Fisher-Price CJF20 Instruction Sheet
GAUNTLET
ATTACHING TARGETS
4
Peel backing off target before sticking
it to surface.
Do not stick target to walls
✖
or furniture as it may cause
damage to the surface.
REMOVING DARTS
6
Keep one hand pressed on target, hold
dart by the tip and gently peel dart o.
CLEANING DARTS
5
Dust, dirt, and other debris can cause
darts to lose their adhesiveness.
To clean darts, rinse darts’ tips with
tap water or use tape to remove
excess debris.
NOTE: Dry darts before using again.
REPLACING TARGETS
7
& SHIELDS
CONTENTS
1
DYNAMAG™
INSTRUCTIONS
Please keep these instructions for future reference as they contain important information.
WARNING: Do not aim at eyes or face. Only use projectiles supplied
with this toy. Do not re at point blank range.
TO AVOID INJURY: Do not modify rounds, darts, or dart blaster.
Always wear appropriate eye-wear, sold separately.
x 6
REMOVE DARTS
IMMEDIATELY
TO MAINTAIN SMART STICK™
TECHNOLOGY !
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK™ REFILLS.
Each sold separately, subject to availability.
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer
Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628
500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312.
Mattel East Asia Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK,
Tel.: (852) 3185-6500.
China.
Avenue 7, Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: 03-78803817, Fax:
03-78803867.
Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3
CJF20_1100323876_DOM
14
TO LOAD
GAUNTLET
2
A. Fully load clip with darts.
B.
Insert the fully loaded clip from
the top of the blaster with the
arrowheads pointing down.
TO FIRE
3
A. Pull slide all the way back and release.
B.
Press trigger to re!
Pull slide back and press trigger again to re the next dart!
2
Align marking ( ) to
blaster as shown.
Works with all BOOMco.™ clips.
C. Remove empty clip and reload!
a
Click!
b
3
Loading...