Page 1
Instructions
Firehouse
Product Number: 72456
Please keep these instructions for future reference.
Adult assembly is required (no tools necessary).
Page 2
• Place the building facade face down on a flat surface.
• Position the 2nd floor so that the bed is toward the building facade
windows.
• Slide and snap the tabs on the 2nd floor into the grooves in the
building facade.
2nd Floor
Building
Facade
Windows
Ta b
Bed
Ta b
Grooves
1
If you have any questions about this product please call Fisher-Price
®
Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD
equipment, please call 1-800-382-7470. Or, write to: Fisher-Price
®
Consumer Affairs, 636 Girard Avenue, East Aurora, New York 14052.
Consumer Information
Assembly
2
Page 3
• Place the base on a flat surface.
• Insert and snap the tabs on the bottom of the building facade and the
end of the fire pole into the slots and hole in the base.
• Remove the twist-tie from around the fire pole. Dispose of the twist-tie
properly.
3
Fire Pole
Remove
Twist-tie
Ta b
Ta b
Slots
Hole
Base
Building
Facade
• Fit one of the pegs on the ladder into one of the holes in the tab
extending from the 2nd floor.
• Insert and snap the other peg on the ladder into the other hole in the
tab extending from the 2nd floor.
Ladder
Pegs
Hole
Hole
Ta b
2nd
Floor
Building
Facade
2
3
Page 4
• Make sure the areas where the labels will be applied are clean and dry.
• Apply the labels as indicated in the illustrations.
• For best adhesion, avoid applying the labels more than once.
One time assembly is now complete.
©1997 Fisher-Price, Inc., East Aurora, New York 14052 72456 1 72456-0920
4
5
1
6
7
8
9
10
11
12
13
2
3
4
5
In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01734 770488.
In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to:
Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne, Victoria 3207.
Printed in Hong Kong.
Loading...