Fisher 59358 Parts Manual
Installation Instructions Continued
fisher manufacturing company
7
Stainless Steel Widespread Deck Faucets
Product Installation Guide
Swing
Spout
Apply O-ring
Lube Here
8
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has adhered to a strict dedication of overall value. When
you install Fisher products… you install the best.
Our hardware is manufactured with the standardization of internal mechanisms. Every piece of
equipment we make is rigorously tested in both
our modern in-house testing center and in actual
field situations under extreme conditions. Every
detail is thoroughly checked. Before we make our
products available to you, they pass each and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will replace a defective product or part without charge to
you, provided that the entire product is delivered
to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company
must be borne by you. Charges for transportation
and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon
our investigation of the warranty claim. This warranty does not cover external finish (except at date
of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.
Lever Handles
59137 - Widespread with 6” Swing Spout
59145 - Widespread with 8” Swing Spout
59153 - Widespread with 10” Swing Spout
59161 - Widespread with 12” Swing Spout
59188 - Widespread with 14” Swing Spout
59196 - Widespread with 16” Swing Spout
Wrist Handles
59323 - Widespread with 6” Swing Spout
59331 - Widespread with 8” Swing Spout
59358 - Widespread with 10” Swing Spout
59366 - Widespread with 12” Swing Spout
59374 - Widespread with 14” Swing Spout
59382 - Widespread with 16” Swing Spout
PART NO. 39969
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238
REV. A
www.noleadfaucet.com
Installation Instructions for Widespread Deck Faucets
ROUGH-IN:
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing,
contact your supplier.
Tools Required for Installation
• Pipe Wrench
• Medium Sized Adjustable Wrench
• Pipe Thread Sealant
Installation Instructions
1. Mount spout base, then tighten with washer and locknut.
2. Screw on supply line adapter, use pipe sealant on the connection, to the nipple.
3. Add a small amount of o-ring lube to the o-ring on the supply lines and tighten supply lines
in the supply line adapter.
4. Mount both control valves, and tighten with locknut. Connect supply lines to control valves
and tighten. Make sure supply lines are not kinked or crimped after install.
5. Optional DJ swivel spout, apply lube to the o-ring on the spout. Mount the DJ swivel spout
and tighten the nut onto the faucet spout outlet.
6. When installing a swing spout, apply lube to the o-rings on the swing spout. Make sure the
white snap ring is in place before mounting the spout. Mount the swing spout and tighten
the nut onto the faucet spout outlet.
7. Turn on water supply and check for leaks.
1 2
1-1/4”
4”
7/8”
8”
3
Spout Base
Apply Thread
Sealant Here
Spout Base
Washer
Locknut
4
Supply Line
Adapter
5 6
Left Control
Valve
Hot Cold
Right Control
Valve
Apply O-ring
Lube Here
Supply Line
Double Joint
Spout, Swivel
Apply O-ring
Lube Here
Loading...