FLIR Exx series, E40, E50, E60 User Manual
User’s manual
FLIR Exx series
User’s manual
FLIR Exx series
#T559845; r. AJ/37554/37554; en-US
iii
Table of contents
1 Disclaimers ............ .. .. .. ................................. .. .. .. ............................. 1
1.1 Legal disclaimer ....................................................................... 1
1.2 Usage statistics ........................................................................1
1.3 Changes to registry ................................................................... 1
1.4 U.S. Government Regulations...................................................... 1
1.5 Copyright ................................................................................1
1.6 Quality assurance .....................................................................1
1.7 Patents...................................................................................1
1.8 EULA Terms ............................................................................1
1.9 EULA Terms ............................................................................1
2 Safety information .......... .. .. .. ................................. .. .. .. ......................3
3 Notice to user ......... .. .. .. ................................. .. .. .. ............................. 7
3.1 User-to-user forums .................................................................. 7
3.2 Calibration...............................................................................7
3.3 Accuracy ................................................................................ 7
3.4 Disposal of electronic waste........................................................ 7
3.5 Training .................................................................................. 7
3.6 Documentation updates ............................................................. 7
3.7 Important note about this manual.................................................. 7
3.8 Note about authoritative versions..................................................7
4 Customer help .............. .. .. .. ............................... .. .. .. ......................... 8
4.1 General ..................................................................................8
4.2 Submitting a question ................................................................8
4.3 Downloads ..............................................................................9
5 Quick Start Guide ................. .. .. ................................. .. .. .. ................ 10
5.1 Procedure ............................................................................. 10
6 List of accessories and services .. .. .. ................................. .. .. .. .......... 11
7 Camera parts ............................... .. .. .. ................................. .. .. .. ...... 13
7.1 View from the right .................................................................. 13
7.1.1 Figure........................................................................ 13
7.1.2 Explanation................................................................. 13
7.2 View from the left .................................................................... 14
7.2.1 Figure........................................................................ 14
7.2.2 Explanation................................................................. 14
7.3 LCD and keypad..................................................................... 15
7.3.1 Figure........................................................................ 15
7.3.2 Explanation................................................................. 15
7.4 View from the bottom............................................................... 16
7.4.1 Figure........................................................................ 16
7.4.2 Explanation................................................................. 16
7.5 Battery condition LED indicator.................................................. 17
7.5.1 Figure........................................................................ 17
7.5.2 Explanation................................................................. 17
7.6 Laser pointer ......................................................................... 18
7.6.1 Figure........................................................................ 18
7.6.2 Laser warning label....................................................... 18
7.6.3 Laser rules and regulations ............................................ 18
8 Screen elements .... .. .. .. ................................. .. .. .............................. 19
8.1 Figure .................................................................................. 19
8.2 Explanation ........................................................................... 19
9 Navigating the menu system... .. .. .. ................................. .. .. .. ............. 20
9.1 Figure .................................................................................. 20
9.2 Explanation ........................................................................... 20
#T559845; r. AJ/37554/37554; en-US
v
Table of contents
10 Connecting external devices and storage media . .. .............................. 21
10.1 Figure .................................................................................. 21
10.2 Explanation ........................................................................... 21
10.3 Figure .................................................................................. 22
10.4 Explanation ........................................................................... 22
11 Pairing Bluetooth devices.................. .. .. .. ................................. .. .. .. .. 23
11.1 General ................................................................................ 23
11.2 Procedure ............................................................................. 23
12 Configuring Wi-Fi .................. .. .. .. ................................. .. .. .. ............. 24
12.1 General ................................................................................ 24
12.2 Setting up a peer-to-peer connection (most common use) ............... 24
12.3 Connecting the camera to a wireless local area network (less
common use)......................................................................... 24
13 Handling the camera ... .. .. .. ................................. .. .. .. ........................ 25
13.1 Charging the battery................................................................ 25
13.1.1 Using the power supply to charge the battery ..................... 25
13.1.2 Using the stand-alone battery charger to charge the
battery ....................................................................... 25
13.2 Turning on and turning off the camera.......................................... 25
13.3 Adjusting the infrared camera focus ............................................ 26
13.3.1 Figure........................................................................ 26
13.3.2 Procedure .................................................................. 26
13.4 Operating the laser pointer........................................................ 27
13.4.1 Figure........................................................................ 27
13.4.2 Procedure .................................................................. 27
13.5 Removing the battery............................................................... 27
13.6 Mounting an accessory lens ...................................................... 28
13.7 Calibrating the touchscreen....................................................... 29
13.7.1 Figure........................................................................ 29
13.7.2 Procedure .................................................................. 29
13.8 Using the camera lamp ............................................................ 29
13.8.1 General...................................................................... 29
13.8.2 Procedure .................................................................. 30
14 Working with images............. .. .. ................................. .. .. .. ................ 31
14.1 Saving an image ..................................................................... 31
