Fishman INK User Manual

USER GUIDE
INK BODY ONBOARD PREAMP

2

INK Body Quick Start

1. Set the controls • Turn volume, body and notch down and set the bass,

middle, treble and brilliance controls to center as shown.

2. Plug in • Connect INK Body to an amplifier or PA with a ¼-inch instrument
cable. The battery light will flash once quickly to indicate it has switched on.

3. Tune up • Press and hold the right side of the tuner display to activate the
onboard chromatic tuner.

4. Turn up • Raise the volume and adjust the bass, middle, treble and
brilliance controls to your liking.

5. Mix in the body sensor • Raise the body control to mix in the onboard
body sensor.

3