• Your new vehicle requires adult assembly. Please set aside at least
60 minutes for assembly.
• You must charge your battery for 18 - 30 hours before you use your vehicle for the first time. We recommend that you start charging
your battery before beginning assembly. Please see Battery Charging
beginning on page 7 for detailed instructions.
• Read this manual carefully for important safety information and
operating instructions before using your vehicle. Keep this manual
for future reference as it contains important information.
• This vehicle is designed for use on: concrete, grass, asphalt and
other hard surfaces; on generally level terrain; and by children
3 years of age and older.
• This vehicle has been pre-set so it will only operate in low speed.
See the instructions on page 21 to remove the high speed
lock-out screw.
IMPORTANT INFORMATION
• Use this vehicle ONLY outdoors. Most interior flooring can be
damaged by riding this vehicle indoors. Fisher-Price® will not be
responsible for damage to the floor if the vehicle is used indoors.
• To prevent damaging the motors and gears, teach your child to
stop the vehicle before switching direction. Do not tow anything
behind the vehicle or overload it. Do not exceed the maximum
weight capacity of 59 kg (130 lbs).
• This vehicle has adjustable play seat belts. Please note that the
adjustable seat belts are designed to be a play feature and do not
function as protective safety restraints.
• If you have any questions about your Power Wheels® vehicle,
please contact Mattel UK Ltd., Vanwall Business Park, Maidenhead
SL6 4UB. Helpline: 01628 500303; www.service.mattel.com/uk.
2
M3576pr-0726
e IMPORTANT INFORMATION S INFORMACIÓN DE IMPORTANCIA f RENSEIGNEMENTS IMPORTANTS
WARNINGS AND CAUTIONS
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only.
A child could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or the
battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
®
components in products other than Power Wheels® vehicles could
B
B
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 2 (two) riders at a time.
CAUTION
• In the unassembled state, this package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
M3576pr-0726
3
A
C
PARTS
• If you experience a problem with this product, or are missing a part, please contact 01628 500303 or visit us on-line at
www.service.mattel/com/uk.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any
excess lubricant.
Vehicle
Sport Bar
Sport Bar Support - 2
Steering
Wheel
Cap
Steering Wheel
Windshield
Brush Guard
Backpack
Hood
Backpack
Holder
4
Dash
Seat
Door Hinge - 2
(Left and Right)
Door - 2
(Left and Right)
Long Seat Belt Strap
Short Seat Belt Strap - 2
Steering Column
M3576pr-0726
e IMPORTANT INFORMATION S INFORMACIÓN DE IMPORTANCIA f RENSEIGNEMENTS IMPORTANTS
Map Clip
PARTS
B
C
12 Volt Battery
Taillight Lens Set
Spacer - 2
Map
12 Volt Charger
Taillight Housing Set
Cap
#8 x 2,5 cm Screw – 6
#10 x 1,9 cm Screw – 23
0,4 cm x 3,8 cm Pin - 1
#8 x 10,2 cm Screw – 2
#8 - 32 x 4,1 cm Screw – 2
Lens Guard - 2
Hood Latch – 2
Key Assembly
Part Not Shown: Label Sheet
Headlight Lens - 2
Light Cover – 2
#8 Acorn Lock Nut – 2
#8 x 1,6 cm Screw – 1
#8 Lock Nut – 1
1 cm Washer – 1
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten the screws.
Fasteners Shown Actual Size
M3576pr-0726
5
A
D
PARTS PICTURE
Note: Some parts shown are assembled on both sides of the vehicle.
21
28
22
23
19
14
8
7
10
8
14
27
18
26
17
6
15
30
31
11
4
3
9
12
13
29
25
1
Vehicle
2
Steering Column
3
Hood Latch
4
12 Volt Battery
5
12 Volt Charger
6
Key Assembly
7
Taillight Lens
8
Taillight Housing
9
Hood
10
Cap
11
Dash
3
24
5
12
Headlight Lens - 2
13
Lens Guard - 2
14
Short Seat Belt Strap
15
Windshield
16
Brush Guard
17
Steering Wheel
18
Seat
19
Long Seat Belt Strap
20
Spacer - 2
21
Sport Bar
22
Sport Bar Support - 2
1
2
23
Light Cover - 2
24
Door - 2
25
Door Hinge - 2
26
Steering Wheel Cap
27
0,4 cm x 3,8 cm Pin
28
Backpack
29
Backpack Holder
30
Map
31
Map Clip
#8 x 2,5 cm Screw - 6
#10 x 1,9 cm Screw - 23
#8 x 10,2 cm Screw - 2
#8 - 32 x 4,1 cm Screw - 2
#8 x 1,6 cm Screw - 1
Parts Not Shown
#8 Acorn Lock Nut - 2
#8 Lock Nut - 1
1 cm Washer - 1
Label Sheet
20
16
6
M3576pr-0726
e IMPORTANT INFORMATION S INFORMACIÓN DE IMPORTANCIA f RENSEIGNEMENTS IMPORTANTS
BATTERY CHARGING
B
E
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if
vehicle tips over. Always use battery
retainer.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin the
electrical system.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting
in serious injury.