14.1.1 General...................................................................... 31
14.1.2 Image capacity ............................................................ 31
14.1.3 Naming convention....................................................... 31
14.1.4 Procedure .................................................................. 31
14.2 Previewing an image ............................................................... 31
14.2.1 General...................................................................... 31
14.2.2 Procedure .................................................................. 31
14.3 Opening a saved image............................................................ 32
14.3.1 General...................................................................... 32
14.3.2 Procedure .................................................................. 32
14.4 Editing a saved image.............................................................. 32
14.4.1 General...................................................................... 32
14.4.2 Procedure .................................................................. 32
14.5 Adjusting an infrared image....................................................... 32
14.5.1 General...................................................................... 32
14.5.2 Example 1 .................................................................. 33
14.5.3 Example 2 .................................................................. 33
14.5.4 Manual adjustment in Level / span mode ........................... 33
14.5.5 Manual adjustment in Level / max / min mode ..................... 34
14.6 Performing a non-uniformity correction (NUC) ............................... 34
#T559845; r. AJ/37554/37554; en-US
vi
Table of contents
14.6.1 What is a non-uniformity correction?................................. 34
14.6.2 When to perform a non-uniformity correction? .................... 34
14.6.3 Procedure .................................................................. 34
14.7 Changing the temperature range ................................................ 34
14.7.1 General...................................................................... 34
14.7.2 Procedure .................................................................. 34
14.8 Changing the color palette ........................................................ 35
14.8.1 General...................................................................... 35
14.8.2 Procedure .................................................................. 35
14.9 Zooming in on an image ........................................................... 35
14.9.1 General...................................................................... 35
14.9.2 Procedure .................................................................. 35
14.10 Deleting an image................................................................... 35
14.10.1 Procedure .................................................................. 35
14.11 Deleting all images.................................................................. 36
14.11.1 Procedure .................................................................. 36
15 Working with image modes ............................. .. .. .............................. 37
15.1 General ................................................................................ 37
15.2 Types of image modes ............................................................. 37
15.3 Procedure ............................................................................. 38
16 Working with measurement tools .. .. .. ................................. .. .. .. ......... 39
16.1 Laying out measurement tools in live mode................................... 39
16.1.1 General...................................................................... 39
16.1.2 Procedure .................................................................. 39
16.2 Laying out measurement tools in edit mode .................................. 39
16.2.1 General...................................................................... 39
16.2.2 Procedure .................................................................. 39
16.3 Moving and resizing measurement tools ...................................... 40
16.3.1 General...................................................................... 40
16.3.2 Procedure .................................................................. 40
16.4 Displaying maximum, minimum, and average values....................... 40
16.4.1 General...................................................................... 40
16.4.2 Procedure .................................................................. 40
16.5 Setting local measurement parameters for a measurement
tool ...................................................................................... 41
16.5.1 General...................................................................... 41
16.5.2 Procedure .................................................................. 41
17 Working with alarms ... .. .. .. ................................. .. .. .. ........................ 42
17.1 Working with color alarms ......................................................... 42
17.1.1 General...................................................................... 42
17.1.2 Procedure .................................................................. 42
17.2 Working with insulation alarms ................................................... 42
17.2.1 General...................................................................... 42
17.2.2 Procedure .................................................................. 42
17.3 Working with condensation alarms.............................................. 43
17.3.1 General...................................................................... 43
17.3.2 Procedure .................................................................. 43
18 Fetching data from external FLIR meters .................. .. ........................ 44
18.1 General ................................................................................ 44
18.2 Supported meters ................................................................... 44
18.3 Technical support for external meters .......................................... 44
18.4 Procedure ............................................................................. 44
18.5 Typical moisture measurement and documentation
procedure ............................................................................. 44
18.5.1 General...................................................................... 44
#T559845; r. AJ/37554/37554; en-US
vii
Table of contents
18.5.2 Procedure .................................................................. 44
19 Annotating images ........ .. .. .. ............................... .. .. .. ....................... 45
19.1 General ................................................................................ 45
19.2 Adding a note ........................................................................ 45
19.2.1 General...................................................................... 45
19.2.2 Procedure .................................................................. 45
19.3 Adding a table ........................................................................ 45
19.3.1 General...................................................................... 45
19.3.2 Procedure .................................................................. 46
19.4 Adding a voice annotation......................................................... 46
19.4.1 General...................................................................... 46
19.4.2 Procedure .................................................................. 46
20 Recording video clips ............ .. .. .. ................................. .. .. .. ............. 47
20.1 General ................................................................................ 47
20.2 Procedure: Recording a video clip .............................................. 47
20.3 Procedure: Playing a video clip .................................................. 47
21 Screening alarm . ................................. .. .. .. ................................. .. .. . 48
21.1 General ................................................................................ 48
