Fisher-Price M4046 Instruction Sheet

M4046

Please keep this instruction sheet for future reference,

as it contains important information.

Requires three “C” (LR14) alkaline batteries

(not included) for operation.

Adult assembly is required.

Tool required for battery installation:

Phillips screwdriver (not included).

www.fisher-price.com

Fabric Cover

Assembly

Fabric Cover

• Flip up the fabric cover to locate
the valve.

• When first opened, you need to
locate the valve inside the fabric.

• Insert your finger into the fabric
hole and pull the valve through
the fabric hole.

Valve
Cover

Valve
Stem

Valve

• Squeeze the stem on the valve
to inflate the penguin. Do not
over-inflate.

• Close the valve cover once inflated
and push the valve back inside
the fabric.

• Replace the fabric cover.

2

1.5V x 3

“C" (LR14)

Battery Installation

• Locate the battery compartment on
the base.

• Loosen the screw in the battery
compartment door. Remove the
battery compartment door.

• Insert three “C” (LR14) alkaline
batteries.

Hint: We recommend using alkaline
batteries for longer battery life.

• Replace the battery compartment
door and tighten the screw.

• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries!

• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).

3

Wobblin' 'n Gigglin' Fun!

• Slide the power/volume switch to either
on with low volume or on with high
volume

.

• When baby bats the penguin, musical
sound effects play as the penguin
wobbles around.

• When you are finished playing, slide

Power/Volume Switch

the power/volume switch off .

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. PRINTED IN CHINA
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. M4046pr-0920

Battery Safety

Information

In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your
product. To avoid battery leakage:

• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).

• Insert batteries as indicated inside
the battery compartment.

• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of product in a fire.
The batteries inside may explode
or leak.

• Never short-circuit the battery
terminals.

•

Use only batteries of the same or
equivalent type, as recommended.

• Do not charge non-rechargeable
batteries.

• Remove rechargeable batteries from
the product before charging.

• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.

FCC Statement

United States Only

This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant
to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving
antenna.

• Increase the separation between
the equipment and receiver.

• Consult the dealer or an
experienced radio/TV technician
for help.

Note: Changes or modifications not
expressly approved by the manu­facturer responsible for compliance
could void the user’s authority to
operate the equipment.

5

Consumer Information

Care

• Wipe this toy with a clean cloth dampened with a mild soap and water
solution. Do not immerse this toy.

• This toy has no consumer serviceable parts. Do not take this toy apart.

• Check the plastic parts regularly and if broken or cracked, dispose of

them properly.

6