Fisher & Paykel ACTIVESMART RS9120W, ACTIVESMART RS36A80, ACTIVESMART RS36A80J Installation Manual

ACTIVESMART™ INTEGRATED

DOOR/DRAWER REFRIGERATOR

RS9120W models

INSTALLATION GUIDE

NZ AU GB IE HK SG IN

846806C 07.18

1

FOLLOW THE INSTALLATION SEQUENCE RELEVANT TO YOUR CABINETRY

1 SAFETY AND WARNINGS

2 COMPONENTS LIST

3 PRODUCT AND CAVITY DIMENSIONS

4 CABINETRY OPTIONS

5 STAINLESS STEEL DOOR PANEL AND TOE KICK DIMENSIONS

6 CUSTOM DOOR PANEL AND TOE KICK DIMENSIONS

7 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS

8

 DOOR OPENING ROTATION

9

ELECTRICAL AND PLUMBING

!0 BEFORE INSTALLATION

!1 ATTACH ANTI-TIP BRACKET

!2 ATTACH TOP TRIM – FOR 2134mm CAVITY

!3 ATTACH SIDE BRACKETS AND DOOR STUDS

!4 CONNECT TO WATER AND ELECTRICAL SUPPLY

!5 ALIGN YOUR PRODUCT INSIDE CABINETRY

!6 INSTALL WATER FILTER CARTRIDGE AND TOE KICK

!7 ASSEMBLE DOOR PANEL SET

!8 HANG ICE & WATER DOOR PANEL

!9 HANG NON-WATER DISPENSING DOOR PANELS

@0 ATTACH FIXING BRACKETS

@1 ATTACH COVERS

@2 ATTACH TOE KICK

@3 ATTACH BOTTOM TOE KICK

@6 ADJUST HINGE TENSIONING SCREWS

@7 FINAL CHECKLIST

OR

@4 ATTACH SIDE TRIM BRACKETS –

[A] FLEXIBLE SPRING CLIP METHOD

@5 ATTACH SIDE TRIM BRACKETS –

[B] FIXED SCREW METHOD

CONTENTS

3

!

WARNING!

Electric Shock Hazard
Read and follow the safety and warnings outlined in this installation
guide before operating this refrigerator.
Failure to do so can result in death, electric shock, fire or injury
topersons.

!

WARNING!

Cut Hazard
Take care – panel edges are sharp. Failure to use caution could result in
injury or cuts.

!

WARNING!

This refrigerator is top-heavy and must be secured to prevent the
possibility of tippingforward.

To ensure that the refrigerator is stable under all loading conditions,
theanti-tip bracket and fittings supplied must be installed according
tothe following installation instructions by a professional installer.

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country,
go to our websitefisherpaykel.com or contact your local Fisher & Paykel dealer.

IMPORTANT!



The water connection to your Ice & water refrigerator must be installed by an
authorised plumber or Fisher & Paykel trained and supported service technician
andcomply with all state and local laws.



Installation and use MUST comply with all state and local plumbing codes. Checkwith
your local public works department for plumbing codes. You must follow their
guidelines as you install the water filtration system.



To avoid serious illness or death, only connect your water filter to safe drinking water.



The water filter cartridge needs to be changed when the replacement indicator icon
illuminates. This will happen every 6 months.



If the water filtration system has been allowed to freeze, replace filter cartridge.
Failure to replace the disposable filter at recommended intervals may lead to reduced
filter performance and failure of the filter, causing property damage from water
leakage or flooding.



In cases of excessively reduced filter life — we recommend that you consult a local
plumber or your water supplier for advice on suitable filtration requirements for the
water supplied to your home.



Filter replacement is the consumer’s responsibility and will not be covered by the
warranty except in the case of faulty parts or materials within the filter cartridge.



If the water has not created ice for some time or ice has an unpleasant taste or odour
dispose of ice and refer to the flushing instructions detailed in the installation section
of this user guide/installation guide. If unpleasant taste or odor persists, you may wish
to fit a new filter cartridge.



Use new tubing supplied with the refrigerator. DO NOT reuse old tubing from old
water and ice connections.



