Fisher VM-6612, VM-6619, VM-6609, VM-6614 User Manual

INSTRUCTION MANUAL

VM-6609
VM-6612
VM-6614

B/W Video Monitor

VM-6619

INFORMATION TO USER

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH
THE VENTILATION GRILLS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Explanation of graphical Symbols

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.

FCC COMPLIANCE STATEMENT

FCC INFORMATION: THIS EQUIPMENT HAS BEEN

TESTED AND FOUND TO COMPLY WITH THE
LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS
OPERATED IN A COMMERCIAL ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND IF
NOT INSTALLED AND USED IN ACCORDANCE
WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS
EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO
CAUSE HARMFUL INTERFERENCE IN WHICH CASE
THE USER WILL BE REQUIRED TO CORRECT THE
INTERFERENCE AT HIS OWN EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A
RESPECTE TOUTES LES EXIGENCES DU
RÈGLEMENT CANADIEN SUR LE MATÉRIEL
CAUSANT DES INTERFÉRENCES.

1

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS -- All the safety and operating

instructions should be read before the appliance is operated.

2. RETAIN INSTRUCTIONS -- The safety and operating

instructions should be retained for future reference.

3. CLEANING -- Unplug video monitor or equipment from the

wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.

4. ATTACHMENT -- Do not use attachments not

recommended by the video monitor or equipment
manufacturer as they may result in the risk of fire, electric
shock or injury to persons.

5. WATER AND MOISTURE -- Do not use the video monitor

or equipment near water -- for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or
near a swimming pool, or the like.

6. ACCESSORIES -- Do not place video monitor or equipment

on an unstable cart, stand or table. The video monitor or
equipment may fall, causing serious injury to a child or
adult, and serious damage to the equipment. Wall or shelf
mounting should follow the manufacturer’s instructions, and
should use a mounting kit approved by the manufacturer.

6A. Video monitor or equipment and cart

combinations should be moved with care. Quick
stops, excessive force, and uneven surfaces may
cause the equipment and cart combination to
overturn.

7. VENTILATION -- Slots and openings in the cabinet and the

back or bottom are provided for ventilation, and to ensure
reliable operation of the video monitor or equipment and to
protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked
by placing the video monitor or equipment on a bed, sofa,
rug, or other similar surface. Video monitor or equipment
should never be placed near or over a radiator or heat
register. Video monitor or equipment receiver should not be
placed in a built-in installation such as a bookcase unless
proper ventilation is provided.

8. POWER SOURCES -- Video monitor or equipment should

be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power
supplied to your home, consult your video monitor or
equipment dealer or local power company. For video
monitor or equipment designed to operate from battery
power refer to the operating instructions.

9. GROUNDING OR POLARIZATION -- This product is

equipped with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.

10. POWER CORDS -- Do not allow anything to rest on the

power cord. Do not locate video monitor or equipment
where the cord will be abused by persons walking on it.

11. HEED WARNINGS -- Follow all instructions marked on the

video monitor or equipment.

12. LIGHTNING -- For added protection for video monitor or

equipment during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the video product due
to lightning and power-line surges.

13. OVERLOADING -- Do not overload wall outlets and

extension cords as this can result in a risk of fire or electric
shock.

14. OBJECT AND LIQUID ENTRY -- Never push objects of any

kind into video monitor or equipment through openings as
they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid
of any kind on the product.

15. SERVICING -- Do not attempt to service video monitor or

equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.

16. DAMAGE REQUIRING SERVICE -- Unplug video monitor

or equipment from the wall outlet and refer servicing to
qualified service personnel under the following conditions.

A. When the power-supply cord or the plug has been
damaged.

B. If liquid has spilled, or objects have fallen into the video
product.

C. If the video product has been exposed to rain or water.
D. If the video product does not operate normally by

following the operating instructions, adjust only those
controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage
and will often require extensive work by a qualified
technician to restore the video product to its normal
operation.

E. If the video product has been dropped, or the cabinet
damaged.

F. When the video product exhibits a distinct change in
performance -- this indicates a need for service.

17. REPLACEMENT PARTS -- When replacement parts are

required, be sure the service technician has used
replacement parts specified by the manufacturer or that
have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock
or other hazards.

18. SAFETY CHECK -- Upon completion of any service or

repairs to this video product, ask the service technician to
perform safety checks to determine that the video product is
in proper operating condition.

2

PRECAUTION

CONTENTS

If an abnormality does occur, turn the power switch off and
unplug the unit. Have a qualified technician perform any
repairs.

Do not use the monitor if it makes a strange noise,
emits a strange odor, or if smoke comes out from it

If used under these conditions, the monitor may cause a fire or
electric shock. Immediately unplug it and wait to make sure no
more smoke comes from it. Then take it to the dealer for service.
Do not try to repair or open the monitor yourself.

Do not allow the power cord to get damaged

Do not place heavy objects on the power cord.

•

Do not place the power cord near a heat source.

•

Do not excessively bend the power cord, modify it, or secure

•

it with staples.

Doing so may damage the power cord and cause a fire or
electric shock.

If the power cord is damaged, take it to the dealer and have it
replaced.

Do not allow dust or dirt to build up on the
power cord or power outlet

A build-up of dust may cause a short circuit or generate heat
and cause a fire.

Be especially careful when using the monitor in areas of high
humidity, in areas with frequent condensation, in kitchens, and in
places where there is excessive dust.

Periodically unplug the power cord and clean away the dust that
builds up between the plug terminals.

PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . 4

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . 5

CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . 6

Single connection . . . . . . . . . . . . . . . . . . . 6

Multiple connection . . . . . . . . . . . . . . . . . 6

BASIC OPERATION . . . . . . . . . . . . . . . . . . . . 7

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . 8

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . 9

FEATURES

Universal power (AC 100V to AC 240V) and

•

detachable power cord
2 Channel Input - A/B Channel selectable

•

Contrast, Bright control on front panel and

•

Sub-bright, V-size, V-hold control on rear panel

Cautions when plugging in the power cord

Make sure you insert the plug of the power cord all the way in

•

the power outlet. Using the monitor with the power cord not
fully plugged in may cause heat to generate and cause a fire.

Do not use the monitor with the power cord wound or tied up.

•

Heat may generate and cause a fire.
When using an extension cord, be sure that the total current load

•

of all equipment connected to it dose not exceed the specified
ratings of the extension cord. If the rating are exceeded, heat may
generate and cause a fire. Make sure to carefully read the
specifications accompanying the extension cord.

Cleaning

Dirt can be removed from the cabinet by wiping it with a soft

•

cloth. To remove stains, wipe with a soft cloth moistened with
a soft detergent solution and wrung dry, then wipe dry with
dry soft cloth.

Do not use benzine, thinner or other chemical product on the

•

cabinet, as that may cause deformation and paint peeling.
Before using a chemical cloth, make sure to read all
accompanying instructions. Make sure that no plastic or
rubber material comes in contact with the cabinet for a long
period of time, as that may cause damage or paint peeling.

SERVICE

This unit is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event
of a problem, the owner is advised not to attempt to make
repairs or open the cabinet. Servicing should always be referred
to your dealer or Sanyo Authorized Service Centre.

Horizontal resolution

•

VM-6609, 6612: more than 800 TV line
VM-6614, 6619: more than 1000 TV line

3