Fisher-Price X6020 User Manual
X6020
Product features and decorations may vary from the photograph.
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required. Tools required for assembly:
Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
Requires three "AA" batteries (included).
Batteries included are for demonstration purposes only.
Age: 2-6 years.
Weight limit: 60 lbs (27 kg).
IMPORTANT! It is good practice to start training children very young regarding the importance of helmet use.
When children are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they
ride. For this reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes
a habit for life. Choose a helmet that complies with requirements of the applicable certifying agency for bicycle helmets.
fi sher-price.com
Consumer Information
WARNING
TO AVOID SERIOUS INJURY:
• Continuous adult supervision is required.
• Never use near cars and other motor vehicles,
near streets, steps, sloped driveways, hills,
roadways, alleys, swimming pools or other
bodies of water.
• Always wear shoes.
• Never allow more than one rider.
• Please save all packaging material until assembly is complete
to ensure that no parts are discarded.
• Please wipe each part with a clean, dry cloth before assembly.
• Some parts shown are assembled to both sides of the trike.
• Tighten assembled screws with a Phillips screwdriver.
Do not over-tighten the screws.
• Parts not shown: labels and assembly tool.
Headlight
Cover
Handlebar
FASTENERS SHOWN ACTUAL SIZE
#8 x 3/4" (1,9 cm) Screw – 4
Cap Nut – 1
#8 x 3" (7,6 cm) Screw – 1
#6 x ½" (1,3 cm) Screw – 3
Front Wheel
Fork
Frame
2 Fork Covers
Axle Assembly
Seat
Cap
Seat Retainer
Straight Axle
2 Hubcaps
Pedal
4 Pedal Hubs
2 Rear Wheels
2
2 Covers
Assembly
CAUTION
This package contains small parts.
For adult assembly only.
Rear Wheel
(Indented Side Down)
Hubcap
(Peg Side Up)
Straight Axle
1
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Frame
Cap Nut
Rear Wheel
(Indented Side Up)
Straight Axle
Frame
Assembled
Rear Wheel
Scrap Block
3
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled rear
wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the
straight axle.
• Insert one of the tabs on a cover into a slot in the hubcap.
Push to snap the cover into place. Repeat this procedure to
attach the other cover to the other hubcap.
of Wood
Hubcap
(Peg Side Down)
Cover
Hubcap
Cap Nut
Assembly Tool
Hole
Straight Axle
2
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
BOTTOM VIEW
Hole
Pedal Hub
Pedal Axle
Tabs
Slot
Pedal Hub
4
• Fit two pedal hubs onto the pedal axle tabs. Make sure the
tabs t into the slot in each pedal hub.
3
Loading...