Fisher Price 71924T, 71924R Product Brochure

Car Seat Dashboard

with Remote Control

Model Number 71924

WARNING

Please save these instructions for future reference.

Batteries must be installed by an adult.

Requires one 9 volt (6LR61) and three “AA” (LR6) alkaline batteries (not included).

Tool required for battery installation: Phillips Screwdriver (not included).

To prevent strangulation, never place product in a crib or playpen where baby could become entangled. NEVER add strings or ties to the product.

Battery Compartment

Dashboard

Cover

Battery Installation

Battery Tips

Hint: We recommend the use of alkaline batteries for longer battery life.

(6LR61)

1.5V X 3

“AA” (LR6)

SHOWN

ACTUAL SIZE

SHOWN ACTUAL SIZE

Battery Compartment

Remote Control

Dashboard

• Turn the dashboard face down. Open the fasteners on the cover to locate the battery compartment on the dashboard.

• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

• Insert three “AA” (LR6) alkaline batteries as indicated inside the battery compartment.

• Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

Remote Control

• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

• Snap the contacts of a 9V (6LR61) alkaline battery to the contacts inside the battery compartment.

• Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

Set-Up

• Slide the power/volume control switch on to low volume .

• Press the horn on the dashboard to activate the system. The lights will twinkle. The system will be on for approximately two hours.

• Press the horn again to hear a soothing lullaby or entertaining song. Adjust the volume to a comfortable listening level for your child by either:

- keeping the switch on low volume .

- sliding the switch to high volume .

Hint: Although the system is on, unless the toy is playing music or sound effects and lights are twinkling, only a very small amount of power is being used from the batteries.

• Re-fasten the fasteners on the cover.

Press horn to activate system.

Power/ Volume Control Switch

• Do not mix old and new batteries.

• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Remove the batteries during long periods of non-use. Always remove exhausted batteries from the toy and remote. Battery leakage and corrosion can damage this toy. Dispose of batteries safely.

• Never short circuit the battery terminals.

• Non-rechargeable batteries are not to be recharged.

• Only batteries of the same or equivalent type as recommended in the Battery Installation instructions are to be used.

• If removable rechargeable batteries are used, they are only to be charged under adult supervision.

• Rechargeable batteries are to be removed from the toy before they are charged.

• If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired.

+ 4 hidden pages