Press the light up button
Press the light up button
for fun phrases, songs
and sound effects!
CCR40
Keep these instructions for
future reference as they
contain important information.
Battery installation is required.
Only adults should install batteries.
Required tool: Phillips
screwdriver (not included).
1,5V x 1
AAA (LR03)
Requires one AAA battery
(included) for operation.
Battery included is for
demonstration purposes only.
• For best performance and longer battery life, we
recommend replacing the battery that came with this
toy with one, new AAA (LR03) alkaline battery.
• Loosen the screws in the vehicle bottom with
a Phillips screwdriver. Lift to remove the bottom
of the vehicle to access the battery compartment.
Remove the battery and properly dispose of it.
• Insert one, new AAA (LR03) alkaline battery.
Hint: We recommend using an alkaline battery for
longer battery life.
• Replace the vehicle bottom and tighten the
screws. Do not over-tighten.
Includes Speedway Sensor technology.
Use this car on the Puppy’s
Smart Stages™ Speedway (sold
separately and subject to availability)
and it recognizes and responds to it!
• When sound/light from this product becomes faint
or stop, it’s time for an adult to change the battery.
• Wipe the toy with a clean, damp cloth. Do
not immerse.
• If this product begins to operate erratically, you
may need to reset the electronics. Remove the
battery and reinstall it.
1-800-432-5437 (US & Canada)
MER
1300 135 312 (Australia)
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Battery Safety Information
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of nonuse. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do not
dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they
are only to be charged under adult supervision.
L’utilisation de ce dispositif est autorisée seulement
aux conditions suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressively
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
PRINTED IN CHINA CCR40_1100253761_DOM
©2014 Mattel. All Rights Reserved.