Fisher-Price W1392 User Manual
W1392
Assembled Parts
Assembly
Tail
Dome
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “C” batteries (LR14) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for battery installation: Phillips screwdriver (not included).
Wipe this toy with a clean, damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take this toy apart.
Head
Dome
Tail
Base
Spinner
Base
1
1
“• Snap” the dome onto the base.
Hint: The dome is designed to fit onto the
base one way. If it does not seem to fit,
turn it and try again.
Head
2
1
Fit the head onto the base. Push to •
“snap” in place.
3
1
Fit the tail onto the base. Push to “• snap”
in place.
Spinner
4
1
At an angle, fit one end of the spinner into •
tail, as shown. Push to “snap” the other end
of the spinner in place.
www.fisher-price.com
2 3
Power/Volume Switch
Spin the roller
Roll a ball down
the tail ramp
Consumer Information
CONS
ASSISTANC
Battery Installation
Battery Safety
Ball-popping Action!
UMER
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
ICES-003
This Class B digital apparatus complies •
with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe •
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, meme
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
E
This equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference
and (2) this device must accept any
1,5V x 3
“C” (LR14)
Locate the battery compartment door on
the bottom of the dino base.
Loosen the screws in the battery •
compartment door and remove the door.
Insert three, new “C” (LR14) •
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
Replace the battery compartment door •
and tighten the screws.
If this toy begins to operate erratically, •
you may need to reset the electronics.
Slide the power/volume switch off and
then back on.
When sounds or motion from this toy •
become faint or stop, it’s time for an
adult to change the batteries.
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
FCC Statement (United States Only)
Information
Power/Volume Switch
Slide the power/volume switch to ON •
with low volume or ON with high
volume .
Spin the roller on the front of the dino.•
Roll a ball down
the tail ramp
Spin the roller
Roll a ball down the dino’s tail or drop it •
in the base to see it bounce around inside
the dino, pop out or roll out
his mouth!
When you are finished playing with this •
toy, slide the power/volume switch OFF .
interference received, including interference
that may cause undesired operation.
Protect the environment by not •
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2011 Mattel, Inc. All Rights Reserved.
PRINTED IN CHINA W1392pr-0920
®
and
™ designate U.S. trademarks of Mattel, Inc.
5 6
Loading...