Fluke T+, T+PRO Data Sheet

T+ and T+PRO

Electrical Testers

Safer than traditional solenoid testers

and fully compliant with NFPA 70E

These electrical testers have all the advantages of traditional
solenoid testers, with none of the typical drawbacks. Use all
3 voltage detection methods – light, sound, and vibration, to
work more efficiently in noisy environments, dimly lit areas, or
tight spaces. Built-in flashlight, GFCI trip capability, and the
legendary ruggedness you expect from Fluke, make these an
excellent choice for most residential, commercial, and indus­trial applications.
The Fluke T+PRO is the choice for the demanding commer­cial and industrial electrician. This full-featured electrical tester
includes voltage and continuity measurement, a Rotary Field
Indicator, resistance, and a digital display with 0.1 V resolution.
The Fluke T+ is the basic electrical tester for residential elec­tricians and HVAC technicians, who need a durable, reliable
tool for testing voltage and continuity.

1

Technical Data

Features and Benefits

• 3 forms of ac/dc voltage detection: light, sound, and vibration for
added user protection and convenience

• Detect live voltage even when the battery is dead

• Extra heavy-duty, replaceable test leads for more flexibility and

durability

• CAT IV 600 V, CAT III 1000 V rated for added user protection

• Continuity beeper

• Bright LED flashlight for work in poorly lit areas

• GFCI Trip

• On/Off switchable beeper, selectable according to your environment

• Compliant with latest NFPA 70E recommendations

(continued on the next page)

1

When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.

1

Features and Benefits contd.

• Replaceable test probes for added flexibility and
convenience

• Convenient probe storage on the back

• Probe holder for easier testing

• Hazardous voltage warning light for added user

protection

•

Test lead strap included for better test lead
management

•

AC/DC Voltage: 12 V to 600 V on LED bar, 10.2 V
to 600 V on LCD (LCD on T+PRO only)

• Auto-off saves battery power

• Two-year warranty

Specications

Added functionality available only
on the T+PRO

• Backlit LCD display for easier viewing

• Display resolution of 0.1 V, ideal for

troubleshooting low-voltage lighting

• Resistance (Ohms) to 9.99 kOhms

• Rotary Field Indication

• Display Hold for easier viewing in hard-to-test

areas

Temperature

Operating -10 °C to 55 °C (14 °F to 131 °F)
Storage

Relative humidity 0 °C to 30 °C (32 °F to 86 °F): 90 %

Altitude

Operating 2,000 m (approx. 6,561.6 ft)
Storage 10,000 m (approx. 32,808.4 ft)

Battery type/life AAA (2); 40 hours
Shock, vibration Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
Safety ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1

AC Bandwidth 45 Hz to 66 Hz
Maximum working voltage 1000 V ac/dc
Maximum measurable voltage 600 V ac/dc
Duty cycle Indefinitely for voltages up to 240 V

1

When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.

-30 °C to 60 °C (-22 °F to 140 °F)

30 °C to 40 °C (86 °F to 104 °F): 75 %
40 °C to 50 °C (104 °F to 122 °F): 45 %

Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV
Compliance to NFPA 70E

For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
For voltages above 240 V the tester must connect to a voltage source only for a

MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s

1

2 Fluke Corporation Fluke T+ and T+PRO Electrical Testers

Specications cont.

Voltage hazard LED LEDs turn on at voltages > 30 V ac/dc ± 35 %
LED voltage indication levels 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V
LED voltage indication levels for

Canadian version
LEDs LEDs turn on between 70 % and 85 % of the indicated voltage on the LED, except

Accuracy

AC voltage ± (3 % rdg + 2 digits)
DC voltage ± (2 % rdg + 2 digits)
Resistance ± (5 % rdg + 3 digits)

LCD Resolution 0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V

GFCI Test current 100 V to 200 V at 20 mA to 35 mA for 1 s
Standard input test current < 5 mA
Size (HxWxL) 3.3 cm x 5.46 cm x 19.3 cm (1.3 in x 2.15 in x 7.6 in)
Weight 0.28 kg (9.9 oz)

12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 347 V, 480 V, 600 V

for the 12 V LED which turns on between 50 % and 100 %

0.01 kΩ for resistance measurement (For T+PRO Only)

Ordering information

T+PRO Electrical Tester
T+ Electrical Tester
T+PRO-1AC KIT Electrical Tester and AC

Voltage Detector Kit

Ordering information in
Canada*

T+PRO CAN Electrical Tester
T+ CAN Electrical Tester
T+PRO CAN-1AC KIT Electrical Tester and AC

Voltage Detector Kit

Includes:

Test leads and probes
Two AAA batteries
Test lead strap for managing leads

Optional accessories

• H3 Belt Holster

TP2 replacement test probes

•

*For Canadian customers, voltage indication is provided for 347 V

3 Fluke Corporation Fluke T+ and T+PRO Electrical Testers

Fluke. Keeping your world
up and running.

Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2007-2014 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 5/2014 2812661B_EN

Modification of this document is not permitted
without written permission from Fluke Corporation.

®