• Open the fastener flap on
the back of the toy.
• Loosen the screw in the
battery compartment door
with a Phillips screwdriver.
• Lift to open the battery
compartment door.
• Insert three, size “AAA”
(LR03) alkaline batteries as
indicated inside the battery
compartment.
• Replace the battery
compartment door and
tighten the screw with a
Phillips screwdriver.
Do not over-tighten.
• Close the fastener flap.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from this toy. Battery leakage and corrosion can
cause damage. Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
“Battery Replacement” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use a
damaged battery charger until it has been properly repaired.
Battery Replacement
Note: For best performance, we
suggest replacing the batteries in
this toy with alkaline batteries upon
purchase. Use alkaline batteries for
longer battery life.
Fastener Flap
Light and
Sound Box
Volume Switch
1.5V x 3
“AAA” (LR03)
SHOWN ACTUAL SIZE