Fluke PAC 91 User Manual

LIMITED WARRA NT Y & LIMITAT ION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and
workmanship under normal use and service. The warranty period is one
year and begins on the date of shipment. Parts, product repairs and
services are warranted for 90 days. This warranty extends only to the
original buyer or end-user customer of a Fluke authorized reseller, and
does not apply to fuses, disposable batteries or to any product which, in
Fluke’s opinion, has been misused, altered, neglected or damaged by
accident or abnormal conditions of operation or handling. Fluke warrants
that software will operate substantially in accordance with its functional
specifications for 90 days and that it has been properly recorded on non­defective media. Fluke does not warrant that software will be error free
or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused
products to end-user customers only but have no authority to extend a
greater or different warranty on behalf of Fluke. Warranty support is
available if product is purchased through a Fluke authorized sales outlet or
Buyer has paid the applicable international price. Fluke reserves the right to
invoice Buyer for importation costs of repair/replacement parts when
product purchased in one country is submitted for repair in another country.

Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the
purchase price, free of charge repair, or replacement of a defective product
which is returned to a Fluke authorized service center within the warranty
period.

To obtain warranty service, contact your nearest Fluke authorized service
center or send the product, with a description of the difficulty, postage and
insurance prepaid (FOB Destination), to the nearest Fluke authorized
service center. Fluke assumes no risk for damage in transit. Following
warranty repair, the product will be returned to Buyer, transportation prepaid
(FOB Destination). If Fluke determines that the failure was caused by
misuse, alteration, accident or abnormal condition of operation or handling,
Fluke will provide an estimate of repair costs and obtain authorization
before commencing the work. Following repair, the product will be returned
to the Buyer transportation prepaid and the Buyer will be billed for the repair
and return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSI VE REMEDY AND
IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS O R I MPLIED,
INCLUDING BUT NOT LIMI TED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
FLUKE SHALL NOT BE LIABLE F OR ANY SPECI AL , I NDI RECT,
INCIDENTAL OR CONSEQUENTI AL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF
WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE OR ANY
OTHER THEORY.

Since some countries or states do not allow limitation of the term of an
implied warranty, or exclusion or limitation of incidental or consequential
damages, the limitations and exclusions of this warranty may not apply to
every buyer. If any provision of this Warranty is held invalid or
unenforceable by a court of competent jurisdiction, such holding will not
affect the validity or enfor ceability of any othe r pr ovision.

Fluke Corporation Fluke Industrial B.V.
P.O. Box 9090 P.O. Box 680
Everett 7600 AR Almelo
WA 98206-9090 The Netherlands
USA

®

PAC 91

Print Adapter Cable

Instruction Sheet

Introduction

The PAC 91 is an optically isolated serial to parallel
converter / print adapter cable for use with Fluke test
tools that have an optical interface connector.

Specifications

Battery Type: Alkaline 9 volt, NEDA, IEC6LR61
Battery Life: 20 hour operation
Environmental Specifications:

Meet requirements of:

• MIL-T-28800E, Type III, Class 3

• EN 50081-1, Electromagnetic Compatibility

Generic Emission Standard: EN55022 and
EN60555-2

• EN 50082-1, Electromagnetic Compatibility
Generic Immunity Standard: IEC801-2, -3, -4, -5

Temperature:

Operating: 0 °C to +50 °C (32 °F to +122 °F)
Non-operating: -40 °C to +70 °C (-40 °F to +158 °F)

Parallel Output:

Connector: 25-pole, D-shell, female.
Output: 8-bit parallel
Protocol: Centronix
Signal levels: TTL compatible

Fixed Serial Interface Settings:

9600 Baud, 8 data bits, no parity, 1 stop bit
Handshake: XON / XOFF

June 1996.

© 1996 Fluke
Corporation.
All rights reserved.
Printed in The
Netherlands.
All product names are trademarks of their respective companies

Legends

OFF after
5 minutes

no data

Blinking when

Battery OK

Replacing the Battery Maintenance

Lit during

transmission

Connecting a Printer

PAC 91

Alkaline 9 volt,

NEDA,

Parallel Printer Cable

ITEM ORDERING CODE

1 5322 320 11267
2 5322 325 10162
3 5322 401 11606
4 4822 290 80346
5 4822 138 10116
6 5322 442 00162
7 5322 502 14063
8 5322 454 13031

9 5322 442 00161
10 5322 410 10319
11 5322 216 04037
12 5322 442 00163