Page 1
W0275
Actual product may vary from the photos.
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four "AA" (LR6) alkaline batteries
(not included) for car operation.
Adult assembly is required. Tool required for battery installation:
Phillips screwdriver (not included).
This product is not recommended for use
on loose dirt or wet surfaces.
www.fisher-price.com
Page 2
e
e
m
Fit the sign posts into the
h
p
sockets in the track.
Each track piece has a number on th
and fit the pieces together! For best performance, w
Fit the building posts into
the sockets in the track.
Asse
Fit t
ram
Fit the flags into the sockets
around the track.
Page 3
bly
bottom. Simply match the numbers
suggest assembling the track on a hard, flat surface.
e trestle under the
track.
Fit the camera onto the
post on the ramp track.
Fit the trestles under the
ramp track.
Fit the sign posts into the
sockets in the track.
Fit the building posts into the
sockets on the start track.
Fit both bridge posts into the
sockets on the track.
Page 4
Deco
r
0
t
u
o
Before applying the labels, wipe the surface wi
Place the labels exactly as shown in the ill
After applying a label, rub it firmly with a clean dry cl
8
9
7
1
2
5
1
4
Page 5
ation
h a clean, dry cloth to remove any dust or oils.
stration and avoid repositioning the labels.
th, starting at the center, to remove any air bubbles.
3
6
11
12
13
Page 6
Battery Installation
Battery Safety
1,5V x 4
"AA" (LR6)
• Locate the battery compartment door
on the bottom of each car.
• Loosen the screw in each battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
•
Insert two "AA" (LR6) alkaline batteries
into each car.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten each screw with a Phillips
screwdriver. Do not over-tighten.
• If a car begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
• When sounds or motions from a car
become faint or stop, it’s time for an
adult to change the batteries!
• Protect the environment by not
disposing of this product with
household waste (2002/96/
EC). Check your local authority
for recycling advice and facilities
(Europe only).
Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Page 7
Race to Win!
1
• Slide the power switch on the bottom
of each car ON .
2
• Shake a car to start the "engine" and
the sound effects.
Hint: For maximum distance, shake the
car 7 or 8 times. Shaking more than this
does not increase the distance
it will travel.
3
• Lift the starting gates on the track.
• Set the cars on the arrows behind the
starting line.
• When both cars are ready, press the
button and they're off.
• When your car stops, pick it up, shake it
and set it down again to rejoin the race.
Hint: You can also race your cars on any
smooth, flat surface. Shake the car, set it
down and let it go.
4
• Turn the camera to knock the cars off
the track!
• When you're finished playing, slide the
power switch on each car OFF .
Page 8
Consumer Information
CE
NSUMER ASSISTAN
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse this toy.
• This toy has no consumer serviceable
parts. Do not take this toy apart.
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
• L’utilisation de ce dispositif est
autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could
void the user's authority to operate
the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference
and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
© Disney/Pixar; Corvette™
©2011 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
PRINTED IN MEXICO W0275pr-0920
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
Loading...