21.2 Procedure ............................................................................. 48
22 Changing settings . .. .. ................................. .. .. .. ............................... 49
22.1 General ................................................................................ 49
22.2 Procedure ............................................................................. 49
22.3 Description of the various settings .............................................. 49
22.3.1 Measurement parameters .............................................. 49
22.3.2 Save options ............................................................... 50
22.3.3 Add-on lens ................................................................ 50
22.3.4 Device settings............................................................ 50
23 Technical data ......... .. .. .. ................................. .. .. .. ........................... 52
23.1 Online field-of-view calculator .................................................... 52
23.2 Note about technical data ......................................................... 52
23.3 Note about authoritative versions................................................ 52
23.4 FLIR E33 .............................................................................. 53
23.5 FLIR E40 .............................................................................. 58
23.6 FLIR E40 (incl. Wi-Fi)............................................................... 63
23.7 FLIR E40 with SC kit (incl. Wi-Fi and 45° lens)............................... 68
23.8 FLIR E40 with SC kit (incl. Wi-Fi)................................................ 73
23.9 FLIR E40bx (incl. Wi-Fi) ........................................................... 78
23.10 FLIR E50 .............................................................................. 83
23.11 FLIR E50 (incl. Wi-Fi)............................................................... 88
23.12 FLIR E50bx (incl. Wi-Fi) ........................................................... 93
23.13 FLIR E60 .............................................................................. 98
23.14 FLIR E60 (incl. Wi-Fi)............................................................. 103
23.15 FLIR E60 with Educational kit (DE) ........................................... 108
23.16 FLIR E60 with Educational kit (EN) ........................................... 109
23.17 FLIR E60 with Educational kit (ES)............................................ 110
23.18 FLIR E60 with Educational kit (FR)............................................ 111
23.19 FLIR E60 with Educational kit (IT) ............................................. 112
23.20 FLIR E60 with Educational kit (JA) ............................................ 113
23.21 FLIR E60 with Educational kit (KO) ........................................... 114
23.22 FLIR E60bx (incl. Wi-Fi) ......................................................... 115
23.23 FLIR E63 (incl. Wi-Fi)............................................................. 120
#T559845; r. AJ/37554/37554; en-US
viii
Table of contents
24 Mechanical drawings .. .. .. .. ................................. .. .. .. ...................... 125
25 CE Declaration of conformity ............ .. .. .. ................................. .. .. ... 130
26 Cleaning the camera.......... .. .. .. ................................. .. .. .. ............... 132
26.1 Camera housing, cables, and other items................................... 132
26.1.1 Liquids..................................................................... 132
26.1.2 Equipment................................................................ 132
26.1.3 Procedure ................................................................ 132
26.2 Infrared lens ........................................................................ 132
26.2.1 Liquids..................................................................... 132
26.2.2 Equipment................................................................ 132
26.2.3 Procedure ................................................................ 132
27 Application examples.. .. ................................. .. .. ............................ 133
27.1 Moisture & water damage ....................................................... 133
27.1.1 General.................................................................... 133
27.1.2 Figure...................................................................... 133
27.2 Faulty contact in socket .......................................................... 133
27.2.1 General.................................................................... 133
27.2.2 Figure...................................................................... 133
27.3 Oxidized socket.................................................................... 134
27.3.1 General.................................................................... 134
27.3.2 Figure...................................................................... 134
27.4 Insulation deficiencies............................................................ 135
27.4.1 General.................................................................... 135
27.4.2 Figure...................................................................... 135
27.5 Draft .................................................................................. 135
27.5.1 General.................................................................... 135
27.5.2 Figure...................................................................... 135
28 About FLIR Systems .................. .. .. .. ................................. .. .. .. ....... 137
28.1 More than just an infrared camera ............................................ 138
28.2 Sharing our knowledge .......................................................... 138
28.3 Supporting our customers....................................................... 138
29 Glossary .... ..................................... .. ..................................... .. .... 140
30 Thermographic measurement techniques .............................. .. .. .. .... 143
30.1 Introduction ........................................................................ 143
30.2 Emissivity............................................................................ 143
30.2.1 Finding the emissivity of a sample .................................. 143
30.3 Reflected apparent temperature ............................................... 146
30.4 Distance ............................................................................. 147
30.5 Relative humidity .................................................................. 147
30.6 Other parameters.................................................................. 147
31 History of infrared technology................................. .. .. .. .................. 148
32 Theory of thermography ................................. .. .. ............................ 151
32.1 Introduction ......................................................................... 151
32.2 The electromagnetic spectrum................................................. 151
32.3 Blackbody radiation............................................................... 151
32.3.1 Planck’s law .............................................................. 152
32.3.2 Wien’s displacement law.............................................. 153
32.3.3 Stefan-Boltzmann's law ............................................... 154
32.3.4 Non-blackbody emitters............................................... 155
32.4 Infrared semi-transparent materials........................................... 157
33 The measurement formula....................... .. .. .. ............................... .. 158
34 Emissivity tables .. .. ................................. .. .. .. ................................ 162
34.1 References.......................................................................... 162
34.2 Tables ................................................................................ 162
#T559845; r. AJ/37554/37554; en-US
ix
Disclaimers
1
1.1 Legal disclaimer
All products manufactured by FLIR Systems are warranted against defective
materials and workmanship for a period of one (1) year from the delivery date
of the original purchase, provided such products have been under normal
storage, use and service, and in accordance with FLIR Systems instruction.
