Fisher & Paykel Aerotech oven OB76SDEPX, OB76SD Quick Start Manual

Fan
Bake

Fan

Forced

Classic
Bake

Fan
Grill

Maxi
Grill

YOUR OVEN

OB76SDEPX

SETTING THE CLOCK

THE CONTROL PANEL

Keep this document handy for easy reference.

For detailed information on the other features of your oven, see your ‘User guide’.
Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’
booklet.

NZ AU

QUICK START GUIDE

Aerotech oven

1

Control panel

2

Oven vent louvres

3

Oven light

4

Telescopic sliding shelf (x3)

5

Side rack

6

Oven door and handle

7

Oven seal

Accessories:

8

Meat probe

9

Flat baking tray

10

Rack

11

Grid

12

Pan

8

9

10

11

12

2

3

4

5

7

6

1

You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel

button to exit the clock setting.

If you want to set the clock later, follow the steps under ‘To change the time’.

To change the time

(within the user preference menu)

When the oven is first switched on at the wall

Locking the control panel

To lock, press and hold the select

button until the control lock indicator

comes on.

To unlock, press and hold the

cancel

button until the

indicator

flashes and then goes out.

Function indicators

(see ‘Oven functions’)

Function dial Temperature

indicator

Temperature

dial

Function halo

Temperature

halo

Control lock indicator (see
‘Locking the control panel’)

if lit:
Control panel is locked

Timer indicator
(see ‘Using the
timer’)

if lit:
Timer is
counting down

Close door indicator

if lit:
Door is open when oven is
on (some functions only).
See ‘Troubleshooting’ in
your User guide.

Cooking time indicator (see ‘Automatic cooking’) in User guide

if lit:
Automatic cooking time is set

Meat probe indicator
(see ‘Using the meat probe’) in User guide

if lit:
Meat probe is in use
(display will alternate between probe set
temperature and internal temperature
of the meat)

Stop time indicator
(see ‘Automatic cooking’) in User guide

if lit:
Automatic stop time is set

Display

Scroll Select Cancel

1

Press and hold the left and right scroll

buttons together for 3 seconds

to enter the user preference menu.
The display will either show 12 Hror 24

Hr

2

Press the select

button to confirm.

The display will flash.

3

Follow steps 2-5 left to set the time.

At step 2a, you also now have the
ability to scroll between

24 Hr,

12 Hr and OFF (turns the display off).

Refer to the User guide to learn more

about this feature.

3

Press the left and right scroll
buttons to set the time.

1

The display will flash 24 Hr.

4

Press the select

button to

confirm.

2a

Press the right scroll button to scroll
between

24 Hrand 12 Hr

2b

Press the select

button to confirm.

continued over

There will be a distinctive smell and a small amount of smoke during the conditioning of the oven.

This is normal, but make sure the kitchen is well ventilated during the conditioning.

Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.

It is important to condition your oven before using it for cooking and baking. Conditioning will burn off any manufacturing residues and ensure

that you get the best results right from the start.

1

Make sure you have removed any packaging and any cable ties used to secure the shelving during transit.

2

Make sure you have set the clock.

3

Make sure all the shelves are fitted.

CONDITION THE OVEN

NOITCNUF

ERUTAREPMET

7

Leave the temperature at 200 oC
for 5 minutes.
The halo will remain white.

8

When you have finished, turn the function dial to

Off

. The halos will go out.

NOITCNUF NOITCNUF

Aero
Grill

ERUTAREPMET ERUTAREPMET

4

Select the Bake function.
The halo will glow white.
Each function has a preset
temperature and so the oven
will start heating at the Bake
preset temperature of 180

o

C.

5

Set the temperature to 200 oC for 30 minutes.
While the oven is heating up, the temperature halo
will glow red and the temperature indicator will
alternately show the actual and set temperatures.
When the oven has reached set temperature, a tone
will sound and the halo will turn white.

6

After 30 minutes is up,

select the Fan Grill

function.

USING THE TIMER

FOR MORE INFO

REPOSITIONING THE SHELVES

Placing the telescopic sliding shelves on the side racks provides EIGHT cooking
positions to choose from. Refer to the User guide for suggested shelf positions.

Note: generally, the shelf positions in the top of the oven are suitable for grilling.
Those in the middle or lower region of the oven are suitable for baking, roasting and casseroles.

Always position oven shelves BEFORE heating the oven.
To remove a sliding shelf, grip it by its two front corners (making sure you are gripping the wire shelf and the
sliding frame together), tilt upwards and pull it out of the oven.
To place a sliding shelf in the oven correctly, position it so that the front bar is toward you, as shown.
Check that the sliding frame is not extended.
Check the guard rail (as shown) to make sure the shelf is the right way up.
Position the shelf so that it is level and the rear shelf tags on both sides of the sliding frame rest on the side racks
(as shown).
Then push the sliding shelf all the way to the back of the oven, until the front shelf tags drop into place.
For your safety, the wire shelves and telescopic sliding frames are built together as one unit and are not
separable. This means that when placed properly on the side racks, the slides will prevent the wire shelves from
tilting when pulled towards you.
To prevent the tags from lifting off the side racks, take care to slide the shelves forward horizontally.

Shelf positions

1

Select the timer by pressing
the right scroll

button once.
The timer indicator will appear
and the colon will flash.

2

Press the select

button to
confirm.
The display will flash to indicate
the timer is ready to be set.

3

Set the time by pressing the
scroll

buttons.
Holding the buttons down
will speed up the scrolling.

4

Press the select

button to
confirm.
The timer will then begin to
count down.
If you want to check the time
of day, press the cancel
button once.

Press the right scroll

button

to scroll back to the timer.

You can use the timer at any time, even if you are not using the oven.
If the time is more than an hour, the display will count down in minutes (hr:min). If it is less than an hour, it will count down in seconds (min:sec).
You can set the timer for up to 23 hours 59 minutes.

Important!

The timer does NOT turn the oven off.

To modify the timer setting

1

Make sure the display shows the remaining time counting down.

2

Press the select

button.

3

Press the scroll buttons to set a new time.

4

Press the select

button to confirm.

To cancel the timer setting

1

Make sure the display shows the remaining time counting down.

2

Press the cancel button until the display shows the time of day and the timer indicator disappears.

When the set time is up

The display will show 0:00 and a tone will sound every 15 seconds.
Press any button to stop the tone sounding. The display will revert to showing the time of day.

For detailed information on the
other features of your oven

For warranty information

If you…

have any questions or comments
need a Fisher & Paykel authorized
technician to service your product
need replacement parts or accessories
want to register your product

see your ‘User guide’

see your ‘Service and warranty’ booklet

see your ‘Service and warranty’ booklet or contact us
NZ toll-free, 24/7 0800 372 273

AU toll-free, 24/7 1300 650 590

www.fisherpaykel.com

590577A 07.13

1

2

3

4

5

6

7

8

Side rack

Side rack

Mounting

slots

Retaining wire

Lock
stud

Wire shelf

Front bar

Sliding frame

(push fully into place)

Shelf tag

Guard rail