
Press the elephant for
soothing vibrations.
Press and hold for
several seconds
to stop.
soothing vibrations.
Press and hold for
several seconds
to stop.
BFL65
CBP93
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three AA batteries (included).
Batteries included are for demonstration purposes only.
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
fisher-price.com

Battery Replacement and Power
• For longer life, use alkaline
batteries.
• Open the fasteners on the back
of the toy. Remove the sound box
from inside the toy.
• Loosen the screw in the sound
box battery compartment door
with a Phillips screwdriver.
Remove the door.
• Remove the exhausted batteries
and dispose of them properly.
• Insert three, new AA (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screw. Do not
over-tighten.
• Slide the power switch ON
to remove from the try-me
demonstration mode. When you
are finished playing with this toy,
slide the power switch OFF .
• Fit the sound box back inside the
toy. Make sure the button on the
sound box is facing the front of
the toy. Close the fasteners.
• If this toy begins to operate
erratically, you may need to reset
the electronics. Slide the power
switch off and back on.
• When vibrations from this toy
become faint or stop, it’s time for
an adult to change the batteries.

Battery Safety
Information
1,5V x 3
AA (LR6)
In exceptional circumstances,
batteries may leak fluids that
can cause a chemical burn injury
or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always
remove exhausted batteries from
the product. Dispose of batteries
safely. Do not dispose of this
product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries
from the product before charging.
• If removable, rechargeable
batteries are used, they are
only to be charged under
adult supervision.
Care
• The toy is machine washable.
First, remove the sound box
from the toy. Machine wash
cold, on the gentle cycle. Do not
use bleach. Tumble dry low heat.
Do not immerse the sound box.
• Protect the environment
by not disposing of this
product with household
waste (2002/96/EC).
Check your local
authority for recycling
advice and facilities.
ICES-003
This Class B digital apparatus
complies with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe
B est conforme à la norme NMB003 du Canada. L’utilisation de ce
dispositif est autorisée seulement
aux conditions suivantes: (1) il ne
doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage
radioélectrique reçu, même si
ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.

UMER
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
PRINTED IN CHINA BFL65a-0920
©2013 Mattel. All Rights Reserved.