Flip Video 3250-00008, 100201-RR User Manual

User In s tr u ct io n s • B en u tz e r ha nd b uc h • G u id e d e l ’ut i li s at e ur

D

underwater case

DE

Unterwassergehäuse

FR

boîtier sous-marin

IMP O RTANT • W i ch ti g

Please read instructions carefully to safely use the underwater case with your Flip Video™ camcorder.

EN

This product has been designed for use with 2nd Generation Flip Ultra™ and Flip UltraHD™ camcorders only.

Bitte lesen Sie diese Anweisungen aufmerksam, da sie wichtige Informationen zur sicheren Verwendung des

DE

Unterwassergehäuses mit Ihrem Flip Video™-Camcorder enthalten. Dieses Produkt wurde ausschließlich für die
Verwendung mit der 2. Generation der Flip Video Ultra™- und der Flip Video UltraHD™-Camcorder entwickelt.

Veuillez lire les instructions attentivement afin d’utiliser votre boîtier sous-marin en toute sécurité avec le

FR

caméscope Flip Video™. Ce produit est conçu pour être utilisé exclusivement avec les caméscopes Flip Video
Ultra™ et Flip Video UltraHD™ de 2e génération.

Loading your camcorder into the Flip Video™ Underwater Case

3

IMPORTANT

Before using the Flip Video™ Underwater Case, make sure that it is completely dry and clean. A single
grain of sand or strand of hair can break the seal, resulting in leaks and possible damage to your
camcorder. Use a clean, soft, lint-free cloth to dry the case.

1

Open the Flip Video™ Underwater Case
by lifting the safety latch and turning the
locking knob counterclockwise.

2

Place camcorder in underwater case
bottom end first and align the front
of the camcorder with the lens of the
case. Camcorder will fit snugly.

1

2

English

3

Close the underwater case.
Turn the locking knob clockwise
until the yellow lines on the knob
and back of case line up. Then,
press the safety latch down flat
into locked position.

1

English

Recording videos with the Flip Video™ Underwater Case

1

To turn on the camcorder while it is in the underwater case, push the power button.

2

The buttons on the back of the underwater case match those on the back of the camcorder.

Notes

• Daylight is greatly reduced underwater. The camcorder
will automatically adjust to the varying light conditions.

• The distance at which you can see and record underwater
depends on the clarity of the water, not necessarily on the
lighting conditions.

• Due to the optical properties of the water, the video will
appear bluer the deeper you dive. This is normal.

• Due to the differences in temperature, moisture can
build up on the surface of the lens when the camera is
taken from land to water (and vice versa). To ensure
video quality, please wait for moisture to evaporate.

• After use, remove the camcorder and wash the underwater
case thoroughly with water (especially after use in
seawater). Dry the case with a clean, soft, lint-free cloth.

• When storing the underwater case, loosen the locking
knob. Ensure that the case is thoroughly dry and store it in a
clean, well-ventilated, dark and dry location.

• The camcorder will turn itself off after 90 seconds of idle
time in order to preserve power.

LOCKING KNOB

PLAY

PREVIOUS NEXT

RECORD

SAFETY LATCH

YELLOW LINE

POWER

ZOOM IN

DELETE

ZOOM OUT

Important Safety Precautions

• The Flip Video™ Underwater Case is designed to work with 2nd Generation Flip Ultra™ and Flip UltraHD™
camcorders only.

• Do not use the underwater case at water depths exceeding 9 meters (30 ft). Using the case at greater depths can
cause the case to malfunction, suffer damage, or leak. A leaking case could result in damage to your camcorder.

• Do not disassemble or modify the underwater case in any way; doing so can cause leaks and damage to your
camcorder.

• Do not expose to anti-corrosive chemicals such as oil-based lubricants like sunscreen. The case is made of
polycarbonate material and silicone.

• Never open the underwater case in a wet environment. Dry the case thoroughly before opening it on land.

Flip Video Support

Questions and Customer Service: Go to www.theflip.com/support

2