Page 1
2AC is the latest product in the
VoltAlert™ ac non-contact voltage
tester family from Fluke. The 2AC
is pocket-sized and easy to use.
Just touch the tip to a terminal
strip, outlet, or cord. When the
tip glows red you know there’s
voltage in the line. Electricians,
maintenance, service and safety
personnel, as well as homeowners, can quickly test for energized
circuits and defective grounds on
the factory floor, in the shop, or
at home.
Technical Data
Features and benefits
•
NEW! Always on, using special low-power
circuitry to sustain battery life and ensure your
2AC is always ready
•
NEW! Innovative ‘Battery Check’ button
function ensures battery is in good condition*
•
Voltage detection from 90 to 1000 V ac,
suitable for a wide range of residential,
commercial and industrial needs
•
Category IV – 1000 V overvoltage rated
product for best in class user protection
•
Integrated clip design, optimized for pocket
storage
•
Powered by 2 AAA batteries (included)
•
Fluke ruggedness and reliability,
two-year warranty
*Use of Battery Check function is optional and for convenience only.
It is not intended as a substitute for checking the unit on a known live
source before and after use.
Specifications
Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.),
CAN/CSA-C22.2 No. 61010-1-04, and
ISA-82.02.01, Pollution Degree 2
EMC compliance
Meets IEC 61326-1:2006
Operating
90 V ac to 1000 V ac
Temperature
Operating: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)
Humidity
0 % to 95 % (0 °C to 30 °C, 32 °F to 86 °F),
0 % to 75 % (30 °C to 40 °C, 86 °F to 104 °F),
0 % to 45 % (40 °C to 55 °C, 86 °F to 131 °F)
Altitude
2000 m (CAT IV 1000 V)
Cleaning
Clean with damp cloth
Battery life
Typical battery life of greater than one year
Warranty period
Two-years
2AC VoltAlert
Always on for faster,
safer voltage testing
™
.
CAT IV
1000 V
Page 2
Ordering information
FLK2AC/90-1000V Non Contact Voltage Detector, 90-1000 V
FLK2AC/90-1000V5PK Non-Contact Voltage Detector, 90-1000 V, 5-Pack
Includes: Two AAA batteries, application guide, and instruction sheet
Outlet socket Electrical panel Junction box
Keeping your world
up and running.
®
2 Fluke Corporation 2AC VoltAlert™
Others in the VoltAlert Family
Features
2AC
90-1000 V ac
CAT IV 1000 V
1AC-II**
90-1000 V ac
CAT IV 1000 V
LVD2
90-600 V ac
CAT IV 600 V
n n n
n n n
n
n n
n
n
n
n
Voltage Detection
On/Off Button
Dual Sensitivity
Battery Check
Audible/Silent
Voltbeat
™
LED Flashlight
Battery Included
LVD2, with flashlight and dual sensitivity
1AC-II with beeper, on-off and self test
**Also available in 20-90 V low voltage version as 1LAC-II.
Loading...