2AC VoltAlert
Always on for faster,
safer voltage testing
™
.
Technical Data
2AC is the latest product in the
VoltAlert™ ac non-contact voltage
tester family from Fluke. The 2AC
is pocket-sized and easy to use.
Just touch the tip to a terminal
strip, outlet, or cord. When the
tip glows red you know there’s
Features and benefits
NEW! Always on, using special low-power
•
circuitry to sustain battery life and ensure your
2AC is always ready
NEW! Innovative ‘Battery Check’ button
•
function ensures battery is in good condition*
Voltage detection from 90 to 1000 V ac,
•
suitable for a wide range of residential,
commercial and industrial needs
Category IV – 1000 V overvoltage rated
•
product for best in class user protection
Integrated clip design, optimized for pocket
•
storage
Powered by 2 AAA batteries (included)
•
Fluke ruggedness and reliability,
•
two-year warranty
*Use of Battery Check function is optional and for convenience only.
It is not intended as a substitute for checking the unit on a known live
source before and after use.
voltage in the line. Electricians,
maintenance, service and safety
personnel, as well as homeowners, can quickly test for energized
circuits and defective grounds on
the factory floor, in the shop, or
at home.
CAT IV
1000 V
Specifications
Safety compliance
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.),
CAN/CSA-C22.2 No. 61010-1-04, and
ISA-82.02.01, Pollution Degree 2
EMC compliance
Meets IEC 61326-1:2006
Operating
90 V ac to 1000 V ac
Temperature
Operating: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -10 °C to 50 °C (14 °F to 122 °F)
Humidity
0 % to 95 % (0 °C to 30 °C, 32 °F to 86 °F),
0 % to 75 % (30 °C to 40 °C, 86 °F to 104 °F),
0 % to 45 % (40 °C to 55 °C, 86 °F to 131 °F)
Altitude
2000 m (CAT IV 1000 V)
Cleaning
Clean with damp cloth
Battery life
Typical battery life of greater than one year
Warranty period
Two-years
Ordering information
FLK2AC/90-1000V Non Contact Voltage Detector, 90-1000 V
FLK2AC/90-1000V5PK Non-Contact Voltage Detector, 90-1000 V, 5-Pack
Includes: Two AAA batteries, application guide, and instruction sheet
Outlet socket Electrical panel Junction box
Others in the VoltAlert Family
1AC-II with beeper, on-off and self test
LVD2, with flashlight and dual sensitivity
2 Fluke Corporation 2AC VoltAlert™
Features
2AC
90-1000 V ac
CAT IV 1000 V
1AC-II**
90-1000 V ac
CAT IV 1000 V
LVD2
90-600 V ac
CAT IV 600 V
n n n
Voltage Detection
n n n
Battery Included
n
Battery Check
n n
On/Off Button
n
Voltbeat
™
n
Audible/Silent
n
Dual Sensitivity
n
LED Flashlight
**Also available in 20-90 V low voltage version as 1LAC-II.
For more information:
www.fluke.com/voltalert
Fluke. Keeping your world
up and running.
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2010 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 8/2010 3846474A D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
®