This manual explains how to safely operate the VPC-C6EX, VPC-C6EXE,
VPC-C6E and VPC-C6.
Any information regarding only one of these products will be labeled as such.
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “
Keep this manual in a safe place for later reference.
SAFETY MANUAL”.
Warning
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of
California (USA):
WARNING:
This product contains chemicals, including lead, known to the State of
California to cause cancer, birth defects or other reproductive harm. Wash
hands after handling.
i This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
h Reorient or relocate the receiving antenna.
h Increase the separation between the equipment and receiver.
h Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
h Consult the dealer or an experienced radio/TV technician for help.
i Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Declaration of Conformity
Model number: VPC-C6
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
iEnglish
FOR CANADIAN USERS
i This Class B digital apparatus complies with Canadian ICES-003.
FOR EU USERS
Note:
i This symbol mark and recycle system apply only to EU
countries and do not apply to countries in other areas of
the world.
Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
Symbols used in this manual
HINT Points giving some extended instructions or special points to pay
CAUTION Points that require special attention.
(page xx) Refer to the page indicated for detailed information.
You may find the answers to questions or problems concerning camera
operation in the sections “COMMONLY ASKED QUESTIONS” (page 155)
and “TROUBLESHOOTING” (page 162).
attention to.
Englishii
GETTING UP AND RUNNING
Install the card
1 Insert the card.
2 Connect the AC adaptor to the camera.
iiiEnglish
Shooting
kkkkVideo clip recording
1 Open the monitor unit, and
press the ON/OFF button
for at least 1 second to turn
the camera on.
2 Set the main switch to REC.
3 Press the video clip
recording button [].
h Recording begins.
h To stop recording, press
the video clip recording
Englishiv
Playback
kkkkVideo clip playback
1
Set the main switch to PLAY.
h The display switches to the
Playback Screen.
h Toggle the SET button to
the left or right to display the
video clip you wish to play
back.
h Video clips are indicated by
a video clip pattern along
the top and bottom of the
screen.
2 Press the SET button.
h Playback of the selected
video clip begins.
h When the main switch is
moved to REC, the display
changes to the Shooting
Screen.
kkkkStill image playback
1
Set the main switch to PLAY.
h The display switches to the
Playback Screen.
h To view other images,
toggle the SET button to the
left or right.
h When the main switch is
moved to REC, the display
changes to the Shooting
Screen.
Main switch
SET button
<Example: After recording
a video clip>
Video clip pattern
When you are finished using the camera...
Press the ON/OFF button to turn the camera off.
vEnglish
QUICK SEARCH BY OPERATION
Your camera has an abundance of convenient features and functions. From
creating precisely the photo you want, to viewing images using various
techniques, you can locate the exact operation for your purposes in the
following table.
Basic operation
Getting started
shooting/recording
•“Recording video clips”
on page 34
•“Capturing still images”
on page 36
•“Shoot a still image
while recording a video
clip” on page 38
•“MAKE AN AUDIO
RECORDING” on
page 41
Shooting/recording
Optimize the photo
quality
•“Video clip mode
(image quality) setting”
on page 55
•“Still image mode
(resolution) setting” on
page 56
Convenient
functions
Log the date and
time of your photos
•“DATE AND TIME
SETTING” on page 107
Zoom in on the
subject
•“Using the zoom” on
page 39
Take vertical
(portrait) format
photos
•“Still image mode
(resolution) setting” on
page 56
Close-up
photography
•“FOCUS RANGE”
(super macro mode) on
page 66
Reduce video clip flicker
•“FLICKER-REDUCTION” on page 117
Set the camera’s color/contrast
characteristics
•“ADJUST THE IMAGE QUALITY” on page 116
Additional functions
For more accurate
focus
•“FOCUS RANGE”
(manual focus) page 66
Set the focus to a
narrow range
•“FOCUS AREA
SETTING” on page 68
1English
Basic operation
Capture fast-moving subjects
•“SCENE SELECT” (sports mode) on page 57
Shoot in dark conditions
•“Exposure correction” on page 40
•“FLASH SETTING” on page 60
•“SCENE SELECT” (night view mode/fireworks mode/lamp mode) on page 57
Photographing people
•“SCENE SELECT” (por trait mode/night view mode) on page 57
•“FILTERS” (cosmetic filter) on page 59
Photographing landscapes
•“SCENE SELECT” (landscape mode) on page 57
Take a self-photo
•“SELF-TIMER” on page 62
Shooting/recording
