Fisher-Price BBP07 Instruction Sheet

BATTERY INSTALLATION
Unscrew and lift cover away from top of Thomas.
Install battery as indicated inside the battery compartment. For longer life use only alkaline batteries.
Requires 1 “AA” (LR6) battery.
If this toy begins to operate erratically, you may need to reset the electronics. Remove the batteries from the toy and replace it.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire.
The batteries inside may explode or leak.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Required tool:
Phillips screwdriver
1,5V x 1
“AA” (LR6)
II
TM
R
Please keep these instructions for future reference as they contain important information.
What’s Included
W4
BUSTLING
AILWAY
INSTRUCTIONS
E2
S
ET
NOTE: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
• CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME NMB-003
DU CANADA.
• Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
• L’utilisation de ce produit est sujette aux conditions suivantes :
(1) il ne doit pas produire de brouillage et (2) il doit pouvoir tolérer tout brouillage reçu, même si ce brouillage est susceptible de compromettre son fonctionnement.
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada) 1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Based on the Railway Series by The Reverend W Awdry. ©2013 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends and Thomas & Friends are trademarks of Gullane (Thomas) Limited. © HIT Entertainment Limited. HIT and the HIT logo are trademarks of HIT Entertainment Limited.
©2013 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted.
PRINTED IN CHINA.
Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
CAUTION:
To prevent entanglement, keep hair away from wheels.
MAY NOT WORK WITH ALL ENGINES.
Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities .
BBP07
ID. BBP07-0920
S6
T2
S4
T1
Y2
x3x3
S2
x2x2
ADULT ASSEMBLY REQUIRED.
No tools needed.
C1
x 11x 11
S1
Copper Mine Assembly
1
2
Assembly
3
4
Cargo-Flip
Track Position
Track Layout
S4
C1
C1
C1
S1
C1
T1
Item No : BBP07-0920 Version : EL Size : 16.54" x 11.69" (A3) Paper : Woodfree paper 70 gsm Color : Black Date : 3/12/13(Kary)
C1
C1
S4
1
Label Positions
1
5 6
7 8 9
2 3 4
2
Elsbridge Station
10
11 12
3
6
7
12
8
9
Cargo-flip Track Instruction
For best results, point track arrow in
the direction Arthur is travelling and
switch Cargo-Flip Button (located beneath track) UP.
Up
Down
Y2
E2
S2
S4
When button is UP: Cargo car will flip from empty to full and back again.
W4
C1
Up
Down
S2
S4
C1
Down
When button is DOWN: Flip feature is turned off.
C1
S6
C1
C1
Up
Down
Up
13
Signal House
4
10
11
2
1
3
5
13
Copper Mine Instruction
Loading...