Uncooled handheld infrared cameras manufactured by FLIR Systemsare
warranted against defective materials andworkmanship for a period of two
(2) years from the delivery date of theoriginal purchase, provided such products have been under normalstorage, use and service, and in accordance
with FLIR Systems instruction, and provided that thecamera has been registered within 60 days of original purchase.
Detectors for uncooled handheld infrared cameras manufactured byFLIR
Systems are warranted against defective materials and workmanship for a
period of ten (10) years from the deliverydate of the original purchase, provided such products have been under normal storage,use and service, and
in accordance with FLIR Systems instruction, and providedthat the camera
has been registered within 60 days of original purchase.
Products which are not manufactured by FLIR Systems but included in systems delivered by FLIR Systems to the originalpurchaser, carry the warranty,
if any, of the particular supplieronly. FLIR Systems has no responsibility
whatsoever for such products.
The warranty extends only to the original purchaser andis not transferable. It
is not applicable to any product which has been subjected to misuse, neglect,
accident or abnormal conditions of operation. Expendable partsare excluded
from the warranty.
In the case of a defect in aproduct covered by this warranty the product must
not be further used in order to prevent additional damage. The purchaser
shall promptly report any defect to FLIR Systemsor thiswarranty will not
apply.
FLIR Systems will, at its option, repair orreplace any such defective product
free of charge if, upon inspection, it proves to bedefective in materialor workmanship and provided that it is returned toFLIR Systemswithin the said oneyear period.
FLIR Systems has no other obligation or liabilityfor defects than those set
forth above.
No other warranty is expressed or implied. FLIR Systems specifically disclaims the implied warranties of merchantability and fitness for a particular
purpose.
FLIR Systems shall not be liable for any direct, indirect, special, incidental or
consequential loss or damage, whether based on contract,tort orany other
legal theory.
This warranty shall be governed by Swedish law.
Any dispute, controversy or claim arisingout ofor in connection with this war-
ranty, shall be finally settled by arbitration in accordance with the Rules of the
Arbitration Institute of the StockholmChamber of Commerce. The place of arbitration shall be Stockholm. The language to be used in thearbitral proceedings shall be English.
1.2 Usage statistics
FLIR Systems reserves the right to gather anonymous usage statistics to help
maintain and improve the quality of our software and services.
1.3 Changes to registry
The registry entry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Control\Lsa\LmCompatibilityLevel will be automatically changed to level 2 if
the FLIR Camera Monitor service detects a FLIR camera connected to the
computer with a USB cable. The modification will only be executed if the
camera device implements a remote network service thatsupports network
logons.
1.4 U.S. Government Regulations
This product may be subject to U.S. Export Regulations.Please send any inquiries to exportquestions@flir.com.
1.5 Copyright
© 2016, FLIR Systems, Inc. All rights reservedworldwide. No parts of the
software including source code may be reproduced, transmitted, transcribed
or translated into anylanguage or computer language in any form or by any
means, electronic, magnetic, optical, manualor otherwise,without the prior
written permission of FLIR Systems.
The documentation must not, in whole or part, be copied, photocopied,reproduced, translated or transmittedto any electronic medium or machine
readable form without prior consent, in writing, from FLIR Systems.
Names and marks appearing on the products herein are either registered
trademarks or trademarks ofFLIR Systems and/or its subsidiaries. Allother
trademarks, trade names or company names referenced herein are used for
identification only and are the property of theirrespective owners.
1.6 Quality assurance
The Quality Management System under which these products are developed
and manufactured has been certified in accordance with the ISO 9001
standard.
FLIR Systems is committed to a policy of continuous development; therefore
we reserve the right to make changes andimprovements on any of the products without prior notice.
1.7 Patents
One or several of thefollowing patents and/or design patents may apply to
the products and/or features. Additional pending patents and/orpending design patents may also apply.
