Flowline LI40 Specifications
®
®
PodView
Level Indicator
LI40
Application
Compatible with any EchoPod® sensor, the general
purpose level indicator displays the measured value,
applicable relay status and set point configuration
of the attached sensor, as the sensor was configured
to operate by WebCal software. PodView requires no
programming, and receives both power and data from
the connected sensor. Through the indicator, users can
adjust EchoPod relay set points in the field. PodView
is installed up to 15’ (4.5m) away from the sensor in a
panel or NEMA enclosure.
I
P
65
Features
Field mount indicator for use with EchoPod sensors
Indicates level or volume and EchoPod relay status
Enables EchoPod relay set point changes in the field
Powered directly by the attached EchoPod sensor
Repeats EchoPod sensor data with no programming
Corrosion resistant enclosure with NEMA 4 faceplate
Compatible Products
DL14 DL24
ECHOPOD®
Multi-Function
Ultrasonic Level
Transmitter
Compatibility
EchoPod sensors operating
on V50 firmware or higher
V50 firmware is available via
WebCal® 6 software or higher
Maximum distance between
PodView & EchoPod is 4.5m (15’)
ECHOPOD®
Multi-Function
Ultrasonic Level
Transmitter
DL10
ECHOPOD®
Ultrasonic Level
Transmitter
© 2016 Flowline | 10500 Humbolt Street, Los Alamitos, CA 90720 USA p 562.598.3015 f 562.431.8507 w flowline.com DS204260 REV C
PodView
coarse
Level Indicator
®
®
LI40
Specifications
Display type:
Display units:
Display output:
Character height:
Decimal point:
Dot indication:
User interface:
Sensor input:
Supply voltage:
Operating temp.:
Cable type:
Cable length:
Cable jack. mat.:
Enclosure rating:
Enclosure mat’l:
Enclosure type:
Button material:
Classification:
Compliance:
LCD, 6-digit with 4 relay
indicators
Engineering
-99999 to 999999
0.374” (9.5mm)
Fixed
Relay status
Three button
(1) EchoPod® sensor
Provided by EchoPod
F: -4° to 140°
C: -20° to 60°
4-conductor, #22 AWG
6’ (1.8m)
Polyurethane
NEMA 4 (IP65) faceplate
Polycarbonate
Panel mount
Silicon rubber
General purpose
CE
Dimensions
SELECT
3.37"
(85.5 mm)
3/4
thread
3.10"
(78.6 mm)
0.67"
(17.0 mm)
Configuration
LI99-1001
Sensors and PodView indirectly, are configurable via our free
WebCal PC software and one Fob USB adapter. Sensors are
offered with and without Fobs. Fobs are universal and can be
used to configure any WebCal compatible product. Download
your free copy of WebCal in English or Chinese.
Ordering
LI40-1001
(1)
NOTES
PodView is compatible with EchoPod sensors configured with WebCal
1)
6 software and updated to V50 firmware or higher using one LI99-1001
USB fob adapter. WebCal is a free download from our website.
© 2016 Flowline | 10500 Humbolt Street, Los Alamitos, CA 90720 USA p 562.598.3015 f 562.431.8507 w flowline.com DS204260 REV C
Loading...