Fluke 117 Data Sheet

Fluke 117

N10140

Electrician’s Multimeter

with Non-Contact Voltage

Compact true-rms meter for commercial applications

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Features include:

VoltAlert™ technology for non-contact voltage detection

•

AutoVolt automatic ac/dc voltage selection

•

LoZ: helps prevent false readings due to ghost voltage

•

Large white LED backlight to work in poorly lit areas

•

True-rms for accurate measurements on non-linear loads

•

Measures 10 A (20 A overload for 30 seconds)

•

Resistance, continuity, frequency and capacitance

•

Min/Max/Average to record signal fluctuations

•

Compatible with optional magnetic hanger (ToolPak™) for

•

hands free operation

CAT III 600 V safety rated

•

Technical Data

Actual size

General specifications

Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %. The accuracy specifications take the form of: ± ( [ % of reading ] + [ counts ] )

Maximum voltage between any terminal and earth ground

Surge protection 6 kV peak per IEC 61010-1 600 V

Fuse for A input 11 A, 1000 V FAST Fuse

Display Digital: 6,000 counts, updates 4/sec Bar graph 33 segments, updates 32/sec Operating temperature -10 °C to + 50 °C Storage temperature -40 °C to + 60 °C Battery 9 volt Alkaline, NEDA 1604A/

Battery life 400 hours typical, without backlight

600 V

CAT III, Pollution Degree 2

(Fluke PN 803293)

IEC 6LR61

Accuracy specifications

Measurement Range Resolution Accuracy ± ([% of reading] + [counts])

DC millivolts 600.0 mV 0.1 mV 0.5 % + 2

DC volts 6.000 V 0.001 V

0.5 % + 260.00 V 0.01 V

600.0 V 0.1 V

Auto volts 600.0 V 0.1 V 2.0 % + 3 (dc, 45 Hz to 500 Hz)

AC millivolts1 true-rms

AC volts1 true-rms 6.000 V 0.001 V

Continuity 600 Ω 1 Ω Beeper on < 20 Ω off > 250 Ω; detects

Ohms 600.0 Ω 0.1Ω 0.9 % + 2

Diode test 2.000 V 0.001 V 0.9 % + 2

Capacitance 1000 nF 1 nF

Lo-Z capacitance 1 nF to 500 µF 10 % + 2 typical

AC amps true-rms (45 Hz to 500 Hz)

DC amps 6.000 A 0.001 A

Hz (V or A input)299.99 Hz 0.01 Hz

Notes:

All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display nonzero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.

Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.

2 Fluke Corporation 117 Electrician’s Multimeter with Non-Contact Voltage

600.0 mV 0.1 mV 1.0 % + 3 (dc, 45 Hz to 500 Hz)

60.00 V 0.01 V

600.0 V 0.1 V

Ω 0.001 kΩ

6.000 k

Ω 0.01 kΩ

60.00 k

Ω 0.1 kΩ

600.0 k

Ω 0.001 MΩ

6.000 M

Ω 0.01 MΩ 1.5 % + 2

40.00 M

100.0 µF 0.1 µF

9999 µF 1 µF

100 µF to 1000 µF 1.9 % + 2

> 1000 µF 5 % + 20

6.000 A 0.001 A

10.00 A 0.01 A

20 A overload for 30 seconds max.

10.00 A 0.01 A

20 A overload for 30 seconds max.

999.9 Hz 0.1 Hz

9.999 kHz 0.001 kHz

50.00 kHz 0.01 kHz

4.0 % + 3 (500 Hz to 1 kHz)

2.0 % + 3 (500 Hz to 1 kHz)

1.0 % + 3 (45 Hz to 500 Hz)

2.0 % + 3 (500 Hz to 1 kHz)

opens or shorts of 500 µs or longer.

0.9 % + 1

1.9 % + 210.00 µF 0.01 µF

1.5 % + 3

1.0 % + 3

0.1 % + 2

Ordering information

Fluke-117 Electrician’s

Multimeter with Non-Contact Voltage

Included

TL75 Test leads, holster, User’s manual and 9 V battery (installed).

Fluke. Keeping your world up and running.™

Fluke Corporation PO Box 9090, Everett, WA USA 98206

Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands

For more information call:

≤ 3

In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 2 675 200 or Fax (31 40) 2 675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com