Fishman Isys, Isys T, Isys Plus User Manual

USER GUIDE
ISYS ONBOARD PREAMPS

www.fishman.com

2

Isys Quick Start

1. Set the controls • Set volume off and the contour control to off (button

out).

2. Plug in • Connect the Isys to an amplifi er or PA with a ¼-inch instrument
cable. The batt light will fl ash once quickly to indicate it has switched on.

3. Turn up • Raise the volume and adjust the contour control to your liking.

3

Isys Controls

Volume • For the cleanest signal, set the volume knob as high as possible,

without causing distortion or feedback.

Contour • This one-button tone control lets you choose between a natural
sound with no EQ (button out) or a “Scooped” sound with emphasized treble
and bass and reduced midrange (button in).

Phase • Use the phase switch to improve bass response at low volume and
suppress feedback at high volume.

When the batt lamp lights steadily it is time to change the battery (approx. 125
hours of use). To conserve the battery, unplug the instrument when not in use.