Fisher-Price X7751 Instruction Sheet
X7751
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “C” batteries for operation (included).
Batteries included are for demonstration purposes only.
Adult assembly is required for crib attachment and battery replacement.
Tool required: Phillips screwdriver (not included).
fisher-price.com
Battery
Replacement
For best performance, we recommend replacing the batteries that
came with this toy with four, new
“C” (LR14) batteries.
• Locate the battery compartment on
the back of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove the door.
Remove the exhausted batteries
and dispose of them properly.
• Insert four, new “C” (LR14)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• If this toy begins to operate errati-
cally, you may need to reset the
electronics. Slide the power/volume
switch off and back on.
• If sounds, lights or motions become
faint or stop, it's time for an adult to
change the batteries.
Battery Safety
Information
1,5V x 4
“C” (LR14)
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or
ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the product.
Dispose of batteries safely. Do not
dispose of product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-recharge-
able batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
2
Loading...