FLI Audio INTEGRATOR 4, INTEGRATOR 5, INTEGRATOR 57, INTEGRATOR 6, INTEGRATOR 69 Instruction Manual

Models: INTEGRATOR 4, 5, 57, 6, 69, 69P

integrator
speakers

www.fliaudio.co.uk

Introduction

This instruction manual is for your safety and must be adhered to at all times. Please read and ensure that you fully
understand

the installation and set up procedures as explained. If you are unclear on the installation or set up of your

FLI

INTEGRATOR speakers please contact your nearest authorised FLI dealer.

Contents

2 x FLI Integrator speakers.
2 x Grills.
8 x Fixing screws.
1 x Cut out template.
2 Lengths of speaker cable.
Warranty card

WARNING

DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL - failure to do so may result in electric
shock

or injury.

ENSURE

GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may result in fire or damage to the product.

KEE

P THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do this may result in an accident. FLI
equipment is capable of producing sound levels that can permanently damage your hearing. FLI recommends caution when listening at
high volume. For safe and enjoyable listening the sound should be comfortable and clear without distortion.

CAUTION

Never connect any speaker lead to the car chassis. This can cause severe damage to your speaker /car radio /amplifier.
Before

drilling or cutting any holes, investigate the layout of your vehicle thoroughly.

Use

caution when working near the fuel / hydraulic lines and electrical wiring.

Observe

the correct polarity when wiring, improper phasing may cause a loss of bass response.

Ensure

that no moving parts catch on the speaker or grill (e.g. window or door handles, or window glass inside the door)

Installation

The quality of the installation will affect the system performance and reliability.
Contact

your nearest authorised FLI dealer if you are unsure about the installation of this product.

Please

mount this unit away from any potential hazards.

Minimising

the length of wires will provide higher audio output from the system.

The

speaker should be securely fastened to the mounting position using the screws provided.
Pre drill your mounting holes using a drill and position with the template provided.
Be

sure to investigate your mounting area thoroughly for electrical wires, brake or fuel lines or fuel tank to prevent causing any damage.

Thank you for purchasing these FLI coaxial speakers. They will provide you with

years of trouble free usage providing you follow a few simple guidelines.

2

Speaker Installation

If necessary cut any material away to allow the speaker to sit correctly.
Cut

out the mounting hole and pre-drill any other fixing holes.
If
If required, the protective grill can be removed from the gasket and onitted from the speaker fitting.

the

grill is to be fitted, screw through both gasket and speaker using the screw provided until the speaker is securely fastened.

Firstl

y, make sure that the speakers will fit in your chosen location. This may involve the removal of the standard vehicle speakers. Please use the

mounting

depth and hole cut dimensions as detailed in this manual for guidance.

3