FlexLink Chain washing unit User Manual
Chain Washing unit
A FlexLink standard solution 5686EN-1
Chain washing unit
The inline chain washing unit is designed to run continuously when working with production lines that
have a high degree of product spillage. The result is
a cleaner chain that allows longer production runs
without the need for CIP or routine maintenance.
The chain cleaner prevents product build up on the chain
and allows continuous fault free running of the line with
the need to stop the conveyor and remove the chain to
clean by hand.
Supplied as a complete unit the chain washer can quickly
be integrated into new conveyor lines or upgraded to
existing conveyor lines in order to improve performance
and reliability
Technical bulletin 5686EN-1 1
Standard features
• Robust – the system is robust and designed to operate within harsh environment where spillages on the
conveyor are highly likely.
• Compact – the unit will take up the smallest footprint
possible.
• Clean – clean design with sloping faces and minimum
areas for fluid or dirt to build up.
• Safe – fully guarded design.
• Simple installation – mount to conveyors using
standard fittings.
Chain Washing unit
System information
The washing unit is available for aluminium conveyor systems XS, XL, X85, XH and XK, and stainless systems
XLX and X85X.
Technical specification
Minimum top of chain height ............. 550 mm
Maximum conveyor length ................. 3 m
Maximum conveyor speed ................. 50 m/min
Chain washer
Chain washer
Operating requirements
Water supply attachment
Connection of water/cleaning system is made by G ½''
internal thread connection. Maximum/Minimum flowrate
required is 11–13,5 l/min.
Drainage Vacuum
Vacuum attachment is made by Ø32 hose connection.
Vacuum requirements are 23,5 kPa minimum with a
vacuum of 2x56 l/second.
Spare parts
Spray nozzle
Brush Ø80
Brush Ø180
8042716
8042673
8042672
Chain washer
Chain Washing Unit XS
Chain Washing Unit XL
Chain Washing Unit XLX
Chain Washing Unit X85
Chain Washing Unit X85X
Chain Washing Unit XH
Chain Washing Unit XK
Note. 1 m long beam section
Note!
The chain washing unit cannot be used with an
enclosed or guided type of conveyor drive unit.
8044023
8044024
8044025
8044026
8044027
8044029
8044028
2 Technical bulletin 5686EN-1
Loading...