Your water filtration system can withstand up to 120psi (827kPa) of water pressure.
Ensure the supplied pressure reducing valve is installed before installing the water
filtration system. DO NOT install if water pressure exceeds 120psi (827kPa).

To reduce the risk associated with property damage due to water leakage or flooding:



DO NOT install systems in areas where ambient temperatures may go above 100°F
(38°C) or drop below 33°F (0.6°C).



DO NOT install on hot water supply lines. The maximum operating water temperature
of this filter system is 100°F (38°C).



DO NOT install where water hammer conditions may occur. If water hammer
conditions exist, you must install a water hammer arrester.

WARNING!

To reduce the risk associated with choking:



DO NOT allow children under 3 years of age to have access to small parts during the
installation of the water filter.

1 SAFETY AND WARNINGS

4

Product accessories — included with the refrigerator

Toe kick filter (1x) Top toe kick grille (1x) Bottom toe kick grille (1x) Stainless steel

toe kick (1x)

Door side trim (2x) Drawer top trim (1x) Drawer side trim (2x)

Cabinet side trim (2x) Cabinet side

trim bracket (6x)

Cabinet top trim (1x) Cabinet top trim

joiningbracket (2x)

Air divider (1x) Screw cover (4x) Allen key (1x)

Fixing bracket (4x) Side base bracket (2x) Top cover (2x) Side cover (4x) 3M Dual Lock™

tabs(10x)

#8x16 panhead
Phillipsscrew (34x)

#8x19 twin thread
screw(8)

M5 nut (4x) M5x8 pan head

Phillipsscrew (4x)

M5x8 countersunk
Phillipsscrew (12x)

Hinge limiting
pin (1x)

MI (miscellaneous items) pack — included with the refrigerator

USER GUIDE

NZ AU GB IE HK SG IN US

ACTIVESMART™

INTEGRATED REFRIGERATOR

RS90A, RS9120W,

RS36A72, RS36A80 & RS36W80 models

SERVICE & WARRANTY

SERVICE ET GARANTIE

ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ

SERVIZIO E GARANZIA

SERVICE & GARANTIE

HUOLTO JA TAKUU

SERVICE OG GARANTI

保修和维修

服務和保修

ACTIVESMART™ INTEGRATED

DOOR/DRAWER REFRIGERATOR

RS9120W models

INSTALLATION GUIDE

NZ AU GB IE HK SG IN

846806C 06.18

User guide (1x) Service & Warranty (1x) Installation guide (1x)

Anti-tip bracket fittings — included with the refrigerator

Anti-tip bracket (1x) #10x40 pan head

Phillipsscrew (4x)

Masonry plug (4x)

2 COMPONENTS LIST

5

Water fittings —  included with the refrigerator

Water filter (1x) Collet locking clip (1x) Tap adaptor (1x)

Filter cartridge tool (1x) External display module

(1x) (included with water
dispensing model)

1/4” (6mm) tube (1x)

Door handle kit — not included with the refrigerator and must be purchased separately

Professional round handle (2x)

OR

Contemporary square handle (2x)

M5x25 pan head socket screw (8x) M5x14 Mush Phillips SS (34x)

Door panel fittings — included with the refrigerator

Door hanging bracket (1x) Drawer hanging bracket (1x) Side bracket (6x)

Side strap (10x) M5x10 pan head

Phillipsscrew (10x)

#8x16 mush washer
screw (35x) (for Side trim

attachment: Fixed screw
method only (12x))

M8 stud (5x) M8 washer (4x) M8 nut (4x) Locking bracket (1x)

Door panel set

Door panel set:

Ice & Water panel (1x)
Drawer panel (1x)

Model numbers:

RD9121W(L/R), RD9121WRU

Door panel set:

Non-Water dispensing door panel (1x)
Drawer panel (1x)

Fisher & Paykel
(Stainless steel)
door panel set is
not included with
the refrigerator
and must be
purchased
separately.

Custom door
panel set is
only applicable
for non-Water
dispensingmodels.
Customers can
supply their own
Custom door panel
to match their
cabinetry.