000279476-0001; 000439161; 000499579-0001; 000653423; 000726344;
000859020; 001106306-0001; 001707738; 001707746; 001707787;
001776519; 001954074; 002021543; 002058180; 002249953; 002531178;
0600574-8; 1144833; 1182246; 1182620; 1285345; 1299699; 1325808;
1336775; 1391114; 1402918; 1404291; 1411581; 1415075; 1421497;
1458284; 1678485; 1732314; 2106017; 2107799; 2381417; 3006596;
3006597; 466540; 483782; 484155; 4889913; 5177595; 60122153.2;
602004011681.5-08; 6707044; 68657; 7034300; 7110035; 7154093;
7157705; 7237946; 7312822; 7332716; 7336823; 7544944; 7667198;
7809258 B2; 7826736; 8,153,971; 8,823,803; 8,853,631; 8018649 B2;
8212210 B2; 8289372; 8354639 B2; 8384783; 8520970; 8565547; 8595689;
8599262; 8654239; 8680468; 8803093; D540838; D549758; D579475;
D584755; D599,392; D615,113; D664,580; D664,581; D665,004; D665,440;
D677298; D710,424 S; D718801; DI6702302-9; DI6903617-9; DI7002221-6;
DI7002891-5; DI7002892-3; DI7005799-0; DM/057692; DM/061609; EP
2115696 B1; EP2315433; SE 0700240-5; US 8340414 B2; ZL
201330267619.5; ZL01823221.3; ZL01823226.4; ZL02331553.9;
ZL02331554.7; ZL200480034894.0; ZL200530120994.2;
ZL200610088759.5; ZL200630130114.4; ZL200730151141.4;
ZL200730339504.7; ZL200820105768.8; ZL200830128581.2;
ZL200880105236.4; ZL200880105769.2; ZL200930190061.9;
ZL201030176127.1; ZL201030176130.3; ZL201030176157.2;
ZL201030595931.3; ZL201130442354.9; ZL201230471744.3;
ZL201230620731.8.
1.8 EULA Terms
• Youhave acquired a device (“INFRARED CAMERA”) that includes software licensed by FLIR SystemsAB from Microsoft Licensing, GP or its
affiliates (“MS”). Those installed software products of MSorigin, as well
as associated media, printed materials, and “online” orelectronic documentation (“SOFTWARE”) are protected by international intellectual
property laws and treaties. The SOFTWARE is licensed, notsold. All
rights reserved.
• IF YOU DO NOT AGREE TO THIS END USERLICENSE AGREEMENT
(“EULA”), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT FLIR Systems AB FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND.
ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO
USE ON THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO
THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
• GRANT OF SOFTWARE LICENSE. This EULAgrants youthe following
license:
◦ Youmay use the SOFTWARE only on theDEVICE.
◦ NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOL-
ERANT.FLIR SystemsAB HAS INDEPENDENTLYDETERMINED
HOW TO USE THE SOFTWARE IN THEDEVICE, AND MS HAS
RELIED UPON FLIR Systems AB TO CONDUCT SUFFICIENT
TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE
FOR SUCH USE.
◦ NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is
provided “AS IS” and with allfaults. THE ENTIRE RISK AS TO
SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND
EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU.
ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE
WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST
INFRINGEMENT.IF YOU HAVE RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING
ON, MS.
◦ No Liability for Certain Damages. EXCEPT AS PROHIBITED BY
LAW,MS SHALLHAVE NO LIABILITY FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR INCIDENTALDAMAGES
ARISING FROM OR IN CONNECTION WITH THE USEOR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL
APPLYEVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLEFOR ANY
AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.00).
◦ Limitations on Reverse Engineering, Decompilation, and Dis-
assembly. You may not reverse engineer, decompile, or disas-
semble the SOFTWARE, except and onlyto the extent that such
activity is expressly permitted byapplicable law notwithstanding
this limitation.
◦ SOFTWARE TRANSFER ALLOWED BUT WITH RESTRIC-
TIONS. You may permanently transfer rights under this EULA only
as part of a permanent sale or transfer of the Device, and only if
the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must alsoinclude allprior versionsof the
SOFTWARE.
◦ EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is
subject to U.S. export jurisdiction. You agree to comply with allapplicable international and national laws that apply tothe SOFTWARE, including the U.S. Export AdministrationRegulations, as
well as end-user, end-use and destination restrictions issued by U.
S. and other governments. For additional information see http://
www.microsoft.com/exporting/.
1.9 EULA Terms
Qt4 Core and Qt4 GUI, Copyright ©2013 NokiaCorporation and FLIR Systems AB. This Qt library is a free software; you can redistributeit and/ormodify it under the terms of the GNU Lesser General PublicLicense as published
by the Free Software Foundation; either version 2.1 of the License, or (atyour
option) any later version. This library is distributed in the hope that it willbe
useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITYor FITNESS FOR APARTICULAR PURPOSE. See the
GNU Lesser General Public License, http://www.gnu.org/licenses/lgpl-2.1.
#T559845; r. AJ/37554/37554; en-US
1
Disclaimers1
html. The source code for the libraries Qt4 Core and Qt4GUI may be requested from FLIR Systems AB.
#T559845; r. AJ/37554/37554; en-US
2
Safety information
2
WARNING
Applicability: Class B digital devices.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
Applicability: Digital devices subject to 15.19/RSS-210.
NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired
operation.
WARNING
Applicability: Digital devices subject to 15.21.
NOTICE: Changes or modifications made to this equipment not expressly approved by FLIR Systems
may void the FCC authorization to operate this equipment.
WARNING
Applicability: Digital devices subject to 2.1091/2.1093/OET Bulletin 65.
Radiofrequency radiation exposure Information: The radiated output power of the device is below
the FCC/IC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized.
WARNING
Applicability: Cameras with one or more laser pointers.
Do not look directly into the laser beam. The laser beam can cause eye irritation.
