Keep these instructions for future reference as
they contain important information. IMPORTANT:
Please read all “Consumer Information” before
operating your vehicle.
3+
M6339-0920
XCAUTION:Surfaces may become hot
and cause burns if electronics get wet. Do not
operate vehicle through water or snow.
I. CONTENTS / FEATURES
Vehicle
Transmitter
Vehicle
q ON(I)/OFF(O) switch
I
q
o
Transmit ter
q Steering wheel control: forward/reverse/
simple turning left /simple turning right
w Battery door
1
I
o
2
II. VEHICLE OPERATION
FORWARD
LEFT
Slide the upper platform forward (towards the back of
the truck) and then push down.
NOTE: Remove the cars from the lower platform fi rst.
Cars not included.
Cars sold separately, subject to availability.
FORWARD
RIGHT
REVERSEFORWARD
REVERSE
LEFT
REVERSE
RIGHT
III. BATTERY INSTALLATION
Requires
AA alkaline batteries for the transmitter. Batteries not
included.
Vehicle
1. Detach the trailer from the truck, as shown in
2. Use a screwdriver (not included) to unscrew the
3. Install 3 AA batteries (not included), with polarity
4. Replace the battery door and tighten screw.
5. Assemble the trailer to the truck body.
Transmitter
1. Remove the battery cover as shown.
2. Install 2 AA batteries (not included), with polarity
3. Replace the battery cover.
*
3 AA alkaline batteries for the vehicle and 2
drawing to the right.
power clip cover screw, remove the
battery cover.
(+/-) as shown inside the battery
compartment.
(+/-) as shown inside the battery
compartment.
Once the batteries are installed the transmitter
will always be “ON” and will work automatically
the moment you use it.