Fisher-Price 72643, 72644 User Manual
• Adult supervision is required.
• Never use near steps, sloped driveways, hills, roadways,
alleys, swimming pool areas or other bodies of water.
• Always wear shoes or sneakers.
• Never allow more than one rider.
• Observe child weight limit: maximum 55 lbs.
Please keep these instructions for future reference.
Adult assembly is required.
Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood.
If you have any questions about this product, or are missing a part, please call
Fisher-Price®toll-free at 1-800-432-KIDS, rather than return this product to the store.
Age: 2-5 years.
Weight Limit: 55 lbs.
WARNING
Tough Trike
Instructions
Model Numbers: 72643, 72644
Please keep small parts, hardware and plastic bags
out of children’s reach. Dispose of plastic bags properly.
CAUTION
Model Number: 72643
Model Number: 72644
• Please save all packaging material until assembly is complete to ensure that no parts are discarded.
• Wipe each part with a clean dry cloth before assembly.
• If you are missing a part, please call Fisher-Price®toll-free at 1-800-432-KIDS rather than return this product to the store.
(ALL SHOWN ACTUAL SIZE)
#
8 x 5/8" Screw - 6
#
8 x 11/4" Screw - 6
Lock Washer - 2
2
Parts
3
4
6
8
9
11
17
Illustration
Number Part Description Quantity
1Frame 1
2 Rear Wheel 2
3 Rear Wheel Cover 2
4 Rear Axle 1
5 Seat 1
6 Booster Seat 1
7 Tank 1
8Key Console 1
9 Handlebar 1
10 Frame Cover 1
11 Fork 1
12 Fender 1
Illustration
Number Part Description Quantity
13 Front Wheel 1
14 Front Wheel Cover 2
15 Pedal Hub 2
16 Front Axle 1
17 Front Axle Cover 2
18 Pedal 2
19 Lock Washer 2
20 Cap Nut 2
21 #8 x 11/4" Screw 6
22 #8 x 5/8" Screw 6
23 Cap Nut Assembly Tool 3
Label Sheet (not shown) 1
1
7
2
12
14
10
15
16
13
5
22
22
21
18
19
20
22
21
21
Cap Nut - 2
23
IMPORTANT! Remove the cap nut assembly tools from the
rear axle and save them. The cap nut assembly tools will be
used for assembly steps - and then discarded when
the rear wheel assembly is complete.
Axle Holes
Rear Axle
Cap Nut
Cap Nut Assembly Tool
Recessed Side
Cap Nut
Assembly Tool
• Place the other rear wheel onto the rear axle with the
recessed side facing up.
• Place a cap nut into a cap nut assembly tool.
• Place the cap nut with cap nut assembly tool onto the end of
the rear axle and tap with a hammer until secure.
• Remove both cap nut assembly tools and dispose of them
properly.
• Place a rear wheel onto the rear axle with the recessed side
facing down toward the cap nut assembly tool.
• Turn the frame on its side.
• Insert the rear axle through the four axle holes in the rear
of the frame.
3
Assembly
Frame
• Place a scrap block of wood on a flat surface.
• Fit a cap nut into a cap nut assembly tool.
•Insert one end of the rear axle into a cap nut.
•Tap the end of the rear axle with a hammer. Make sure the
cap nut is securely attached to the rear axle.
Scrap Block of Wood
Rear Wheel
Cap Nut
Assembly Tool
Loading...