Fisher-Price CCR38 Instruction Sheet

Press the light up button for fun phrases, songs

CCR38

Press the light up button for fun phrases, songs and sound effects!

Keep these instructions for

future reference as they

contain important information.

Battery installation is required.

Only adults should install batteries.

Required tool: Phillips

screwdriver (not included).

1,5V x 1

AAA (LR03)

Requires one AAA battery

(included) for operation.

Battery included is for

demonstration purposes only.

Includes Speedway Sensor technology.

Use this car on the Puppy’s

Smart Stages™ Speedway (sold

separately and subject to availability)

and it recognizes and responds to it!

• For best performance and longer battery life, we recommend replacing the battery that came with this toy with one, new AAA (LR03) alkaline battery.

• Loosen the screws in the vehicle bottom with a Phillips screwdriver. Lift to remove the bottom of the vehicle to access the battery compartment. Remove the battery and properly dispose of it.

• Insert one, new AAA (LR03) alkaline battery.

Hint: We recommend using an alkaline battery for longer battery life.

• Replace the vehicle bottom and tighten the screws. Do not over-tighten.

• When sound/light from this product becomes faint or stop, it’s time for an adult to change the battery.

• Wipe the toy with a clean, damp cloth. Do not immerse.

• If this product begins to operate erratically, you may need to reset the electronics. Remove the battery and reinstall it.

CONSU

1-800-432-5437 (US & Canada)

MER ASSISTANCE

1300 135 312 (Australia)

CAN ICES-3 (B)/NMB-3 (B)

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470.

Outside the United States:

Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.

Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk

Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.

Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.

New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of nonuse. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the product before charging.

• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

FCC STATEMENT (UNITED STATES ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.

PRINTED IN CHINA CCR38_1100253756_DOM