Convenient
functions
Increase the camera’s sensitivity
•“ISO SENSITIVITY” on page 70
Make images lighter
or darker
•“Exposure correction”
on page 40
Change the color of
the images
•“FILTERS”
(monochrome filter/
sepia filter) on page 59
Additional functions
Measure the
brightness of a
specific area
•“LIGHT-MEASURING
MODE SETTING” on
page 69
Adjust the camera’s
sensitivity
•“ISO SENSITIVITY” on
page 70
Make white appear
natural
•“WHITE BALANCE” on
page 71
English2
QUICK SEARCH BY OPERATION
Basic operation
Getting started
viewing images
•“Playing back a video
clip” on page 46
•“VIEWING IMAGES” on
page 43
•“PLAYING BACK
Playback
AUD IO DATA” on
page 48
Slideshow playback
•“PLAYBACK MODE” on page 77
Adjust the LCD monitor brightness
•“LCD MONITOR BRIGHTNESS” on page 119
Playback on a TV
•“CONNECTING TO A TV” on page 137
Search for image/audio data
•“9-image display playback” on page 44
Delete data
•“ERASING DATA” on
page 81
Edit the red-eye phenomenon in photos
•“RED-EYE CORRECTION” on page 92
Delete a part of a video clip and join video clips
•“EDITING VIDEO CLIPS” on page 95
Specify the number of prints, index print, and date imprint
•“PRINT SETTINGS” on page 83
Data managing/processing
View the settings that were in effect when the image/audio data
was recorded
•“DISPLAYING IMAGE PROPERTIES (INFORMATION SCREEN)” on page 103
Convenient
functions
Adjust the speaker
volume
•“PLAYBACK VOLUME”
on page 78
Search for image/
audio data
•“9-image display
playback” on page 44
Magnify an image
•“Magnifying (zooming
in) the image” on
page 45
Adjust the speaker volume
•“PLAYBACK VOLUME” on page 78
Protect images from accidental erasure
•“IMAGE PROTECT” on page 79
Format a card
•“FORMATTING A CARD” on page 128
Additional functions
Smooth out video
clip playback
•“SMOOTH PLAYBACK”
on page 102
Change the angle of
view
•“ROTATE IMAGE” on
page 90
Set the TV system
•“TV OUTPUT
SETTING” on page 121
3English
CONTENTS
GETTING UP AND RUNNING .............................................................. iii
QUICK SEARCH BY OPERATION ........................................................1
iiii S-AV interface cable: 1iiii USB interface cable: 1
iiii Remote control unit: 1
A lithium battery (CR2025) is
installed at the time of
purchase.
iiii Cable adaptor: 1iiii AC adaptor and power cord: 1
(CD-ROM): 2
iiii Lens cap and strap: 1
7English
iiii Camera case: 1
iiii “SAFETY MANUAL”
(safety precautions booklet)
Please read this booklet
carefully before using the
digital camera.
iiii Quick Guide
English8
CHECKING THE INCLUDED ACCESSORIES
How to use the accessories
kkkk Neckstrap
kkkk Lens cap
9English
kkkk Camera case
Media cards that can be used with this camera
The type of card that can be inserted into and used with this camera is:
i SD Memory Card
English 10
GETTING THE MOST OUT OF YOUR CAMERA
Your movie camera can not only record video clips, you can also take still
photos and make audio recordings. For example, you can snap a still image
while recording a video clip, or make just an audio recording.
Twin menus for easy operation (see pages 50 and 74)
The novice photographer will have no problem taking beautiful pictures
using the easy settings on the PAGE 1 menu.
Of course, the PAGE 2 menu for the experienced photographer provides
full control over detailed camera settings.
VIDEO CLIP MPEG4
640x480 30fps SHQVIDEO VIEW
<Example: Shooting
Setting Screen: PAGE 1>
IMAGE STABILIZER
<Example: Shooting
Setting Screen: PAGE 2>
Shooting video clips (page 34)
You expect your camera to record great quality still photos, but you can
record 640 × 480-pixel video clips as well. The maximum 30-frames-persecond shooting speed guarantees beautiful, flowing movies for you to
enjoy. Another bonus is the capability to record small file sizes that are
perfect for uploading to Internet websites.
11 English
Capture still shots while recording a video clip (page 38)
Suppose that while you’re recording a video clip, there’s a scene you’d
like to keep as a still photo. Your camera makes it possible to record the
still photo without interrupting the video clip recording.
Movable monitor for any shooting angle
The movable LCD monitor lets you shoot from any angle. Hold the
camera high to get a great view of a parade, or swivel the monitor
around to snap a photo of yourself.
English 12
GETTING THE MOST OUT OF YOUR CAMERA
00:00:15
Easy to shoot vertically oriented photos
(page 56)
A grip-type camera is compact and very easy to hold securely, but
trying to take vertically oriented photos by changing the camera angle
is a problem. However, your camera features a vertical shooting mode
that allows you to take vertical (portrait) mode still images without
having to change the camera angle.
