FLIR EM54 USER MANUAL Document Identifier: EM54-en-US_AA
Table of Contents
1. ADVISORIES 3
1.1 Copyright 3
1.2 Quality Assurance 3
1.3 Documentation 3
1.4 Disposal of Electronic Waste 3
2. INTRODUCTION 4
3. METER DESCRIPTION 5
3.1 Front and Side Descriptions 5
3.2 Control Button Descriptions 6
3.3 LCD Description 7
4. OPERATION 9
4.1 Powering the Meter 9
4.2 Air Temperature and Relative Humidity Measurements 9
4.3 Wet Bulb and Dew Point Temperature Calculations 9
4.4 Type-K Thermocouple Measurements 9
4.5 Air Velocity Measurements 10
4.6 Airflow (Volume) Measurements 10
4.7 LCD Backlight 11
4.8 Data Hold 11
4.9 MAX-MIN-AVG Record Mode 11
4.10 Setup Mode 11
5. MAINTENANCE 12
5.1 Cleaning and Storage 12
5.2 Battery Replacement 12
5.3 Disposal of Electronic Waste 12
6. SPECIFICATIONS 13
6.1 General specifications 13
6.2 Measurement specifications 13
7. CUSTOMER SUPPORT 14
8. THREE-YEAR LIMITED WARRANTY 14
FLIR EM54 USER MANUAL Document Identifier: EM54-en-US_AA
1. Advisories
1.1 Copyright
© 2019, FLIR Systems, Inc. All rights reserved worldwide. No parts of the software
including source code may be reproduced, transmitted, transcribed or translated into
any language or computer language in any form or by any means, electronic, magnetic,
optical, manual or otherwise, without the prior written permission of FLIR Systems.
The documentation must not, in whole or part, be copied, photocopied, reproduced,
translated or transmitted to any electronic medium or machine-readable form without
prior consent, in writing, from FLIR Systems. Names and marks appearing on the
products herein are either registered trademarks or trademarks of FLIR Systems and/or
its subsidiaries. All other trademarks, trade names or company names referenced herein
are used for identification only and are the property of their respective owners.
1.2 Quality Assurance
The Quality Management System under which these products are developed and
manufactured has been certified in accordance with the ISO 9001 standard.
FLIR Systems is committed to a policy of continuous development; therefore, we reserve
the right to make changes and improvements on any of the products without prior
notice.
1.3 Documentation
To access the latest manuals and notifications, go to the Download tab at:
https://support.flir.com. It only takes a few minutes to register online. In the download
area you will also find the latest releases of manuals for our other products, as well as
manuals for our historical and obsolete products.
1.4 Disposal of Electronic Waste
As with most electronic products, this equipment must be disposed of in an
environmentally friendly way, and in accordance with existing regulations for
electronic waste. Please contact your FLIR Systems representative for more
details.
FLIR EM54 USER MANUAL Document Identifier: EM54-en-US_AA
2. Introduction
Thank you for selecting the FLIR EM54 Environmental Meter. The EM54 measures Air
Temperature, Type-K Temperature, Relative Humidity, and Air Velocity and calculates
Dew Point/Wet Bulb Temperature and Airflow (volume). Visit
www.flir.com/testwarranty to read the 3-Year Limited Warranty document and to
register your product to receive a free 1-year warranty extension.
Features
• Dual reading, backlit multi-function display
• Measures air temperature and relative humidity via built-in temperature and
relative humidity sensors
• Measures air velocity and Type-K temperature using remote probes
• Side compartment with micro USB port for vane anemometer connection and sub-
miniature jack for Type-K thermocouple probe connection
• Calculates Wet Bulb and Dew Point temperature
• Calculates airflow (CFM/CMM air volume) in air ducts using an air velocity
measurement and a user-programmed air duct area value
• Selectable units of measure
• MIN-MAX-AVG recording
• Programmable Auto Power OFF (APO) timer
• Low battery indication
• Setup mode for changing default settings and for entering area measurements for
airflow measurements
FLIR EM54 USER MANUAL Document Identifier: EM54-en-US_AA
3. Meter Description
3.1 Front and Side Descriptions
1. Temperature and Relative Humidity sensors
2. Backlit LCD (see separate section)
3. Control buttons (see separate section)
4. Type-K thermocouple sub-miniature jack
5. Vane Anemometer USB probe jack
Note: Accessory mount and battery compartment on back of meter