Page 1
71664
Please keep these instructions for future reference.
Requires three “AA” batteries (included) for operation.
Batteries included are for demonstration purposes only.
Adult assembly is required for battery replacement.
Tool needed for battery replacement: Phillips screwdriver (not included).
www.fisher-price.com
Page 2
Battery Replacement
Battery
Compartment
Door
1.5V x 3
“AA” (LR6)
For best performance, we recommend replacing the batteries that came with this
toy with three, new "AA" (LR6) alkaline batteries.
• Loosen the screw in the battery compartment door with a Phillips screwdriver.
• Remove the battery compartment door. Remove the exhausted batteries and throw
them away.
• Insert three “AA” (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.
• If this toy begins to operate erratically, you may need to reset the electronics. Slide
the power/mode switch OFF and then back ON.
• When sounds or lights from this toy become faint or stop working, it's time for an
adult to replace the batteries!
Volume Switch
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of product in
a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Page 3
Let's Listen and Learn
Number/Shape
Buttons
Power/Mode
Switch
Letter/Color
Buttons
• Slide the power/mode switch to number and letters mode or colors and
shapes mode.
• Slide the volume switch to high volume or low volume .
• Press any of the buttons to hear it identified along with a short tune and
dancing lights.
• Spin the roller for a musical tune and flashing lights.
• When finished playing with this toy, slide the power/mode switch OFF.
Number/Shape
Buttons
Roller
Care
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do
not immerse this toy.
• This toy has no consumer serviceable parts. Please do not take this toy apart.
Page 4
FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept any interference received, including interference that
may cause undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est sus-
ceptible de compromettre le fonctionnement du dispositif.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2008 Mattel, Inc. All Right Reserved. ® and ™ designate
U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA 71664a-0920
Loading...