00:00:15
00:00:15313131
Smooth out the motion during video clip
playback: Smooth playback
If a video clip was recording while the camera was moving fast, you
might see a distracting video flicker when it is played back. For a
playback that is comfortably even, you can use the “smooth playback
function” to suppress the video flicker.
SMOOTH PLAYBACK
(page 102)
13 English
ON
OFF
Docking station for easy connection
The docking station simplifies those complicated connections to your
TV or computer. Just set the camera in the docking station, and you can
view your photos on your TV or computer right away. The remote
control unit makes it even more convenient.
<Connecting to a computer (page 7 in the Software Pack instruction
manual)>
To AC adaptor
<Connecting to a TV (page 137)>
Computer
English 14
SYSTEM MAP
You can connect the camera to various devices to expand its capabilities.
15 English
Cable adaptor
Remote
control
unit
Docking station
Dedicated USB
interface cable
Dedicated S-AV
interface cable
Computer
Printer
TV
AC adaptor
(supplied)
Separately sold or
commercially available
SD Memory Card
Internet
Battery charger
(optional)
i Card reader
i DPOF-
compatible
printer
i Photo shop
PARTS NAMES
Camera
Front
Lens
Flash
<To open the monitor unit>
SETUP
Strap holder
Speaker
Monitor unit
Stereo
microphone
English 16
PARTS NAMES
Rear
Still image
shooting button
[]
LCD monitor
Multi-indicator
Zoom switch
Video clip recording
button []
Main switch
MENU button
ON/OFF button
SET button
Bottom
Tripod stand
hole
17 English
Battery/card cover
Docking station terminal
Docking station
Front
Rear
Cable adaptor
English 18
INSTALLING THE BATTERY PACK AND CARD
The card can be used after it has been formatted with the camera (page 128).
Make sure that the battery pack and the card orientation are correct.
Install the battery pack
1 Open the battery/card cover.
h While gently pressing the cover, slide it open.
2 Insert the battery pack.
h Move the latch sideways, insert the
battery pack, and firmly push it all
the way in.
19 English
<To remove the battery pack...>
h Slide the latch securing the battery
pack to the side, and remove the
battery pack.
Slide to the side
3 Close the battery/card cover.
h Lower the cover, and slide it closed.
h At the time of purchase the battery pack is not charged. Be sure to
fully charge the battery pack (pages 22, 24).
English 20
INSTALLING THE BATTERY PACK AND CARD
Install the card
1 Open the battery/card cover.
2 Insert the card.
h Firmly insert the card until it clicks
into place.
3 Close the battery/card cover.
<When removing the card...>
h To remove the card, press it down,
and then release. The card will
protrude slightly, and you can then
pull it out.
CAUTION
Do not attempt to forcibly remove the card.
i Never remove the card when the multi-indicator is flashing red. In doing so,
you risk losing the data stored in the card.
HINT
When not using the camera for a long time, remove the battery pack.
i A small amount of power is still used even if the camera is turned off, and it
is therefore recommended that the battery pack be removed from the
camera if it is not going to be used for a long time. Note that when the
battery pack is removed for a long period, the time and date settings may
be cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
21 English
POWER FOR THE CAMERA
The supplied AC adaptor is used not only as the camera’s AC adaptor, but
also to charge the battery installed in the camera.
Using the battery pack
At the time of purchase, the battery pack is not charged. The battery pack
must be charged before it can be used in the camera. Also, if the battery
power becomes depleted when the camera is being used (see “CHECKING
THE REMAINING BATTERY PACK CHARGE” on page 132), it should be
recharged as soon as possible.
1 Install the battery pack in the camera, and attach the cable adaptor
to the docking station terminal on the bottom of the camera.
2 Turn the camera off, and connect the AC adaptor to the DC IN socket
of the cable adaptor.
h Charging begins when the AC adaptor is connected. However, the
camera does not charge when it is set to the shooting mode or PC
camera mode.
h The camera’s multi-indicator lights red during charging.
h Charging will take approximately 90 minutes.
h The multi-indicator will turn off when the battery pack is fully charged.
English 22
POWER FOR THE CAMERA
Docking station terminal
Supplied cable adaptor
DC IN terminal
To power outlet
Supplied AC adaptor
Supplied power cord
3 Disconnect the cable adaptor and the AC adaptor after charging is
completed.
23 English
Using the docking station to charge the battery pack
When the battery pack is installed in your camera, you can recharge it
by setting the camera in the docking station (page 134).
English 24
Loading...
+ 162 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.