
W1443
TM
Please keep this instruction sheet for future reference,
as it contains important information.
Adult setup is required.
www.fisher-price.com

Important Information
Adult supervision is recommended. •
Paints may stain some surfaces. •
Protect the play area before use.
Water toys sometimes get •
messy. Do not play with this toy
on surfaces that can be damaged
by water.
Keep paint away from eyes.•
After each use, drain and rinse •
this toy. Dry thoroughly
before storing.
If paint gets on skin, wash with •
soap and water. Wash hands
with soap and water after use.
Avoid contact with finished and •
unfinished wood, matte finish paint,
wallpaper, painted walls, carpeting
and other material that cannot be
washed or laundered.
If paint gets on clothing, pretreat •
with a stain remover and wash
separately in warm water as soon
as possible. A second washing may
be necessary to remove paint.
2

CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2011 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA W1443pr-0920

Twist to remove the cap from the •
paint bottle. Remove and discard
the seal on the paint bottle, then
replace the cap.
Fill the no-spill paint cups •
with paint.
Note: To prevent paints from
drying out, empty paint from the
no-spill cups after each use.
Setup
Twist to remove the cap from the •
froggy water dispenser. Fill with
water to the fill line and replace
the cap.
Fit the dispenser into the base.•
Well
The well will automatically fill with •
clean water.
5

Setup
Place newspaper or another •
protective material on your
work surface.
Painting Fun!
Use the mixing tray to mix paint •
colors. Dip your brush in the well to
clean or for use with watercolors.
Press the button to drain dirty water •
from the well.
6

Cleanup
Remove the froggy water dispenser •
from the well.
Lift to remove the top of the well •
from the tray.
Carefully remove the bottom of the •
well from the tray and pour dirty
water out. Rinse and replace in
the base.
Clean the froggy water dispenser •
and water well, no-spill paint cups,
paintbrush, mixing tray and base
with a mild soap and water solution.
7

All-in-One Storage
When finished, replace the no-spill paint cups and the paintbrush in the base.•
8