UNDERGROUND
INSTRUCTION &
INSTALLATION MANUAL
component speakers
MODEL: FU5C, FU6C
2
you for purchasing these FLI UNDERGROUND component speakers. provide you with years of trouble free usage providing you follow a few
guidelines.
manual is for your safety and must be adhered to at all times. Please read and understand the installation and set up procedures as explained. If you are or set up of your FLI UNDERGROUND speakers please contact your
UNDERGROUND dealer.
WARNING
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL
- failure to do so may result in electric shock or inju .
ENSURE GOOD AND CORRECT NNECTIONS - failure to make the correct connections may result in fire or damage to the oduct.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do this may result in an accident. FLI GROUN equipm is capable of producing sound levels that can permanently mage your hearing. FLI UNDERGROUND recommends caution when listening at high volume. For safe and enjoyabl listening the sound should be comfortable and clear without distortion.
CAUTION
• Never connect any speaker lead to the car cha |
. This can cause severe damage to your |
|
speaker / car radio / amplifier. |
|
|
• Before drilling or cutting any holes, |
tigate the layout of your vehicle thoroughly. |
|
• Use caution when working near the fuel / hydrau |
lines and electrical wiring. |
|
• Observe the correct polarity when |
ng, improper phasing may caus a loss of bass |
|
response. |
|
|
• Ensure thatt no moving parts catch on the speaker or grill (e.g. window or door handles, or window lass inside the door)
INSTALLATION
• The quality of the installation will affect he syste performance and reliability.
•ontact your nearest authorised FLI dealer if you are unsure about the installation of this roduct.
•lease mount this unit away from any potential hazards.
•Minimising the length of wires will provide higher audio output from the system.
•The speaker should be securely fastened to the mounting position using the screws provided.
•Pre drill your mounting holes using a drill and position with the template provided.
•Be sure to investigate your mounting area thoroughly for electrical wires, brake or fuel lines or fuel tank to prevent causing any damage.
3
SPEAKER INSTALLATION
Firstly, make sure that the speakers will fit in your chosen location. This may involve the removal of the standard vehicle speakers. Please use the mounting depth and hole cut dimensions as detailed in this manual for guidance.
•If necessary cut any material away to allow the speaker to sit correctly.
•Cut out the mounting hole and pre-drill any other fixing holes.
•If required, the protective grill can be removed from the gasket and omitted from the speaker fitting.
•If the grill is to be fitted, screw through both gasket and speaker using the screw provided until the speaker is securely fastened.
Loading...