Flir ACC60WPMS1 Quick Start Guide

Quick Start Guide

ACC60WPMS1

High PoE Midspan

Package Contents

• High PoE Midspan

• Power Cable

• Mounting Screws (×3)

• Quick Start Guides

Dimensions

6.0”
151mm

1.6”
39mm

Connection

Switch / NVR*

1

Connect the midspan to a power source using the included

3

power cable.

Front Panel

2

Compatible
Network Camera*

Up to 328ft / 100m

2.8” / 71mm

FCC Notice

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

Information in this document is subject to change without notice. As our products are subject
to continuous improvement, FLIR Systems, Inc. and our subsidiaries reserve the right to modify
product design, specifications and prices, without notice and without incurring any obligation.
E&OE © 2017 FLIR Systems, Inc. All rights reserved.

*Not included / sold separately.

ACC60WPMS1_QSG_EN_R1

Quick Start Guide

ACC60WPMS1

High PoE Midspan

Technical Specifications

Name Specification

Ports 1x 10/100/1000Base-T (Data IN)

PoE Standard IEEE 802.3af / 802.3at PoE / High PoE (max 60W)

PoE Power Output 54V DC, Max. 60 watts

PoE Class Class 0/1/2/3/4/5

Operating Humidity 10 ~ 90% (non-condensing)

Operating Temperature -22 ~ 149°F / -30 ~ 65°C

Power Input 100~240V AC, 50/60Hz, 1.7A Max

Weight 0.30kg / 0.65lbs

1x 10/100/1000Base-T PoE power supply (POE OUT)

LED Indicators

Power Status

Name Color Meaning

PWR Green

PoE Output

Name Color Meaning

POE Green

ON: The Midspan is receiving power.
OFF: The Midspan is not powered.

ON: Port is providing in-line power.
OFF: Connected device is not a PoE Powered Device

(PD).

Installation

This Midspan is intended for INDOOR installation only.

Mounting the Midspan

Flat Mounting
Surface

2.8”
71mm

Mounting
Screws (2×)

Screw Distance from
Mounting Surface

0.1 ”
3mm

Flat Mounting
Surface

Safety Precautions

• Use the Midspan with compatible FLIR cameras only. To ensure compatibility, see High
PoE midspan datasheet.

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• There are no user serviceable parts inside the Midspan. Please do not disassemble
the Midspan.

• Do not expose the Midspan to sunlight. Use the Midspan within given temperature,
humidity and voltage levels noted in the Technical Specifications section.

• Make sure to install the Midspan on a flat surface in an area that can support the
Midspan weight.

• Slots and openings in the Midspan are provided for ventilation to ensure reliable
operation of the Midspan and to protect it from overheating. These openings must
not be blocked or covered.

• Do not place any object on the Midspan.

• Midspan is rated for indoor installation only.

ACC60WPMS1_QSG_EN_R1