Flir DN1142E44, DNR1146, DNR1186 User Manual
Quick Connection Guide
DNR110 Series
HD Network Video Surveillance Recorder
Package contents:
NVR
Power Adapter
Quick Start Guides
USB Mouse
Ethernet Cable
Connecting your system
Mouse
1
For best performance it
is recommended to use
a 1080P monitor/TV and
set the NVR’s output
resolution to 1920x1080.
See the instruction
manual for details.
Monitor/TV*
2
!
VGA*
OR
HDMI*
3
Router*
4
IP Cameras*
Ethernet Extension Cable*
NOTE: It may take up to
1 minute for cameras
to start up and transmit
video to your NVR.
Recommended: Connect
cameras to NVR
Connect cameras to a PoE
Switch* or Router* on your
network. See “Adding cameras
from the LAN” on reverse for
more details.
OR
5
Power
FULL INSTRUCTION MANUAL ONLINE
Software and complete
instruction manual available on:
flir.com/security/support
Information in this document is subject to change without notice. As
our products are subject to continuous improvement, FLIR Systems,
Inc. and our subsidiaries reserve the right to modify product design,
specifications and prices, without notice and without incurring any
obligation.
E&OE © 2015 FLIR Systems, Inc. All rights reserved.
4-channel configuration shown. Other channel configurations will have the respective number of video inputs.
*Not included/sold separately.
This system features automatic
firmware upgrades for enhanced
functionality. It is required to upgrade
your system to the latest firmware
version.
If a firmware upgrade is available:
1. After startup, a notification will
appear asking you to upgrade the
firmware. Click OK to upgrade.
2. The system will download and
install the firmware upgrade. Wait
for the firmware update to complete.
The system may restart during the
firmware upgrade process.
DO NOT power off or disconnect
the power cable during firmware
installation.
DNR110_SERIES_QCG_EN_R1
Quick Connection Guide
DNR110 Series
HD Network Video Surveillance Recorder
Using the mouse
Left-click:
• Click to open the Navigation Bar.
Right-click to close the Navigation Bar.
• During split-screen display mode:
Double-click an individual channel
1 2
to view it in full-screen. Double-click
again to return to the split-screen
display mode.
• While navigating menus: Click to open
a menu option.
Right-click:
• During live view: Right-click anywhere
on the screen to open the Quick Menu.
• Within system menus: Right-click to
exit menus.
Adding cameras from the LAN
Follow the steps below to add cameras that are not directly connected to the Power over
Ethernet (PoE) ports on the back of the NVR.
NOTE: Please visit flir.com/security/support for a list of compatible IP cameras.
Setting the date and time
It is important to set the correct time to ensure accurate time
stamps on video recordings.
In live view, right-click and click Main Menu.
1.
Log in using the system user name (default: admin) and password (default: 000000).
2.
3.
Click and
select Setting
Click General and select the Date&Time tab.
4.
Enter the current time and
select your time zone, and
click OK
Check DST to enable auto
Daylight Savings Time
updates
(Optional) Check NTP to
sync your system with an
Internet time server. Click
Manual Update to instantly
update the time
Playback and search
From live view, right-click and then click Search.
1.
Log in using the system user name (default: admin)
2.
and password (default: 000000).
Use the calendar on the right to select the date to
3.
playback.
Use the drop-down menus to select the channels you
4.
would like to playback. Click the display options
( ) to playback multiple channels
simultaneously.
Click inside the video bar to select the playback time.
5.
Playback starts immediately at the selected time.
Select the day
to playback
Connect the camera to a router or switch on the same network as the NVR.
1.
Right-click and select Device Search. Log in using the admin account (default
2.
User Name: admin; default Password: 000000).
Click Device Search.
3.
Check the camera(s) you would like to add.
4.
Click Add. The Status indicator turns
5.
green to show the camera is successfully
connected.
NOTE: If the Status indicator is red, click .
Update the camera user name, password,
ports, and manufacturer as needed.
Click OK to save changes.
6.
Click Apply to save changes.
5.
NOTE: A constant Internet
connection is required to
use NTP
Using the Quick Menu
Right-click to open the Quick Menu.
Select camera/live display view
Control PTZ cameras (not included)
Control auto-focus cameras (not included)
Adjust color settings
View system information
Start/stop sequence mode
Disable beeping alarms
Search and playback recordings
Open manual recording controls
Add IP cameras over the LAN
Open Main Menu
Select channels
to playback
Click inside the bar to select a
playback time.
DNR110_SERIES_QCG_EN_R1
Loading...