Fisher-Price 73974B-0920 User Manual

Creativity System

Creativity System

Creativity System

Creativity System

Owner’s Manual

®

Pixter®Creativity System

Drawing Stylus

Touch Sensitive Screen

Software Port

Insert a software cartridge
(sold separately) into this slot.

Speaker

Stylus Storage

To ol
Menu

2

Contrast Dial

Rotate to make
the image on
the screen
darker
or lighter.

Power Switch

Slide the power
switch to turn the
toy on or off.When
not in use, this toy
automatically turns
off after about
three minutes.

Software Cartridge

Software cartridge not
included (sold separately).

Calibration Hole

(on back of toy)
You must calibrate the
stylus and screen
before first-time use.

Before you begin, take note!

3

•Please keep this manual for future reference,as it contains important
information.

•Adult assembly is required to install batteries.

•Tool needed for battery installation: Phillips screwdriver (not included).

•Requires four “AA” (LR6) alkaline batteries for operation (not included).

• Replace batteries when:

-Display on the screen becomes difficult to see.

-Toy functions erratically.

-Sounds become faint or there are no sounds at all.

• Use only the drawing stylus on the screen. Never use any other object,
such as a regular pen or pencil, on the screen. Markings from regular pens
or pencils cannot be removed and will damage the screen.

•Be sure to turn Pixter®power off before inserting a software cartridge
(sold separately) into the software port. Turn Pixter power back on to play!

IMPORTANT! You must calibrate the stylus to the screen before
first-time use.

• Install four “AA” alkaline batteries. Turn Pixter power on.Wait until you see
the Home Screen.

•Turn Pixter over and locate the calibration hole.

• Insert, push and hold the stylus in the calibration hole. Turn Pixter over so that
you can see the screen. When you see two plus signs remove the stylus
from the calibration hole.

•First touch the upper right corner with the tip of the stylus.

•Then, touch the lower left corner with the tip of the stylus.

Awesome Activities

Touch an activity on the
screen with the stylus.

4

Touch the tool menu Home
Screen with the stylus.

Choose a fun activity from the Home Screen.

Note: If Pixter® seems to be operating erratically (and you have recently
changed the batteries), you may need to reset it. Open the battery
compartment door on the back of the unit. Remove and replace the
batteries. Replace the battery compartment door.

5

Awesome Activities

Freestyle Drawing

Scene Starters

•Use any of the cool tools to
make your own creation:

“Pencil” Tool
Straight Line
Shape Maker
Stamp It

Special Effects Selector

•Touch the arrows on the bottom
of the screen with the stylus to
scroll through choices.

•When you find a scene that you like,
touch the screen with the stylus.

•Use any of the tools to make
the scene!

Face Templates

Connect-the-Dots

•Touch the arrows on the bottom
of the screen with the stylus to
scroll through each funny face.

•When you find a face that
you like, touch the screen
with the stylus.

•Finish the face using any of
the tools.

Hint: When you finish a drawing, you can Erase It (touch ), Full Screen Erase
(touch ), Save It (touch ) or go back to the Home Screen (touch ). Please
refer to the instructions in the Tool Menu section for more details about using
each of these tools.

•Touch the arrows on the bottom
of the screen with the stylus
to scroll through each pattern.
Can you guess what it will be?

•When you find a pattern that you
like, touch the screen with the stylus.

•Connect the dots to see if you
were right!