Page 1
™
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires three “C” batteries (included).
Tool required for battery installation:
Phillips screwdriver (not included).
Product Number: 71923
Page 2
1.5V x 3
“C” (LR14)
SHOWN ACTUAL SIZE
• Locate the battery compar tment on the underside of the base.
• Loosen the screw in the battery compartment
cover with a Phillips screwdriver and remove
the cover.
• Insert three “C” (LR14) alkaline batteries in the
battery compar tment as shown.
Hint: We recommend use of alkaline batteries
for longer battery life.
• Replace the battery compar tment cover and
tighten the screw with a Phillips screwdriver.
For best performance, we recommend replacing the batteries that came with this toy with
three, new "C" (LR14) alkaline batteries.
Battery Replacement
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long periods of
non-use. Always remove exhausted batteries
from the toy.Battery leakage and corrosion can
damage this toy.Dispose of batteries safely.
• Do not dispose of batteries in a fire.The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to
be recharged.
• Only batteries of the same or equivalent type
as recommended in the Battery Replacement
instructions are to be used.
• If removable rechargeable batteries are
used, they are only to be charged under
adult supervision.
• Rechargeable batteries are to be removed from
the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the cord, plug,
enclosure and other parts. Do not use
a damaged battery charger until it has been
properly repaired.
Battery
Compartment
Base
2
Page 3
• Position the base upside down on a flat surface
with the straight edge of the base facing you.
• Position the playmat upside down with the
straight edge of the playmat facing the base.
• Fit the three button holes in the playmat onto
the corresponding buttons on the base.
• Insert and snap the tabs on the rainbow backboard into the slots in the base.
• Insert and snap the flowers into the the base.
• Fit one of the the pegs at the center of the
block rocker into a hole in the base. Press to
snap the other peg on the block rocker into
the hole in the base.
Assembly is now complete.
Assembly
3
3
3
1
1
2
2
• Insert the fastener at one end of the playmat
under and around the tab on the base and
secure it.
• Repeat this procedure to attach and secure the
fastener on the opposite side of the playmat.
• Turn the base and playmat assembly upright.
Tab
Fastener
Playmat
Base
• Stack the blocks on any of the pegs on the base.
• Press the “magic-action” button on the base to
bring a colorful activity “garden” to life with sound,
lights and lots of twirling fun!
Note: If T wirlin’Whirlin’ Garden™does not respond
when the “magic action” button is pressed, it’s time
to replace the batteries!
“Magic-Action”
Button
Blocks
Blocks
It’s Playtime!
Playmat
Buttons
Holes
Base
Rainbow
Backboard
Flowers
Block
Rocker
Base
Bottom View
Bottom View
Page 4
• To clean, remove the playmat from the base.
Wipe all plastic parts of this toy with a clean
cloth dampened with a mild soap and water
solution. Never immerse the base.
• Handwash the playmat using a mild detergent.
Do not bleach. Rinse clean and line dry.
• This toy has no consumer serviceable parts.
Do not take the base apart.
• The playmat easily folds and the base has a
carry handle for take-along fun! Place the blocks
on the playmat and fold the playmat toward the
base.
• Fasten the hook-and-loop fasteners on the sides
of the playmat and you’re ready to go!
Take-Along Fun!
Care
Consumer Information
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
Gr
eat Britain: telephone 01628 500303.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Questions? We'd like to hear from you!
Call Fisher-Price
®
Consumer Relations, toll-free at
1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or, write to: Fisher-Pr ice
®
Consumer Relations, 636 Girard
Avenue, East Aurora, New York 14052.
FCC Statement
(United States Only)
Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications.However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:Changes or modifications not
expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Playmat
Base
Fasteners
Printed in China 71923b-0920
Loading...