Fluke 715 User Manual
715 V olt/mA Calibrator
Compact, lightweight, and easy to carry
+
LOOP
INPUT
OUTPUT
30V
MAX
VOLT/mA CALIBRATOR
715
V
mV
INPUT
COM
mA
30V
MAX
- mA SIMULATE, +
+ mA -
OUTPUT(30V MAX)
mA
30V
MAX
VOLTS
715 Volt/mA Calibrator
Measure loop current
•
(0-20 mA, 4-20 mA)
signals with 0.015% accuracy and
0.001mA resolution
Measure voltage output process
•
signals from PLCs, transmitters
Source or simulate 24 mA
•
loop current
Source voltage to 100 mV or 10V
•
24V loop supply with simultaneous
•
%
current measurement
General features
Compact and lightweight
•
Simple controls
•
Clear, 5-digit, liquid crystal display
•
Operating temperature:
•
-10°C to 55°C
Safety: CSA C22.2 No. 1010.1:1992
•
Three-year warranty
•
Included:
V
•
– Fluke 715 Volt/mA Calibrator
– Protective Yellow Holster with
Flex-Stand
– Test leads and alligator clips
™
General specifications
Maximum voltage: 30 volts:
Non-operating temperature:
-40°C to 60°C
Operating temperature: -10°C to 55°C
Relative humidity: 95% (10°C to 30°C);
75% (30°C to 40°C); 45% (40°C to
50°C); 35% (50°C to 55°C)
Operating altitude: 3,000m max
Shock: 1m drop test
Vibration: random, 2g, 5-500 Hz
Safety: CSA C22.2 No. 1010.1:1992
EMC: EN50082-1:1992 and
EN55022:1994 Class B
Size/weight: 187 mm L x 87 mm W x
32 mm D (7.35 in L x 3.41 in W x
1.25 in D) 330g (12 oz)
Size/weight (with holster and
FlexStand™): 201mm L x 98 mm W x
52 mm D (7.93 in L x 3.86 in W x
2.06 in D) 600g (21 oz)
Power: 9V battery ANSI/NEDA 1604A or
IEC 6LR619V alkaline
Battery Life: 4 to 20 hours, typical,
depending on functions used
Warranty: Three years
– Single 9V alkaline battery
– Instructions (14 languages)
Ordering
Information
Fluke-715 Volt/mA Calibrator
Need technical assistance? Call:
1-800-44-FLUKE
Toll-free in the U.S.
(905) 890-7600 in Canada
(425) 356-5500 other countries
For more information to be sent to you
by fax, call 1-800-FLUKE-FAX
in the U.S. and Canada. Or, visit our
Website at http://www.fluke.com
Specifications ( 18° to 28°C, one year)
Function Range Resolution Accuracy Notes
Loop supply 24 V dc N/A ±10% Drive; 20 mA into 1000Ω
for battery >6.8V; 700 Ω
for battery 5.8 to 6.8V
Measure/simulate 0 to 24 mA 0.001 mA 0.015% + 2 counts Sink (simulate transmitter)
mA/% of span (-25% to 125%) display mA or % of span
Measure/simulate 0 to 100 mV 0.01 mV 0.02% + 2 counts
mV
Measure/simulate 0 to 10 V 0.001 V 0.02% + 2 counts
V
Fluke. Keeping your world
up and running.
C0202UEN 8/98 Rev A
Loading...