Fisher-Price 71879 Instruction Sheet

Model Number: 71879, 71899

Please save these instructions for future reference.

Tool needed for assembly: Phillips screwdriver (not included).

This product requires three, size “AA” (LR6) alkaline batteries (not included).

If you experience a problem with this toy, or are missing a part,

please call us at 1-800-432-KIDS rather than return this toy to the store.

INSTRUCTIONS

Column A

Microphone

Curtain

Curtain with String

Center Arch

Arch BArch A

Post

Knobbed Post

Threshold

Base B

Base A

Clock Hour Hand

Clock Minute Hand

Counter Top A

4 Tickets

Counter Top B

Column B

Part not shown: label sheet.

Before beginning assembly:

• Please wipe each part with a clean, dry cloth.

• Use a cool iron to remove wrinkles in the curtains.

BOTH SHOWN ACTUAL SIZE

#8 x 1/2” Screw - 18

#10 x 3/4” Screw - 1

CAUTION

This package contains small parts.

Adult assembly is required.

• Position counter top A (there is a A on the underside) upside down on a flat surface.

• Turn column A (there is a A on the underside) upside down and fit it to counter top A.

• Insert four 1/2" screws through the tabs on column A and into the pegs on the counter top A.Tighten the screws with a Phillips screwdriver. Do not over-tighten.

• Turn column A assembly upright.

• Wash your hands before applying the clock label.

• Make sure the area where the label will be applied is clean and dry.

• For best results, do not attempt to apply the label more than once.

• Align the notch in the clock label with the raised tab on column A assembly.

• Apply the clock label as shown above.

• Insert the peg on the hour hand into the hole in the clock face.

• Insert the peg on the minute hand through the hole in the hour hand and into the hole in the clock face.

• From behind column A assembly, insert the

/4" screw through column A and the hour hand, and into the minute hand.Tighten the screw with a Phillips screwdriver. Do not over-tighten.

Column A

Counter Top A

Column B

Counter Top B

• Position counter top B upside down on a flat surface.

• Turn column B upside down and fit it to the counter top B.

• Insert four 1/2" screws through the tabs on column B and into the pegs on counter top B.Tighten the screws with a Phillips screwdriver. Do not over-tighten.

Column A Assembly

Clock Label

Notch

Raised Tab

Clock Face

Minute Hand

Hour Hand

+ 5 hidden pages