Page 1
The
Heavyweight
Champ
AvAilAble up to 12” size!
Our 80DI check valves
can take the pressure.
It’s big enough to support the weight
of large submersible pump at deep
depths for irrigation and industrial
applications. The 80DI has a
thread for guiding pipes when inserting.
You also have these pluses in your
corner:
n Low Headloss
n Minimum Water Hammer
n Buna “N” Rubber Disc
n Rated up to 600 PSI
n Stemless Ductile Iron Follower
n Stainless Steel Spring with
anti-spin feature
n Extra-Thick Walls
n Optional break-off plug enabling you to drain the riser pipe
before pulling the pump
1
⁄2” lead-in
It’s another winner from Flomatic…Call for complete information
at 800-833-2040 or visit us on the web at www.flomatic.com
High Quality Valves Built To Last…
Page 2
Knocking Out
the Competition
Our 80DI check valves
can take the pressure.
It’s big enough to support the weight
of large submersible pump at deep
depths for irrigation and industrial
applications. The 80DI has a
thread for guiding pipes when inserting.
You also have these pluses in your
corner:
n Low Headloss
n Minimum Water Hammer
n Buna “N” Rubber Disc
n Rated up to 600 PSI
n Stemless Ductile Iron Follower
n Stainless Steel Spring with
anti-spin feature
n Extra-Thick Walls
n Optional break-off plug enabling you to drain the riser pipe
before pulling the pump
1
⁄2” lead-in
It’s another winner from Flomatic…Call for complete information
at 800-833-2040 or visit us on the web at www.flomatic.com
High Quality Valves Built To Last…
Loading...