- Use of Power Wheels
products other than Power Wheels
vehicles could cause overheating, fire
or explosion.
• The battery must be handled by adults
only. The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the
battery could result in serious injury.
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the electricity involved in charging the battery.
• Read the safety instructions on the battery.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If
damage or excessive wear is detected, do
not use the charger or the battery until you
have replaced the worn or damaged part.
®
components in
®
CAUTION
Use the charger in dry locations only.
About Thermal Fuses
Your Power Wheels® 12 volt battery is equipped with a built-in
thermal fuse. The thermal fuse is a self-resetting safety device which
automatically “trips” and shuts down operation of the vehicle if the
vehicle is overloaded or the driving conditions too severe. Once a fuse
has “tripped”, remove your foot from the pedal and wait approximately
25 seconds before operating the vehicle again. To avoid repeated
automatic shut-downs, do not overload the vehicle by exceeding the
59 kg (130 lbs) maximum weight capacity or by towing anything behind
the vehicle. Avoid severe driving conditions, such as driving up slopes
or running into fixed objects, which can cause the wheels to stop
spinning while power is still being supplied to the motors and make
sure your child stops the vehicle before switching direction.
If a thermal fuse in a battery continually trips under normal driving
conditions, please contact 01628 500303 or visit us on-line at
www.service.mattel.com/uk.
Important Notes
• Your new battery must be charged for at least 18 hours before
you use it in your vehicle for the first time.
• We recommend that you start charging your battery before beginning
assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to
recharge it.
• Before charging the battery, examine the battery case for cracks and
other damage which may cause sulfuric acid (electrolyte) to leak
during the charging process. If damage is detected, do not charge
the battery or use it in your vehicle. Battery acid is very corrosive and
can cause severe damage to surfaces it contacts.
• Do not charge the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you charge
your battery.
• Use only a Power Wheels® 12 volt charger with "12V" connector
(240 VAC, 50 Hz with an output of 12 VDC, 1200 mA) to charge your
Power Wheels® 12 volt battery.
Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of fire,
electric shock or injury. In the event of any damage, do not use the
charger until the damage has been properly repaired. Please contact
01628 500303 or visit us on-line at www.service.mattel.com/uk.
• If your battery is old and will not accept a charge, do not leave it in
the vehicle. Always remove a dead battery from the vehicle.
M3576pr-0726
7
A
E
BATTERY CHARGING
B
A
Charger
Connector
F
ASSEMBLY
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery, or
help in assembly of the vehicle.
Dash
• Plug the charger connector into the battery
• Plug the charger into a standard wall outlet
Notes:
- The power indicator on the charger does not indicate the charge
status of your battery. The power indicator allows you to see that
there is power from the wall outlet.
- If power flow to the wall outlet is controlled by a switch, make sure
the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the charger into
a ceiling outlet.
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the battery connector from
the charger connector. Unplug the charger from the wall outlet. The
battery is now ready to be installed in your vehicle. Please see the
Battery Installation section on page 18 for detailed instructions on
installing your battery. If your battery is already installed in your
vehicle, simply re-connect the motor harness connector to the battery.
A
.
B
.
Motor
Harness
Connector
Wire
1
• Position the dash on the vehicle.
• Make sure the motor harness connector wire is through the groove
in the dash.
• Insert five #10 x 1,9 cm screws into the dash tabs and tighten.
8
M3576pr-0726
e IMPORTANT INFORMATION S INFORMACIÓN DE IMPORTANCIA f RENSEIGNEMENTS IMPORTANTS
ASSEMBLY
B
F
15
12
14
2
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustration.
• For best results, avoid repositioning a label once it has been applied
to the vehicle.
DASH VIEW
12
5
Steering
Column
4
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• Turn the vehicle on its side.
• Insert the straight end of the steering column up through the hole in
the vehicle frame and the vehicle floor and out through the hole in
the dash.
• While holding the steering column in place, turn the vehicle upright.
BOTTOM VIEW
Hole
Key Assembly
Dash
3
• Insert and “snap” the key assembly into the opening in the dash,
as shown.
Tab U P
Steering
Column
Steering
Wheel
Large Opening UP
5
• Position the steering wheel so that the large opening and the tab on
the steering wheel stem are both UP.
• Fit the steering wheel onto the steering column.
SIDE VIEW
M3576pr-0726
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.