WARNING
Applicability: Cameras with one or more batteries.
Do not disassemble or do a modification to the battery. The battery contains safety and protection devices which, if damage occurs, can cause the battery to become hot, or cause an explosion or an ignition.
WARNING
Applicability: Cameras with one or more batteries.
If there is a leak from the battery and you get the fluid in your eyes, do not rub your eyes. Flush well with
water and immediately get medical care. The battery fluid can cause injury to your eyes if you do not do
this.
#T559845; r. AJ/37554/37554; en-US
3
Safety information
2
WARNING
Applicability: Cameras with one or more batteries.
Do not continue to charge the battery if it does not become charged in the specified charging time. If
you continue to charge the battery, it can become hot and cause an explosion or ignition. Injury to persons can occur.
WARNING
Applicability: Cameras with one or more batteries.
Only use the correct equipment to remove the electrical power from the battery. If you do not use the
correct equipment, you can decrease the performance or the life cycle of the battery. If you do not use
the correct equipment, an incorrect flow of current to the battery can occur. This can cause the battery
to become hot, or cause an explosion. Injury to persons can occur.
WARNING
Make sure that you read all applicable MSDS (Material Safety Data Sheets) and warning labels on containers before you use a liquid. The liquids can be dangerous. Injury to persons can occur.
CAUTION
Do not point the infrared camera (with or without the lens cover) at strong energy sources, for example,
devices that cause laser radiation, or the sun. This can have an unwanted effect on the accuracy of the
camera. It can also cause damage to the detector in the camera.
CAUTION
Do not use the camera in temperatures more than +50°C (+122°F), unless other information is specified
in the user documentation or technical data. High temperatures can cause damage to the camera.
CAUTION
Applicability: Cameras with one or more laser pointers.
To prevent damage, put the protective cap on the laser pointer when you do not operate the laser
pointer. Damage to the laser pointer can occur if you do not do this.
CAUTION
Applicability: Cameras with one or more batteries.
Do not attach the batteries directly to a car’s cigarette lighter socket, unless FLIR Systems supplies a
specific adapter to connect the batteries to a cigarette lighter socket. Damage to the batteries can
occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not connect the positive terminal and the negative terminal of the battery to each other with a metal
object (such as wire). Damage to the batteries can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not get water or salt water on the battery, or permit the battery to become wet. Damage to the batteries can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not make holes in the battery with objects. Damage to the battery can occur.
#T559845; r. AJ/37554/37554; en-US
4
Safety information
2
CAUTION
Applicability: Cameras with one or more batteries.
Do not hit the battery with a hammer. Damage to the battery can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not put your foot on the battery, hit it or cause shocks to it. Damage to the battery can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not put the batteries in or near a fire, or into direct sunlight. When the battery becomes hot, the builtin safety equipment becomes energized and can stop the battery charging procedure. If the battery becomes hot, damage can occur to the safety equipment and this can cause more heat, damage or ignition of the battery.
CAUTION
Applicability: Cameras with one or more batteries.
Do not put the battery on a fire or increase the temperature of the battery with heat. Damage to the battery and injury to persons can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not put the battery on or near fires, stoves, or other high-temperature locations. Damage to the battery and injury to persons can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not solder directly onto the battery. Damage to the battery can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Do not use the battery if, when you use, charge, or put the battery in storage, there is an unusual smell
from the battery, the battery feels hot, changes color, changes shape, or is in an unusual condition.
Speak with your sales office if one or more of these problems occurs. Damage to the battery and injury
to persons can occur.
CAUTION
Applicability: Cameras with one or more batteries.
Only use a specified battery charger when you charge the battery. Damage to the battery can occur if
you do not do this.
CAUTION
Applicability: Cameras with one or more batteries.
Only use a specified battery for the camera. Damage to the camera and the battery can occur if you do
not do this.
CAUTION
Applicability: Cameras with one or more batteries.
The temperature range through which you can charge the battery is ±0°C to +45°C (+32°F to +113°F),
unless other information is specified in the user documentation or technical data. If you charge the battery at temperatures out of this range, it can cause the battery to become hot or to break. It can also decrease the performance or the life cycle of the battery.
#T559845; r. AJ/37554/37554; en-US
5
Safety information
2
CAUTION
Applicability: Cameras with one or more batteries.
The temperature range through which you can remove the electrical power from the battery is -15°C to
+50°C (+5°F to +122°F), unless other information is specified in the user documentation or technical
data. If you operate the battery out of this temperature range, it can decrease the performance or the life
cycle of the battery.
CAUTION
Applicability: Cameras with one or more batteries.
When the battery is worn, apply insulation to the terminals with adhesive tape or equivalent materials
before you discard it. Damage to the battery and injury to persons can occur if you do not do this.
CAUTION
Applicability: Cameras with one or more batteries.
Remove any water or moisture on the battery before you install it. Damage to the battery can occur if
you do not do this.