2 COMPONENTS LIST

6

PRODUCT DIMENSIONS mm

A

Overall height of product* 2130

B

Overall width of product 906

c

Overall depth of product (without door panels) 606

*

Includes mounted feet

CAVITY DIMENSIONS mm

D

Overall height of cavity (for refrigerator using RD9120 door panel set)** 2032

e

Overall height of cavity (for refrigerator using RD9121 door panel set)** 2134

f

Overall width of cavity 914

g

Overall depth of cavity (for flush installation) 635

H

Overall depth of cavity (for proud installation) 629

i

Minimum cabinetry gap clearance from edge of product 4

j

Minimum required finished return (side and top cavity) min. 127

** Supplied top trim enables cavity height to be either 2032mm or 2134mm.
*** Assumes a door panel thickness of 19mm.

For integrated installation, ensure finished return dimensions are as shown.

PROFILE VIEWFRONT VIEW

b

f

h

a

g

h

d

c

e

PLAN VIEW

i

IMPORTANT!

For ease of installation, ensure cavity width is consistent
top to bottom and height isconsistent left to right.

Note: image shows custom panel flushed
with edge of cabinetry

j

i

3 PRODUCT AND CAVITY DIMENSIONS

7

FRAMELESS CABINETRY

(Frameless: Aligns the product with the cabinetry)

FRAMED CABINETRY

(Framed: Aligns the product with the frame of the cabinetry)

Frameless

Framed

Proud

installation

Flush

installation

4 CABINETRY OPTIONS

8

RD3680 RD3684

DOOR PANEL SETS DIMENSIONS mm mm

a

Height of top door panel 1150 1252

b

Height of bottom drawer panel 772 772

c

Depth of product front panels (excluding handles) 19 19

Note:



Optional Fisher & Paykel Stainless steel front panels. Model no. RD3684 / RD3680 (non-Water dispensing model) and
modelno.RD3684U / RD3684U (Ice & Water model).

TOE KICK PANEL DIMENSIONS mm

d

Height of toe kick panel 102

e

Depth of toe kick (measured from front of door panels) 120

Note:



Stainless steel toe kick, height 102mm is supplied with the refrigerator. For integrated installation,
customers can supply their own toe kick, height 102 – 152mm.



The bottom grille can be reduced to allow for a higher eg 152mm toe kick. Adjust the height of the
bottom drawer panel accordingly.

RD3680 DOOR PANEL SET

c

D

b

a

b

D

d

a a

b

RD3684 DOOR PANEL SET

c

b

D

d

a

a

b

b

a

d

e

c

5 STAINLESS STEEL DOOR PANEL AND TOE KICK DIMENSIONS

9

Note: top trim supplied for
2134mm installation

ISO VIEW

CUSTOM PANEL DIMENSIONS mm

A

Height of top door panel 1150 – 1252

B

Width of top door and bottom drawer panel 906

C

Height of bottom drawer panel 722 – 772

D

Height from bottom of product to top of bottom drawerpanel 874

E

Gap between top door panel and bottom drawer panel 4

F

Height of toe kick panel* 102 – 152

G

Depth of custom panels 16 – 25

Maximum weight of top door panel

(with handles) 20kg

Maximum weight of bottom drawer panel

(with handles) 11kg

Custom door panels to be manufactured and fitted by cabinetmaker.

Door handle kit is available as an optional accessory.

* Stainless steel toe kick, height 102mm is supplied with the refrigerator. For integrated installation, a custom toe kick

102 – 152mm can be manufactured and fitted by cabinetmaker. The bottom grille can be reduced to allow for a higher
toekick. Adjustthe height of the bottom drawer panel accordingly.

RS9120WJ models shown only.
When designing custom door panels, these
are only available for Automatic ice models.

PROFILE VIEW

c

e

A

d

CUSTOM PANEL DIMENSIONS

Note: Top trim supplied for

84" installation

f

D

A

B

c

e

A

d

e

g

c

6 CUSTOM DOOR PANEL AND TOE KICK DIMENSIONS