Fisher & Paykel OB60SL11DEPB2 Installation Guide
BUILT-IN OVEN
OB60SL models
INSTALLATION GUIDE
NZ AU GB IE
590477C 04.18
1 SAFETY AND WARNINGS
!
WARNING!
Electrical shock hazard
Disconnect the appliance from the mains
electricity supply before carrying out any work
or maintenance on it.
Connection to a good earth wiring system is
essential and mandatory.
Alterations to the domestic wiring system must
only be made by a qualified electrician.
Failure to follow this advice may result in
electrical shock or death.
!
WARNING!
Cut Hazard
Take care - panel edges are sharp.
Failure to use caution could result in injury or
cuts.
IMPORTANT SAFETY INSTRUCTIONS
z
Particular attention shall be given to the relevant
requirements regarding ventilation.
z
Read these instructions carefully before installing this
product.
z
Please make this information available to the person
installing the appliance as it could reduce your
installation costs.
z
This appliance is to be installed and serviced only by
an authorised person.
!
WARNING!
Fire hazard
Do not use adapters, reducers, or branching
devices to connect this appliance to the mains
power supply.
Failure to follow this advice may result in
overheating, burning, or fire.
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our
website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.
1
1 SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
z
Installation must comply with your local building and
local electricity regulations.
z
The manufacturer accepts no responsibility for
the incorrect installation of appliances. Incorrect
installation may result in personal injury, damage to
property and may invalidate any warranty or liability
claims.
z
Do not modify this appliance.
z
Do not use or store flammable materials on or near this
appliance.
z
Packing elements (eg plastic bags, polystyrene foam,
staples, packing straps etc) and tools should not be left
around during and after installation, especially if they
are within easy reach of children, as these may cause
serious injuries.
z
If the power supply cable is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
z
Isolating switch: make sure this oven is connected to a
circuit which incorporates an isolating switch providing
full disconnection from the power supply in accordance
with the wiring rules.
z
The oven must be earthed.
z
Do not use adaptors, reducers or branching devices
to connect the oven to the mains electricity supply, as
they can cause overheating and burning.
z
The appliance must not be installed behind a
decorative door in order to avoid overheating.
2
Loading...