CAUTION
Do not apply solvents or equivalent liquids to the camera, the cables, or other items. Damage to the battery and injury to persons can occur.
CAUTION
Be careful when you clean the infrared lens. The lens has an anti-reflective coating which is easily damaged. Damage to the infrared lens can occur.
CAUTION
Do not use too much force to clean the infrared lens. This can cause damage to the anti-reflective
coating.
Note The encapsulation rating is only applicable when all the openings on the camera
are sealed with their correct covers, hatches, or caps. This includes the compartments
for data storage, batteries, and connectors.
#T559845; r. AJ/37554/37554; en-US
6
Notice to user
3
3.1 User-to-user forums
Exchange ideas, problems, and infrared solutions with fellow thermographers around the
world in our user-to-user forums. To go to the forums, visit:
http://www.infraredtraining.com/community/boards/
3.2 Calibration
We recommend that you send in the camera for calibration once a year. Contact your local sales office for instructions on where to send the camera.
3.3 Accuracy
For very accurate results, we recommend that you wait 5 minutes after you have started
the camera before measuring a temperature.
3.4 Disposal of electronic waste
As with most electronic products, this equipment must be disposed of in an environmentally friendly way, and in accordance with existing regulations for electronic waste.
Please contact your FLIR Systems representative for more details.
3.5 Training
To read about infrared training, visit:
• http://www.infraredtraining.com
• http://www.irtraining.com
• http://www.irtraining.eu
3.6 Documentation updates
Our manuals are updated several times per year, and we also issue product-critical notifications of changes on a regular basis.
To access the latest manuals, translations of manuals, and notifications, go to the Download tab at:
http://support.flir.com
It only takes a few minutes to register online. In the download area you will also find the
latest releases of manuals for our other products, as well as manuals for our historical
and obsolete products.
3.7 Important note about this manual
FLIR Systems issues generic manuals that cover several cameras within a model line.
This means that this manual may contain descriptions and explanations that do not apply
to your particular camera model.
3.8 Note about authoritative versions
The authoritative version of this publication is English. In the event of divergences due to
translation errors, the English text has precedence.
Any late changes are first implemented in English.
#T559845; r. AJ/37554/37554; en-US
7
Customer help
4
4.1 General
For customer help, visit:
http://support.flir.com
4.2 Submitting a question
To submit a question to the customer help team, you must be a registered user. It only
takes a few minutes to register online. If you only want to search the knowledgebase for
existing questions and answers, you do not need to be a registered user.
When you want to submit a question, make sure that you have the following information
to hand:
• The camera model
• The camera serial number
• The communication protocol, or method, between the camera and your device (for example, HDMI, Ethernet, USB, or FireWire)
• Device type (PC/Mac/iPhone/iPad/Android device, etc.)
• Version of any programs from FLIR Systems
• Full name, publication number, and revision number of the manual
#T559845; r. AJ/37554/37554; en-US
8
Customer help
4
4.3 Downloads
On the customer help site you can also download the following, when applicable for the
product:
• Firmware updates for your infrared camera.
• Program updates for your PC/Mac software.
• Freeware and evaluation versions of PC/Mac software.
• User documentation for current, obsolete, and historical products.
• Mechanical drawings (in *.dxf and *.pdf format).
• Cad data models (in *.stp format).
• Application stories.
• Technical datasheets.
• Product catalogs.
#T559845; r. AJ/37554/37554; en-US
9
Quick Start Guide
5
5.1 Procedure
Follow this procedure:
1. Put a battery into the battery compartment.
2. Charge the battery for 4 hours before starting the camera for the first time, or until the
green battery condition LED glows continuously.
3. Insert a memory card into the card slot.
4. Push
to turn on the camera.
5. Aim the camera toward the object of interest.
6. Adjust the focus by rotating the focus ring.
Note It is very important to adjust the focus correctly. Incorrect focus adjustment affects how the image modes Thermal MSX, Thermal, and Picture-in-picture work. It also affects the temperature measurement.
7. Push the Save button (the trigger) to save an image.
8. Install FLIR Tools on your computer.
9. Start FLIR Tools.
10. Connect the camera to the computer using the USB cable.
11. Import the images into FLIR Tools and create a PDF report.
#T559845; r. AJ/37554/37554; en-US
10
List of accessories and services
6
Product name Part number
Battery charger, incl. power supply with multi
plugs (Exx, Kxx)
T198125
Bluetooth Headset
T197771ACC
Calibration including General maintenance Exx
T199839
Cardboard box with printing 280 x 200 x 120 mm
T127477
Cigarette lighter adapter kit, 12 VDC, 1.2 m/3.9 ft. T198509
FLIR Reporter Professional (license only) T198586
FLIR ResearchIR Max + HSDR 4 (hardware sec.
dev.)
T198697
FLIR ResearchIR Max + HSDR 4 (printed license
key)
T199014
FLIR ResearchIR Max + HSDR 4 Upgrade
(printed license key)
T199044
FLIR ResearchIR Max 4 (hardware sec. dev.) T198696
FLIR ResearchIR Max 4 (printed license key) T199013
FLIR ResearchIR Max 4 Upgrade (printed license
key)
T199043
FLIR ResearchIR Standard 4 (hardware sec. dev.)
