
FLK-Ti55FT-20 IR FlexCam Thermal Imager with IR-Fusion
Included with product
Heavy duty carrying case, 2 rechargeable
battery packs, battery charger, ac adapter
(for Ti45FT and Ti55FT only), video cable,
512 MB compact flash card, compact flash
card reader and USB cable, PCMCIA
compact flash card reader, neck strap,
printed getting started guide, SmartView
reporting and analysis, software on CD,
complete user manual on CD
Fluke Ti55FT Fluke Ti50FT Fluke Ti45FT Fluke Ti40FT
Optical lenses (continued)
10.5 mm wide angle lens High precision Germanium lens
Field of view (FOV): 42° horizontal x 32° vertical
Spatial resolution (IFOV): 2.45 mrad Spatial resolution (IFOV): 4.9 mrad
Min focus distance: 0.3 m (0.98 ft)
Image and data storage
Storage medium Compact flash card stores over 1000 IR images (512 MB card standard)
File formats supported 14 bit measurement data included. Exportable Images: bmp, gif, jpg, png, tiff;
Data formats: comma separated (csv), tab separated (txt).
Interface and software
Interface Compact flash card reader included
Software SmartView; Full analysis and reporting software included
Laser
Classification Class II
Laser targeting Laser dot visible on screen when blending thermal and visible image
Controls and adjustments
Set-up controls Date/time, temperature units C/F, language, scale, LCD intensity (high/normal/low)
Image controls Level, span, auto adjust (continuous/manual)
On-screen indicators Battery status, target emissivity, background temperature and realtime clock
Power
Battery type Li-Ion smart battery, rechargeable, field-replaceable (two included)
Battery operating time Two hours continuous operation (per battery)
Battery charging Two bay intelligent charger powered via ac outlet
Continuous ac operation AC adapter 110/220 V ac,
50/60 Hz
— AC adapter 110/220 V ac,
50/60 Hz
—
Power saving Automatic shutdown and sleep modes (user specified)
Environmental and mechanical design
Operating temperature -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature -40 °C to +70 °C (-40 °F to 158 °F)
Relative humidity Operating and storage 10 % to 95 %, non-condensing
Water and dust resistant IP54
Weight (including batteries) 1.95 kg (4.3 lb)
Camera size (H x W x D) 162 mm x 262 mm x 101 mm (6.5 in x 10.5 in x 4.0 in)
Other
Warranty Two-years
*Standard 20 mm Germanium lens
3 Fluke Corporation Ti5XFT and Ti4XFT Thermal Imagers with IR-Fusion
Fluke. Keeping your world
up and running.
®
Loading...