FLI Audio FT10AP-F6, FT12A-F6, FT12TA-F6 User Manual
ACTIVE ENCLOSURES
FT10A-F6, FT10AP-F6, FT12A-F6, FT12TA-F6
2
OWNERS MANUAL
WARNING
ATTENTION
Congratulations on purchasing your FLI bass enclosure. Please read this manual in order to fully
understand how to get the best results from this product and ensure that all advice on how to look
after the product is followed.
Thank you for buying FLI, we hope you enjoy listening to your product as much as we enjoyed
creating it.
During the normal use of this amplier the heatsink may become very hot.
Please do not touch during or immediately after use.
Please ensure that when installing this product the heatsink will not come into contact
with any materials that may be damaged by heat such as upholstery or plastics.
An aftermarket audio amplier will place an additional load on the vehicles charging system.
Most modern vehicles have sufcient capacity in the charging system as not all the electrical
components of the vehicle will be switched on at once.
Check the fuse rating of the amplier and use this as the peak current requirement.
Generally the continuous current draw will be a third of the peak current.
3
LIMITED WARRANTY
All FLI products carry a full 12 month warranty, valid from the date of the original receipt and proof
of purchase. In order to validate this warranty, the online warranty card should be completed within
seven days of the original purchase date. The original receipt and packaging should be retained for
this twelve month period. If the product develops a problem any stage during the warranty period,
it should be returned to the point of purchase in it’s original packaging, and complete with no items
missing. If the store is unable to repair the product it may have to be returned to FLI. this process
should take around seven working days and all costs will be absorbed by FLI.
A full description of FLI’s warranty information can be found on our website:
www.iaudio.com/warranty
WHAT IS NOT COVERED
• Damage to product due to improper installation.
• Subsequent damage to other components
• Damage caused by exposure to moisture, excessive heat, chemical cleaners and / or UV
radiation.
• Damage through negligence, misuse, accident or abuse. Repeated returns for the same fault may
be considered abuse.
• Any cost or expense related to the removal and / or re-installation of the product.
• Damage caused by amplier clipping or distortion.
• Items repaired or modied by any unauthorised repair facility
• Return shipping on non defective items.
• Products returned without a returns authorisation number.
• Damage to product due to use of sealant.
INTERNATIONAL WARRANTY
Contact your international FLI dealer or distributor concerning specic procedured for your country’s
warranty policies.
WARNING
FLI Equipment is capable of sound pressure levels that can cause permanent damage to your
hearing and those around you. Please use common sense when listening to your audio system and
practice safe sound.
COPYRIGHT
All content included in this manual such as text, graphics, logos, icons, images and data, are the property of Midbass Distribution Limited t/a FLI audio
(herein referred to as “FLI”, “us” or “we”) and its afliate or their content and technology providers, and are protected by United Kingdom and International
copyright laws. All rights reserved. FLI, Frequency, Trap, Loaded, Integrator, Comp, Acid, Underground, FLItech, Stuff, FIREFLI and all stylised
representations of product names, or the abbreviations of product names, as logos are all trademarks of FLI. Graphics and logos are trademarks or trade
dress of FLI audio or its subsidiaries. FLI’s trademarks and trade dress may not be used in connection with any product or service that is not FLI’s, in any
manner that is likely to cause confusion among customers or in any manner that disparages or discredits FLI. All other trademarks not owned by FLI or its
subsidiaries that appear in this manual are the property of their respective owners, who may or may not be afliated with, connected to, or sponsored by
FLI or its subsidiaries.
TO THE FULLEST EXTENT PERMITTED AT LAW, FLI IS PROVIDING THIS MANUAL AND ITS CONTENT ON AN “AS IS” BASIS AND MAKES NO (AND
EXPRESSLY DISCLAIMS ALL) REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO THIS MANUAL
OR THE INFORMATION, CONTENT, MATERIALS OR PRODUCTS INCLUDED IN THIS MANUAL INCLUDING, WITHOUT LIMITATION, WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN ADDITION, FLI DOES NOT REPRESENT OR WARRANT THAT THE
INFORMATION CONTAINED IN THIS MANUAL IS COMPLETE OR CURRENT, AND THAT ALL SPECIFICATIONS AND INFORMATION CONTAINED
WITHIN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. FLI RECOMMEND CAUTION WHEN LISTENING TO MUSIC REPRODUCED
THROUGH FLI EQUIPMENT. FLI EQUIPMENT IS CAPABLE OF PRODUCING SOUND AND SOUND PRESSURE LEVELS THAT CAN PERMANENTLY
DAMAGE HEARING OF YOU AND THAT OF OTHERS. FOR SAFE AND ENJOYABLE LISTENING, THE SOUND SHOULD BE CLEAR WITHOUT
DISTORTION AT A COMFORTABLE VOLUME. BY USING ANY FLI EQUIPMENT, YOU AGREE TO TAKE FULL RESPONSIBILITY FOR YOUR OWN
SAFETY AND THE SAFETY OF OTHERS WHEN LISTENING TO MUSIC AT HIGH VOLUMES THROUGH EQUIPMENT YOU HAVE PURCHASED. USE
OF ANY FLI EQUIPMENT CONSTITUTES AGREEMENT TO THIS DISCLAIMER.
Except as specically stated in this manual, to the fullest extent permitted at law, neither FLI nor any of its afliates, directors, employees or other
representatives will be liable for damages arising out of or in connection with the use of this manual or the information, content, materials or products
included.
This is a comprehensive limitation of liability that applies to all damages of any kind, including (without limitation) compensatory, direct, indirect or
consequential damages, loss of data, income or prot, loss of or damage to property and claims of third parties. For the avoidance of doubt, FLI does
not limit its liability for death or personal injury to the extent only that it arises as a result of negligence of FLI, its afliates, directors, employees or other
representatives.
4
MOUNTING GUIDELINES
POWER CONNECTIONS
POWER CABLE
Your FLI enclosure is designed with a swift installation routine in mind.
Before xing the enclosure in place please ensure that there is sufcient air ow around the exterior of
the amplier casing, at least two inches is sufcient.
• At least 10 gauge cable should be used for the power connection to the amplier.
• The power cable should be taken directly from the battery. Rubber grommets should be used when
passing through any bulkheads to prevent the cable from becoming chaffed or cut.
• It is vital that a fuse / circuit breaker (of at least equal value to the one tted on the amplier) is
placed inline with the power cable and is no further than eighteen inches away from the battery.
• Please ensure that the fuse is not tted until the entire installation procedure is complete.
• The two tables overleaf are to help you decide on what cable is correct for you. The rst enables you
to select the size of cable depending on the length required. The second will help you convert the
cable size from American Wire Gauge to Metric and Imperial if you need to.
Chassis ground
Remote turn on
Fuse close to battery
Battery
Loading...