T198731
FLIR ResearchIR Standard 4 (printed license key)
T199012
FLIR ResearchIR Standard 4 Upgrade (printed license key)
T199042
FLIR Tools T198584
FLIR Tools+ (download card incl. license key) T198583
High-temperature lens T199235
IR lens, 76 mm (6°) with case and mounting support for Exx
T198113
IR lens, f = 10 mm, 45° incl. case
1196960
IR lens, f = 30 mm, 15° incl. case
1196961
IR Window 2 in 19250-100
IR Window 3 in. 19251-100
IR Window 4 in. 19252-100
Li-Ion Battery pack 3.7V 17Wh T198487
Memory card SDHC 4 GB T911230ACC
One year extended warranty for Exx series
T199837
Pouch for FLIR Exx series T198484
Power supply, incl. multi plugs T910814
SS IR Window 2 in.
19250-200
SS IR Window 3 in.
19251-200
SS IR Window 4 in.
19252-200
Sun shield
T198485
Tool belt T911093
Transport case Exx
T198341ACC
Tripod Adapter T198486
USB cable Std A <-> Mini-B
1910423
Video cable
1910582ACC
#T559845; r. AJ/37554/37554; en-US
11
List of accessories and services
6
Note FLIR Systems reserves the right to discontinue models, parts or accessories,
and other items, or to change specifications at any time without prior notice.
#T559845; r. AJ/37554/37554; en-US
12
Camera parts
7
7.1 View from the right
7.1.1 Figure
7.1.2 Explanation
1. Cover for the right-hand compartment:
• USB-A connector.
• USB mini-B connector.
• Power connector.
2. Save button.
3. Tripod mount. Requires an adapter (extra accessory).
4. Focus ring.
5. Infrared lens.
#T559845; r. AJ/37554/37554; en-US
13
Camera parts
7
7.2 View from the left
7.2.1 Figure
7.2.2 Explanation
1. Laser pointer.
2. Lamp for the digital camera.
3. Digital camera.
4. Cover for the left-hand compartment:
• Video out connector (composite video).
• Memory card slot.
#T559845; r. AJ/37554/37554; en-US
14
Camera parts
7
7.3 LCD and keypad
7.3.1 Figure
7.3.2 Explanation
1. Touch-screen LCD.
2. Navigation pad with center push.
3. Image archive button.
4. Button to operate the laser pointer.
5. On/off button.
Function:
• Push the
button to turn on the camera.
• Push and hold the
button for less than 5 seconds to put the camera in stand-
by mode. The camera then automatically turns off after 6 hours.
• Push and hold the
button for more than 10 seconds to turn off the camera.
6. Back button.
#T559845; r. AJ/37554/37554; en-US
15
Camera parts
7
7.4 View from the bottom
7.4.1 Figure
7.4.2 Explanation
1. Latch to open the cover for the battery compartment. Push to open.
#T559845; r. AJ/37554/37554; en-US
16
Camera parts
7
7.5 Battery condition LED indicator
7.5.1 Figure
7.5.2 Explanation
Type of signal Explanation
The green LED flashes two times per second. The battery is being charged.
The green LED glows continuously. The battery is fully charged.
#T559845; r. AJ/37554/37554; en-US
17
Camera parts
7
7.6 Laser pointer
7.6.1 Figure
Figure 7.1 This figure shows the difference in position between the laser pointer and the optical center of
the infrared lens.
WARNING
Do not look directly into the laser beam. The laser beam can cause eye irritation.
CAUTION
Protect the laser pointer with the protective cap when you are not using the laser pointer.
Note The symbol
is displayed on the screen when the laser pointer is on.
Note The laser pointer may not be enabled in all markets.
7.6.2 Laser warning label
A laser warning label with the following information is attached to the camera:
7.6.3 Laser rules and regulations
Wavelength: 635 nm. Maximum output power: 1 mW.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
#T559845; r. AJ/37554/37554; en-US
18
Screen elements
8
8.1 Figure
8.2 Explanation
1. Measurement tools (e.g., spotmeter).
2. Measurement result table.
3. Status icons and notifications.
4. Temperature scale.
5. Lamp toolbar button.
6. Temperature scale toolbar button.
7. Color toolbar button.
8. Measurement toolbar button.
9. Image modes toolbar button.
10. Recording mode toolbar button.
11. Settings toolbar button.
Note To display the menu system, tap the screen or push the navigation pad.
#T559845; r. AJ/37554/37554; en-US
19
Navigating the menu system
9
9.1 Figure
9.2 Explanation
The figure above shows the two ways to navigate the menu system in the camera:
• Using the touch screen LCD to navigate the menu system (left).
• Using the navigation pad to navigate the menu system (right).
#T559845; r. AJ/37554/37554; en-US
20
Loading...